SLM (Service)

Hiya,We are using Documentum/Webtop. 90%+ of our authors are Webtop-only users.There are a very small number of users who regularly manage assemblies(adding references to articles, moving articles within the assembly, etc.)with Arbortext's Documentum/WDK Adapter.The compatibility nightmare of Arbortext vs. Webtop vs. Internet Exploreris challenging.We do know how to manage assemblies using a text editor (check somethingout without descendants and copy/paste the entities and Documentum objectID references, etc. into a different checked out file), but we have balkedat asking users to do so since it is much more "programmery" than the WDK's"intuitive" GUI point-click-drag-paste.Are there other non-WDK strategies that might be more friendly to lesstechy authors that you all are using?-- Paul Nagai

Hello all,I have an error with Arbortext Editor as follows. My assumption is that it could be sorted out by using Proxy server with GET method. Is it correct? ■ Error The public Schemas/DTDs on Web can not be loaded in the environment with Proxy server■ Environment Software：Arbortext Editor 6.0 Proxy Port used：15080 Others：All correspondances without used Proxy is disconnected from the Internet by FireWall■ Details I checked "http communication" and turned out that HEAD method to confirm the external schemas/DTDs is taken to #15080 port, though the GET method to actually obtain them is taken to #80 port.Thank you very much.Kind regards,Tomomi

(Circles, squares, lines, arrows, shading, etc., NOT violent or "adult"NC17 materials, silly! 😉Has anyone developed (or come across) training materials that graphicallydescribe / depict the interaction between profiling and content reuse?We've got a document that has four chapters that have a different <chapter>for each "version" of the book and four other <chapter>s that arereferenced from both books. New content in chapters 1 - 4 that needs to bein both books must be referenced into each chapter wrapper. New content inchapters 5 - 8 that needs to be in only one book must be referenced intothe chapter and then profiled properly to suppress it from the book thatdoesn't need it.Basic stuff ... toArbortext-profiling-exclusionary-conditional-logic-friendly people. Notbasic to others. We have pretty good documentation for people who canlearn/grok this stuff from words. But wondering if we'd simplify trainingand reduce later support (break/fix troubleshooting) if we were able t

Hi Adepters,I am trying to make optional title and desc to required element from DITA base file, tblDecl.mod by removing question mark(?) .I am getting below error[cid:image001.png@01CF7438.0D59E720]If I remove question mark from title alone, its working fine.Original tblDecl.mod file given below...............

Hello!I hope you can help me out because I'm out of solution.We are currently using Arbortext Editor and we have a problem when we try to publish manuals to our WindChill server. It gives us a C++ Runtime Error.===========================================================Runtime Error!Program: C:\Program Files (x86)\PTC\Arbortext Editor\bin\editor.exeThis application has requested the Runtime to terminate it in an unusual way.Please contact the application's support team for more information.===========================================================We already had this problem and we repaired it by installing an old version of firefox with an old version of Java.Now it's working very good.But we did the same solution to the other guy and he still has the issue. We uninstalled / reinstalled, we repaired C++, we searched for any difference between his PC and the PC of the guy whose it's working. The problem isn't at the server side.The error doesn't appear in the eventvwr...BUT java left u

Is there anyone out there that is using the Arbortext suite for S1000D development? I need some resources on how to setup a project and create the SNS within the environment. Any help would be appreciated.Thanks,Jamie

I am trying to start a project in our new setup of Arbortext S1000D CSDB. I have the project created and have a starting SNS. I am ready to load my DMRL from my excel spreadsheet but I dont see where I can load one in that way on the CSDB. Does Arbortext S1000D not have a way to load a comma delimited file or excel spreadsheet with a list of template data modules? If so, how is that done and is there other resource material that I can get that would help me with this process. We are trying to get started on this project asap and it seems I am hitting these barriers due to lack of resource material on how to create this.Thank you,Jamie Starling

Is it possible to create a batch file in Arbortext 6.0 that would open each sgml file in a directory and save as an xml file?

With the feature in Isodraw 7.3 of being able to link a hotspot with data in an XML file I have been asked a question. The user wants to know "Is there a specific schema the XML must adhere to?" .Since I work on the graphics and not the SGML I do not know the answer so I am hoping someone here can answer this so I can pass it on.Thanks for your help,Keith

So... Anyone have an idea what happened to the Find menu in 6.1? The option that used to be in the menu "Find Tag/Attribute... " seems to have disappeared from the available options. Clearly one of the most useful tools in Epic 4.3.Greg

I'm using Arbortext 6.0 M020.When I cut and paste from an external document (MS-word), which I do often, a window pops up telling me: "agettext:Msgid not found in message file: CopyPaste failed to convert clipboard"It then allows me to clear or close the window. I'm not really expecting (or caring) that it is not bringing the word formatting over so this window popping up is getting really irritating. Is there a way to turn this message off?Never had this problem using version 5.3.

Dell - Internal Use - ConfidentialHi,I am getting IndexTerm error in Arbortext Editor. Please find attached the screenshot of the error. What will be the problem? Is this DTD related or any other Arbortext style error?Regards,Roopesh NavathSoftware Dev Assoc EngineerDell | PG - Information Development, India (BDC)

Hi,I made some DITA dtd constrants for figure and table. When I updated with arbortext editor changes not reflecting in editor. Do I need to change .acl and .dcf file in arbortext? Anybody can help?Regards,Roopesh

Does anyone know if there is an existing shortcut/hotkey for Tag Templates in Arbortext 5.4? If not, then is there a way to create custom shortcuts/hotkeys?

Dell - Internal Use - ConfidentialHi,I am working in DITA +ARBORTEXT in client/server environment. When I connect arbortext with server all doctypes,DCF,ACL,FOSI files are downloading to local folder.My question is when I update a DTD, is it necessary to update DCF,ACL,FOSI file to effect the changes in Arbortext Editor? Or it will update automatically?Thanks,Roopesh NavathSoftware Dev Assoc EngineerDell | PG - Information Development, India (BDC)

Hi!I've searched for hours now, but I don't find a way to format the display of page numbers after each chapter in the tabe of contents. I'm pretty sure this is possible, but if I try to add user defined formats in the table of contents, I only can change the number of the chapter and the text title. Can anybody give me a hint?Thanks and regards!

Hi all,The ACL menu_delete command works well when the menu name's just one word, like "Find". But when it has more than one word ("Find Expressions, for example"), it doesn't work.I've tried these:menu_delete .Edit."Find Expressions"menu_delete .Edit."Find &Expressions"menu_delete .Edit. "Find &Expressions"menu_delete .Edit. "FindExpressions"

When in 3D all components are separate, when you convert to 2d it becomes one image? I can ungroup untill they are free, but I loose the conection to the cad model. Can I convert to 2D and still have the components as individual components?Bryon

Ok gang I could have sworn I had these two (2) macros working before, but I am having no joy now.The macros intention is to determine the size of a graphic and then display that information. This is used so I can get "CGM" graphic sizes to pass on to our "SGML" programmers.Any and all help would be greatly appreciated. I would also like to use this as a starting point to develop a macro to scale a graphic up or down to fit to a particular page size.I am using IsoDraw 7.3 F000Keith

Does anyone know how to change the tag display size in Arbortext Editor? A teammate has somehow made her tag display size very large and is not sure how to set it back to normal size?Thanks for your help!

Hi all,I would like to create a macro to reimport the text (with Object ID) present in an XML file into a .iso file.My knowledge of IML is very basic (but at the end I manage to create a macro to apply the ID and export into XML ).Please have a look at the attached and let me know if somebody out there can help me?Thank you in advanceMax

Is it possible for a macro written in 7.2 to work in 7.1? I have written macros in 7.2 but I am now working on a system with 7.1(don't ask long story). some of the simple macros will run but on some of the more involved macros I get errors and the macro stops. Here is one of the errors I am receiving;Any help would be appreciated. I think this is a compatibility issue and I am going have to work to get back to at least 7.2 if not 7.3.Thanks,Keith

Dell - Internal Use - ConfidentialHiGreetings!Anybody can provide Arbortext Architect trial license?Thanks,Roopesh NavathSoftware Dev Assoc EngineerDell | PG - Information Development, India (BDC)

Hi,Can any one send me link to download Isodraw CAD process 7.1? is there trial version availableThanksManoj

Arbortext APP V11 M060 released is now available to Customers. See these release notes and others @ http://www.tformat.com/app-v11-m060-release-notes/