Windchill

 Description: Version: Windchill 13.0 Use Case: Fetch all unique WTDocuments of allowed types, modified on or after a given timestamp, across multiple document types, without duplicates.Description: I am using below queryspec however it is not returning the results expected, for example when I do teh search in Windchill advance search it fetched results around 300 but using queryspec it is fetching around 60. I am not sure why this discrepency is happening but please help me if you knwo something here. we can have multiple document type. Also internal name is correct. I have cross checked as well. just fetching few results not entire is confusing me.  List<Long> typeIds = new ArrayList<>(); System.out.println("getWTDocumentByLastModifiedDate allowedDocumentTypes>>> "+allowedDocumentTypes); QuerySpec qs = new QuerySpec(WTDocument.class); for (String typeId : allowedDocumentTypes) { System.out.println("getWTDocumentByLastModifiedDate

Version: Windchill 12.0 Use Case: My team is trying to fetch Shared on Date ( Date on which part or documents was shared to the project). Is there a way we can do that.Description: My team is trying to fetch Shared on Date ( Date on which part or documents was shared to the project). Is there a way we can do that. Typically that is available on the project status table for part & docs but is there a way we can get that on the folder tables in projects. 

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.0Elements on the home screen take a very long time to load(upwards of 10 minutes), mainly workspaces and tasks sections.Can someone provide guidance or steps to help diagnose or at least find clues about this issue?

I am using Windchill PDMLink Release 13.1 and Datecode with CPS 13.1.2.4test community, This is community Check points, Please ignore

Version: Windchill 13.1 Use Case: Install Windchill 13.1.1.0 on Linux (Red Hat based Rocky distro - version 8.10)Description: Version: Windchill 13.1 Use Case: Install Windchill 13.1.1.0 on Linux (Red Hat based Rocky distro - version 8.10)Description: So far successfully installed and set up the following components:Oracle Database 19c (19.3)OpenDJ 5.0.3-1Java 21 (Amazon Corretto)I am trying to install Windchill with the PTC Solution Installer (PSI), however the installation always fails (tried already to rerun multiple times, by clearing PSI caches) with the error: Windchill Loader failed.Checked the logs inside : <Windchill_Installation_Location>/Windchill/installer/logs/<installationtime>_WindchillLoader_error.logHave the following error:wt.util.WTRemoteException: Unable to ping server manager; nested exception is:wt.util.WTRemoteException: Unable to locate server manager; nested exception is:java.rmi.ConnectIOException: Exception creating connection to: myloca

Version: Windchill 13.0 Use Case: Trying to find the correct Custom Modeled Enumeration to add to the Downstream View (currently only Design and Manufacturing).Description: I want to create another option for the Equivalence Network and that looks like it is the same modeled enumeration as the Downstream View in the BOM Transformer so I am trying to find the correct custom modeled enumeration to make the change. 

Version: Windchill 13.1 Use Case: Show few set attributes from wtpart to UDI Super Set details page, user will update these attributes on Part those should be reflected directly on UDI Super Set. Also want to know if part is iterated to update attribute values or revised what will happen? what will happen if multiple parts linked to one udi super set? Can this be achieved using alias attributes? If yes how?Description: Show few set attributes from wtpart to UDI Super Set details page, user will update these attributes on Part those should be reflected directly on UDI Super Set.Also want to know if part is iterated to update attribute values or revised what will happen?what will happen if multiple parts linked to one udi super set?Can this be achieved using alias attributes? If yes how? 

Version: Windchill 12.0   Use Case: We are publishing Solidworks CAD using Creo View Adapters in Windchill 12. The default representation is created as a PDF document. We would like to customize the name of the PDF to include the Revision Info, but renaming the PDF is not supported if it is the primary representation type. If the file is renamed, it cannot be opened in Creo View directly from Windchill because the name is different. Description: Curious if anyone is using a format other than PDF for their primary 2D representations created in Windchill for Solidworks Drawings? DXF maybe?    CVA supports the following 2D formats for Solidworks: DWG, DXF, EDRAWINGS, PDF & TIFF   We have a customization that will rename the PDF files to a more user friendly name along with the Windchill revision. Unfortunately, PTC does not support renaming the primary representation, only secondary content.    Is anyone using DXF as their primary representation in

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.2We have several users who receive an error when accessing their Windchill workplace:Windchill ErrorContact your administrator for assistance. The following is the reference information.Request ID: 4eijagow;mm35x217;408;svgrmk;80046Request URI: /Windchill/ptc1/workspaces/MyWorkspaceQuery string: AjaxEnabled=thirdLevelNavStatus code: 500Exception: java.lang.IllegalStateException: getReader() has already been called for this requestWe have found a workaround, possible from the client but not from web access. If the user goes to ‘File -> Server Management -> Workspace’, selects one of their workspaces and activates it with the right mouse button, it starts working again. The problem is that we have different users who have many workspaces, and performing this task on each user/workspace takes a long time. Is there a way to check what is causing this ‘problem’ and whether we can fix it for everyone centrally?Thank

I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.1.8"com.infoengine.exception.fatal.IEInternalServiceException; nested exception is: java.net.SocketException: Connection timed out (Read failed)" when the client attempts com.infoengine.SAK.Task.invoke() of webject task.Specifically, the Remote Importer attempts to process a “revise” command against a Windchill Drawing EPMDocument.The connection times out at the beginning of processing when trying to query the Drawing EPMDocument

The 'Display Part Allocation Status' icon is greyed out when 'Show Occurrences' is enabled in Process Plan Browser in Windchill MPMLinkDisplay Part Allocation Status feature should be available also in Occurrence Mode in PPB.

Version: Windchill 13.0 Use Case: View attribute not available on the part creation page. using OOTB OIR.Description: View attribute not available on the part creation page.

I am using Windchill PDMLink Release N/A and Datecode with CPS N/AIn windchill browse libraries LES Print Non CAD is there any possibilities to show folder in dropdown get product name as dropdowns (shows folders in it).

Version: Windchill 13.0 Use Case: User created several variants for parts in the system, but he cannot show "Configurable Modules" table, and he wants to know from what configurable module specific variant was created. We suppose that user needs either PTC Author license of Windchill Premium license, but I can't find confirmation in logs for StandardNmRoleAccessServiceDescription: It is possible to add table called "Configurable Modules" - it shows the part that was the "context" from which the variant was created User created several variants for parts in the system, but he cannot show "Configurable Modules" table, and he wants to know from what configurable module specific variant was created. We suppose that user needs either PTC Author license of Windchill Premium license, but I can't find direct proof and confirmation in logs for StandardNmRoleAccessService Tried with such setup and there is no table with "Configurable Modules" visible  

Version: Windchill 12.0 Use Case: New users with Windchill access can add models to their workspace from the browser and edit them, but when they try to do so from CREO, it's not possible. Error messageDescription: New users with Windchill access can add models to their workspace from the browser and edit them, but when they try to do so from CREO, it's not possible. Error message: "Server error: wt.util.WTRuntimeException: ATTENTION: Secured Action. You do not have the necessary authorization for this operation. Contact your administrator if you believe you have received this message in error. Nested exception is: (wt.access.accessResource/19) wt.access.NotAuthorizedException: ATTENTION: Secured Action. You do not have the necessary authorization for this operation. Contact your administrator if you believe you have received this message in error." In the browser, you can see all the models in the workspace. But the Creo workspace is empty. I'll appreciate your hel

This evening, when several students tried to check out files from our Windchill server, the check out failed (and check in) and this error message came up in the Event Management console: "WTRuntimeException: ATTENTION:  Secured Action. You do not have the necessary authorization for this operation. Contact your administrator if you believe you have received this message in error. Nested exception is: (wt.access.accessResource/19) wt.access.NotAuthorizedException: ATTENTION:  Secured Action. You do not have the necessary authorization for this operation. Contact your administrator if you believe you have received this message in error"   Also, when I go to Open and Windchill Commonspace, not

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.8Resolve issue with custom Javascript function invocation for an action integrated in Creo embedded browser (Custom check-in wizard Toolbar/MenuItem action)Here are the errors that I facedNew custom action in Creo browser for custom check-in page not working

We are in he process of implementing the Supplier Management module and one question we've been going back and forth on is where do we put the Supplier Parts.Originally I was thinking that they would be in the same container that the OEM part was in. But after thinking about it, we have several cases where there may be OEM parts that use the same Supplier Part and live in different contexts. Of course we'd love to avoid that situation from happening but the data we have is the data we're stuck with and all we can do is hope to prevent it from getting worse.What we are thinking right now is having one library for just Supplier Parts. This works well with COTS parts, but from a security standpoint if we use Supplier parts for our custom parts then we may have to think about more control.Love to hear how others have this setup and pros and cons to the current method.Today in production we have 4 pairs of attributes for manufacturer and manufacturer part number. This will give us a lot mor

When instances are added to the Family Table, I want an auto-generated number to be created for the instances according to the CAD Document auto-numbering scheme (as defined in OIR). The member name for the instances added by the user in the design table should be overwritten by an auto-generated number, according to the existing CAD Document numbering scheme in OIR.   There is one preference : Workgroup Manager Client ▶ Family Table Instance Creation ▶ Auto Generate Family Table Instance Number This is only for Autodesk, NX and Solidworks.   Does any similar preference exist for Creo as well?   Any help is appreciated.   Regards, -Arindam

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M030-CPS14Having an issue creating a custom recipe for a work package via api calls. The setRecipe api I'm attempting to use returns a null value. Is there another way to create a custom recipe by way of a customization? If not, can anyone assist in why the setRecipe api is not working? Below is a snippet of the code I'm using to try and set it. I had a logger with a getRecipe call and it returned null.PersistedCollectionRecipe recipe = PersistedCollectionRecipe.newPersistedCollectionRecipe();// Set collector options on the recipeString COLLECTION_OPTIONS = "" + "CADDOC_DEPENDENTS:None," + "ASSOCIATED_WTPART:None," + "DRAWINGS:None,"+ "FAMILY:None," + "GENERICS:None," + "ASSOCIATED_EPMDOC:None," + "ASSOCIATED_WTDOCS:None,"+ "RELATED_NOTES:None," + "CHANGE_ACTIVITY_RESULTING_DATA:None," + "CHANGE_OBJECTS_AFFECTED_DATA:None," + "PUBLISHED_CONTENT:All," + "PROBLEM_REPORT:None,"+ "VARIANCE:None," + "CHANGE_REQUEST:None";recipe

I am using Windchill PDMLink Release 13.1 and Datecode with CPS 13.1.2.0Unable to see the Custom Tabs on IKEA Part - Post Upgrade Windchill 13.1.2 from Windchill 12.1Here are the errors that I facedCustom Tabs showing ????

I just wanted to display the promoted-on date for CN which is in Resolved state in QML. But at the same time, I am displaying change notice which is in other states also in the report. For those, which is in other state, I don't want to display the promoted-on date. Can anyone help?

Version: Windchill 13.0 Use Case: How can we install the standalone apache for split configuration of windchill .The apache should be installed in different machine than windchill.Description: How can we install the standalone apache for split configuration of windchill .The apache should be installed in different machine than windchill. 

PTC can provide a structured roadmap to become proficient in working with PTC Windchill alongside AI tools.

Version: Windchill 13.0 Use Case: We are using options and variants, as well as classification. There is some overlap between options/choices and attribution on the classification node to support search and retrieval.Description: It seems inefficient to duplicate options and choices into the classification taxonomy and have users perform double entry to maintain the classification attribution. I haven't been able to find any out of the box configuration options or tools for this, but it seems our situation cannot be unique and I am curious if any other customer has successfully worked a solution for this. At first glance it seems there are two routes to explore.1) Customize at the data entry/creation step to force options and choices to drive attribute values onto the item2) Customize the search/retrieval to include classification, attributes and options and choices. Anyone have any other suggestions to share?