Archive Read Only

Hallo,weiß jemand, ob die PE 3.0 höhere Anforderungen an die Grafikkarte stellt als das bei der PE 2.0 der Fall war? Ich habe zu Hause nur eine "On Board"-Karte. Damit gab es schon bei der PE 2.0 Probleme, aber es ging dann. Sind neue Probleme bei der 3.0 zu erwarten?Michael

Hi, I made my own spread sheet for holes with the coarse thread only. It works great until I make a clearence hole it default to close fit. Any Idea on how to change this to medium fit by default. Thanks Nicolas

Hi Pros!I just got a word from my sales rep that pro/mesh is "retired" and now available inside of advanced mechanica. Can anybody confirm this?

Pro E users, How do you create a elliptical dome? Where the base of the shape is anellipse. BradWF3

Hello,When I run PTCStatus to see what licences are available and in use on theserver, it reports a number of Flex_Eng packages and a number of FoundationAdvantage packages. In addition, there are some Mech_Foundation packages andsome Process_Modeler packages. Then there are some Advanced_Assembly setsand some Advanced_Surface sets.I am clear about the Foundation Advantage packages, and I think the Flex_Engpackages are probably Flex Advantage packages. However, do you know what aMech_Foundation package and/or a Process_Modeler package might be?I guess if I grab an Advanced_Assembly set and an Advanced_Surface set atthe time of starting a Foundation Advantage package, I effectively haveanother Flex_Advantage package. What can I do to make the Mech_Foundationand Process_Modeler packages into something useful? This is Wildfire 2, so it is historic Pro/E - as close to collectible assoftware gets... Regards,

Hello,In ProIntralink if you were to accidentally modify a file in your workspace which was not supposed to be modified then you could click on it and select UPDATE to make it same as the Commonspace copy. What is its equivalent in PDMLink? That is, if I accidentally modify a file on my workspace and want to make it same as the file in the Folder, how can I do that. Please help.Thanks,Shridhar

Is it just me or is the forum search stuck on a date range of "Today".It will not return results for any other day...Thanks,Mike FosterATK

In WF4 you could get sketch points which could be used in EMX to put in mutiple bolts or ej pins. Is there a way to sketch a group of points in WF5?

Just looking to see if anyone has any experience or information on the effectiveness of PTC Partner Apriori cost management software.

Just looking to see if anyone has any experience or information on the effectiveness of PTC Partner Apriori cost management software.

Not sure where to ask this question, but I am having formatting issues when posting to the forums. I need to ad html code to format my text and paragraph's or the post shows up like a run on sentence. Is there an option that I need to toggle? I purposely made this post without adding my own html formatting code to show you what the end result looks like by default.It makes everything hard to read.

Is anyone else experiencing difficulties with their Space Pilot loosing focus when multiple windows are open in Pro E? It seams that if multiple windows are open the Space Pilot will loose focus on which one is current and will start working on a window in the background. We also use our Space in other applications and I can't say what effect this is having.This issue doesn't happen every time multiple windows are open but it does happen frequently and I never experienced it in the three or four years prior with WF 3.0.Thanks

OK I'm going out on a limb and posting my resueme.I'm basically on my second career, and pro/e is it, I've been working with it for about three years, and think I'm pretty good.........But some of these companies I apply too don't think I'm so great, and I get turned down a lot.So what do you think....... is it, good - bad - stupid - acceptable - great.I don't know a whole lot how the corporate world works, and what they are looking for.I put myprofessional experence pro/e experiencelife expereincehobbies.I hope the file uploads, you'll need MS Office 2007 to view itThanx

Hi thereAre there any of You who work on trucks, like build-ups?You can see of my work on my documents. I would like to compare to your work.Who knows maybe we can help each other.RegardsChris

Hi All,Could you all please explain me nmsd and pro_comm_msg.exe is all about and its use.Regards, Prashant Shetty .Go green .

Interested in the latest PTC/CoCreate news? Follow us on Twitter: http://twitter.com/xandorra

I am using Wildfire 4, and I am trying to calculate the volume of the "empty" space in a fully assembled gearbox to determine the proper amount of oil that should be used for lubrication.I know that Pro-e is great at determining volumes of solids, but what is the best way to calculate the amount of free space in an enclosed housing that is assembled with the gear solids in place?Is this the right software for this exercise or is there an "add-on" that I should be using?Any tips on doing this would be greatly appreciated. Thank you.

I have gone through some links for .stl topic, but I cannot find direct answer if there is any way to make a quilt from .stl file (without REX modul)?

I already sent this out on the ETC forum and only had a couple hits on it so I will try this forum so sorry in advance if you recieved this twice.I am looking for help converting a Unigraphics file to a WF5 compatable file. A .prt would be great but a good .stp file would work just as well. If anyone could help me out with this, it would be much appreciated. I know we tried an iges file and curves were not attached and needed clean up before it would be usable. Not sure whatit would beusing the actual file and how much clean up work would be needed butI will send the file to only those that respond with interest in helping a fellow user out.Thanks in advance,Shane V.

We are still using WF 2.0 (M270)... We have always been able to open an Excel file directly from the Filelist in the browser. It would open in a separate window, which is veryhandy for searching parts lists etc. We just got one of the regular Windows updates, and now thisfunctionality does not work. A right click on the file brings up theopen/ open in new window/ etc. menu, but it does not work. A doubleclick doesn't work any more either. Any ideas? Chris NelsonProduct Engineer727-538-3561CONFIDENTIALITY NOTICEThis electronic message is confidential and may contain legallyprivileged information intended only for the use of the individual orcompany named above. If the reader of this message is not the intendedrecipient, or the employee or agent responsible to deliver it to theintended recipient, you are hereby notified that any dissemination,distribution or copying of this communication is strictly prohibited. Ifyou have received this communication in error, please immediately notifyus

Does anyone who knows PTC applications in the automotive field?

Anyone hostingan internal company web forum for CAD/PDM support? I am looking for recommendations on web forumsoftware I can host on an internal web server (inside firewall).Simple to useand easy to mantain being the top priorities...

Hello Friends,I am in search of a freePro/E model of a bolt action sniper rifle.I have looked at many of the sites such as Turbo Squid, 3DStudio, Mcaduser, 3DcADBrowser,but did not find what I need.Any of you have a nice model?Thanks in advance,Ronnie Shand

File Auto save option in Pro/E

Does anyone have a UDF for Helical Gears. Can you share it please. THX!Regards, Will Swank