Archive Read Only

Used to have an option in WF3.0 under Tools/Environment/3D Notes, which you could turn them on/off, where is this option in wf4.0?

Is there a translator that can be utilized in Pro-E's sketcher so I do not have to draw the individual letters and characters?

When I go to open or save a file from SD or Annotate, the default directories are obscure and sometimes don't exist. Where do I set those directories? I have found the Doc-project-dir in sd_data.lsp and the startupdir in all_data.lsp, but they don't seem to impact the directory presented in the open and save windows.

Does anyone still have a copy of the Pro/CONVERT (any version, any platform) software hiding in their CD library?I'm also interested in copies of any Pro/CONVERT documentation if anyone has any?Thanks in advance,Sam

I am using WF3. I see that pro-e saves an new version everytime I hit save. How do I open the previous versions?

Pro Gurus:Let assume that the lamination stator stack is .350" height, 1.5" OD, .700"ID. It has 18 winding slot and each slot is skew 20°. The winding slotlooks like twisted helix instead straight. What is your approach to modelthis twisted slot? What is the proper formula to create this helix likeslot?Advance thanks for your time and help.

Hello,I have two parts I am trying to flatten, can someone please take a look at the files for me ? Parts are attached......Thanks in advance.David RiderMuller Martini Mailroom Systems

Hallo, is there a secret reason why sometimes I am able to remove material from revolved bodies and some others I am not?

Does anyone know how to convert files from WF5 to earlier versions? Thanks

I have WF4 M040 loaded. I just installed M060. When I start M040 I have no problem but when starting M060 I receive anwarning message:Windchill cache must be converted to 2008 format.Press OK to convet, Cancel to exit application.We are still use WF3 but I am looking at WF4. Did anyone else receive this error and will it present a problem for me when going back to WF3? Would I not recieve this error if I deleted all my workspaces and the PTC directory on my computer?Steve G

My Favorites list in the Pro/E file browser keeps getting deleted ever sincewe went to WF3. Can anyone tell me where pro/e keeps this list, so I canattempt to diagnose the problem? Has anyone seen similar behavior? Thanks . -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>

This did the trick. Thanks for all the quick responses.Bob FrindtSr. DesignerParker Hannifin CorporationParker AerospaceGas Turbine Fuel Systems Division9200 Tyler BoulevardMentor, OH 44060 USAdirect (440) 954-8159cell: (216) 990-8711fax: (440) 954-8111-www.parker.comGrove Janet <-> 04/30/2009 02:17 PMTo'Robert Frindt' <->ccSubjectRE: [proecad] - RE: &todays_dateTry %yyyy/%mm/%dd HTHJanet Grove - 319-292-8058

Try....%yyyy/%mm/%dd Thanks,Allen Caldwell Allen Caldwell | PDC Manager | Project Engineer | 952-435-5533 x114EAC Product Development Solutions |

Is anybody else experiencing a long delay (+5 minutes) when logging into ptc.com - or am I just that special? This has been going on since late last year... their web support deferred to a Java issue, which I tried without success.Anybody else experiencing this?-TerTerrence (Terry) McFallCAD Systems AdministratorVarian Medical Systems911 Hansen WayPalo Alto, CA 94304650-424-6039 desk650-799-0179 cell

Way back in February, there was some noise on the exploder regarding compatibility of the eDrawings program and WF 4.0.Are there any known issues with the current version of eDrawings and WF 4.0 ?WF 4.0M080No Pro/IThanks,Bob

It seems that several folks have had issues with FF & the downloadmanager. Not sure what it is, but I just killed it and I'm going backto HTTP. Others also mentioned that I should only do 2 at a time, which I recalltrying to do more than 2 downloads would hang up IE as well. Thanks,Doug Schaefer

Hey, I'm sort of new to pro e (again), last version I used was wf2, but now I'm on wf4. I used it a while at a previous job, went back to Solidworks, and now I'm back. So, I'm sketching (it's all coming back to me, though a bit slowly), and I spasticly clicked something, somewhere (don't know what or how) and made all my sketch dimensions became reference dimensions, and I don't know how ot turn them back ot normal dimensions. The easy solution is to delete all my ref dimensions and place them over again, but it woudl be nice to know what I did and how to undo it for future "reference"... Thanks, BM

Can anyone confirm the rumor... with documentation, that WF5.0 will have accuracy absolute only? If so I'm curious what the default value is? Anyone currently using absolute now ? if so what value ? any conflicts or problems ?ThanksSteve

Hallo, ich habe ein Problem, und zwar kann ich die auf meiner Personal Edition erstellten .pk2-Dateien nicht auf einer lizenzierten Version (15.50 B) Öffnen und umgekehrt kann ich auch die .pk2-Dateien, die auf der lizenzierten Version erstellt wurden in meiner persönlichen Version nicht öffnen. Weiß hier vielleicht jemand, ob es eine Lösung für das Problem gibt, oder ist es nicht möglich? Gruß Michael

Is there anyway to automatically calculate pre anodized dimensions using proe?

Is co-create software downloadable for free so that i can try at home for fun...? If so please let me know so that i can play with that.I am planning to build some simple blocks for hooby collection. -Chander

I have no experience with Pro-E. What would most people recommend for me to 1. obtain a copy of the software (personal use only) so looking to find best deal. and 2. How to learn the software. (books, online tutorials, classes, etc.) Can I learn this software on my own by playing with the softare and reading some tutorials?? where do i get the software???

All, Can any tell me if the default options in the dashboard are modifiable?What I am after is: in the extrude icon after placing my sketch, I do morecuts than I do protrusions, I would simply like for the dashboard to defaultto a cut instead of a protrusion. Is this possible? Thanks Kelly No virus found in this incoming message.Checked by AVG - www.avg.comVersion: 8.5.287 / Virus Database: 270.12.3/2076 - Release Date: 04/23/0906:30:00

Pro/USER's, Has anyone found a way to get at, and modify the ProductView 9.1 Splash Screen (picture attached)? -- George Leonard,Space Systems/LoralT:650-852-5215F:650-852-7170

We upgraded to WF3, M160 this week. Suddenly, we're having issues with ourdxfs. When the plasma operator pulls up the dxf in the software that theyuse to nest the parts together, lines are missing. Is this something the rest of you have heard of? If so, what can we do tofix it? -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>