Archive Read Only

Does anybody have any idea when the ""migrating our registration process to a new platform"" will be finished?

I sent this summary out yesterday afternoon however I only sent it tomyself so this time I am really sending it to the list.I have now gotten a response out of PTC tech support:

Ho installato la versione Personal Edition del programma; avrei la necessità di creare dei fori filettati ad esempio M6x10 M7x15 ecc. con tanto di preforo standard. Non riesco a trovare la libreria standard relativa ai fori lisci o filettati. Dove si trova? Dove devo eventualmente scaricarla? Un programma di modellazione 3d così legata al disegno tecnico non può essere sprovvista di tale accessorio!!! Grazie per l'aiuto

My problem was the sketch not the relation. The text flips aroundcenterlines so just use construction lines instead. Problem solved.Thanks Everybody,Eric

Has anyone had problems linking mechanica 3.0 with pro/engineer. I wasrunning through the tutorials but eventhough both are loaded. Proe hasproblems fully linking to mechanica 3.0. help please.Evan

how to create a library using pro-e wildfire2 an how to use mapkeys in pro-e wildfire2

Hello, In the system information it says that the Expert_Framework option is installed, but I don't find the menu in Pro/E Wildfire 4... Do I have to set some options? thanks, bern

Dear sirs, I have installed my free copy of COCREATE Personal Edition italian version I need to perforem on solid surfaces standard threaded Holes M5 M4 M3 etc... Where is possible to find and download the necessary modules or library to perform them? And which is the procedure to update the program? Thank you very for cooperation.

Hallo, für einen Flugzeugrumpf habe ich eine schöne Freiformfläche mit Fläche hinzufügen erstellt, die den anforderungen nach tangentialen Übergängen erfüllt. Mit den Lodt- Funktionen könnte ich nur Körper erstellen, die an deneinzelnen Profilebenen immer einen Knich hatten. Selbst mit allen möglichen Einstellungen zu den Tangenten bin ich nicht zueinen befriedigenden Ergebnis gekommen. Die Fläche sieht sehr gut aus, nur leider ist nur eine Fläche. Habe jetzt hinter der Fläche den ""Rest"" mit ebenen Flächen dazuerzeugt. Kann ich diesen ""Würfel"" mit einer Freiformfläche zu einem Körper machen? Danke für die Hilfe! Konni

How can I delete a certain segment of a line which is crossing over another line? IE, if I have a circle and a line passing through it, I want to delete one side of the circle with the deletion ending at the line so an arc is created. Thanks!

How to [/url]

Associates, I have a user that wants to make a series of dimensions fromdifferent features equal to the same value (IE. d1,d12,d33,d744=50). Doesanyone know if this can be done with relations and what the syntax wouldbe? Thanks.Dave

As promised:

...sorry reposting to the "correct" forumHi,We are negotiating with PTC for our software maintenance. Fun Fun Fun.If you are willing and or permitted to share the following information, I will add it to a summary and repost it for all our sites to reference.I will not post or forward anyones email on this matter, as it may be a problem for some. I fact after extracting the info for the survey I promise to promptly delete your reply and post only the "sanitized" responses to the following survey questions.If you would reply with the followingNumber of Seats under current contract ?% off list price for maintenance contract ?Type of contract Gold, Platinum, or Premium? reference:

Hi,We are negotiating with PTC for our software maintenance. Fun Fun Fun.If you are willing and or permitted to share the following information, I will add it to a summary and repost it for all our sites to reference.I will not post or forward anyones email on this matter, as it may be a problem for some. I fact after extracting the info for the survey I promise to promptly delete your reply and post only the "sanitized" responses to the following survey questions.If you would reply with the followingNumber of Seats under current contract ?% off list price for maintenance contract ?Type of contract Gold, Platinum, or Premium? reference:

Ich möchte eine Schnittkurve von 2 Körpern erstellen, aber die Schaltfläche bw. die Funktion im Menü 3D-Kurve für ""indirekt erstellen"" -> ""Kreuzung"" ist nicht vorhanden. Wieso, gibts das nur in der Vollversion? Mit dieser Funktin ließen sich ja sicherlich auch die Schnittlinie zwischen 2 Areitsebenen erstellen, oder? Danke für die Hilfe! Konni

Check out https://twitter.com/Did_You_Know for free Pro/ENGINEER tips & tricks

Nach dem Absetzen der Hilfslinien erscheinen diese nicht sichtbar auf der Arbeitsebene. Dreht man die Arbeitsebene, so sieht man angedeutete Linien, welche inrgendwo auf der Arbeitsebene enden. Auch die Auswahl einer anderen Hilfslinienfarbe brachte kein Ergebnis. Vielleicht hat jemand einen Lösungsvorschlag für dieses Problem.

Die Hilfslinien stellen sich, wie im Anhang ersichtlich dar.

Nach dem Absetzen der Hilfslinien erscheinen diese nicht sichtbar auf der Arbeitsebene. Dreht man die Arbeitsebene, so sieht man angedeutete Linien, welche inrgendwo auf der Arbeitsebene enden. Auch die Auswahl einer anderen Hilfslinienfarbe brachte kein Ergebnis. Vielleicht hat jemand einen Lösungsvorschlag für dieses Problem.

I was reading about other alternatives to Windchill for PLM, when I cameacross this story Topic: Alternative Data Management Software:

Is it possible to have UDF reference the same reference model? Since every UDF creates its own reference model it creates somebaggage. I was thinking wouldn't it be nice to combine some into one model. A simple box gives you 6 sides to create multiple simple UDFs on. Anyone know if this can be done?Thanks!Jason

Thanks group. I installed the latest JRE and of course it worked. Ihave set this up many times, not sure why I forgot that. Once I sawthat link on the tkwizard page thats all I was going to do. Bad move. Thanks, Mark

Does anyone know,... is there a way to create or import a custom cross hatching patter in WF 3.0? I need one for concrete.Chris Benner

How do I round all external convex and concave edges, but not the internal ones?Anyone have a guess, as to a way that is easier than just selecting all of the edges?Brian S. LynnTechnical Coordinator, Product Engineering