Archive Read Only

http://www.ccgg.nl/

http://www.cocreate-j-user.gr.jp/index.html

http://www.me10.de/

http://www.cocreateusers.org/forum

I have been informed by someone at my university that it is possible to upgrade wildfire 2 SE to wildfire 3 SE, i have wildfire 2 student edition but the uni now has wildfire 3, they dont interact as in cross referencing. have i been wrongly informed? thanks

Hi, I successfully created my first model :cool: , now I would like to share it with a friend. Are there any 3D outputformats supported, which I can send via email? 😮 Cheers, hansge

Hi all, Based on our business requirements,we need to make link between sketched curves & standard hole(not referenced with that curve). (i.e the sketched curve has same profile & dimensions of the required std hole(ex:M20)which has to be linked.) so if any one modifies the curve dimensions such as major dia,pitch,thread length & so on.,it will be reflected to the created standard hole. please help me out to solve this query & let me know your ideas at the earliest. With regards, SathishKumar.P

Is there any way to do this without opening each file & manually delete old versions? It is too risky opening explorer & deleting files. Any help would be appreciated. Thanks

http://www.cocreateusers.org/forum/index.php

I've been asked to investigate the pros and cons of installingPro/Engineer and serving it from a network location versus installing itlocally for each user.Can anyone point me in the right direction, or share theirexperience/viewpoint?Thanks!Michelle McMastersBlack & Decker Hardware & Home ImprovementEngineering Systems Administratormichelle.mcmasters@bdhhi.comIMPORTANT NOTICE: This message is intended only for the use of theindividual or entity to which it is addressed. The message may containinformation that is privileged, confidential and exempt from disclosureunder applicable law. If you are not the intended recipient, you arenotified that any dissemination, distribution or copying of thiscommunication is prohibited. If you have received this communication inerror, please notify the sender immediately. Thank you

Hi everybody Does anyone know,if it is possible to change the browser from IE7.0 to Firefox in wildfire 2??????? Best regards from Denmark Claus Overgaard

All, Has anyone tried using the technique below to put their company logo intheir format? In theory, if I can put text into a table and call a symbol out using aparameter in the text, then it should be able to display a symbol in atable. Presuming that one can control the position of the logo within thetable, then the advantage would be that I have the logo associated withthe table (which is copied in) vs. the .frm file itself. Thus, the logowould move around with the table, and be removed when the table isremoved. Does that sound doable? Has anyone tried this? JD

The text below is what I used to use in 2001 to put a symbol into textor a table.&sym(\symbol_name)How can I get the same thing in WF2? TIA Eric FlemingITT IndustriesITT Water Technology, Inc.Engineering Technician2881 East Bayard StreetSeneca Falls, NY 13148Phone: 315-568-4543Fax: 315-568-4507-

HI, I need some help to create a domed oval. I assumed that I would use a revolve with a relation calculation to define the length from center to edge as it revolved. Could anyone help with this calculation? To clarify what i was thinking, let d1 = length from center of revolve to outer edge. I need to say "at revolve angle 0, d1 = Rx" then "at revolve angle 90, d1 = Ry" then "at revolve angle 180, d1 = Rx" then "at revolve angle 270, d1 = Ry" and then d1 = Rx again on full revolution. Any other ideas would be helpful, thanks, Peace, Peter

Jim, try 84.80 (certified) or 91.36HIH Uwe Engineering Office Uwe DriehausIm Brachfeld 6D-53819 Neunkirchen-Seelscheid fon : +49 / 2247 / 74 55 90fax : +49 / 2247 / 74 55 91 <http: www.driehaus.de="/> www.driehaus.de

Pro Gurus:Thank you all for your help.The relationship #1 is working for me.

Has anyone used the compare sheet to picture in the analysis toolbar?Did the File/Integrate work? Thanks,John Wildfire 2

Holy crap am I old..... _____ From: - On Behalf Of SteveHuffman Since 1988... Draftware Inc began offering viewing solutions forComputervision CAD users in 1988, with the release ofDraftView for Personal Designer <http: www.draftware.com=" dvpdhome.htm=">. DraftView is now widelyused by large and small companies, worldwide, in over 30 countries.

In summary, not many people seeing this issue. Root problem is using PST's in the first place, on an older version of outlook...::responses::..

Hi all, Just a question did you allready have problem like us ? We are client of PTC for about 10 years We want to level our oldest fixed licences (which have an maintenance program at 4000$ to a FAP products which have a maintenance program about 2500$) But as Small Factory, we need to pay to have a downgrade and the maintenance program at 4000$ don't gives more possibilities than paying more and more than the FAP version. We do not have more upgrade program in thoses twice products !!! And by other ways I saw, that FAP maintenance is about 1500$ (22/3/03) at PTC. So Why do we pay twice upper for the same product ? Conclusion : Nice to be old client!!!

Just checking to see if this thing is on.Been quiet todayOr did I get thrown off again

Is there a way to grey out the delete all versions option in the filemenu? Is there a filter to allow for the selection of just planes, or justsurfaces? PrestonWEINTRAUB ENGINEERING LEAD--STOVETOP FIRESTOPWilliamsPyro200 Greenleaf StreetFort Worth, Texas 76107817| 870.8022 Direct817| 872.1500 Ext. 122817| 872.1599 Faxwww.williams-pyro.com <http: www.williams-pyro.com="/>

Can the default co-ordinate system be replaced with another co-ordinate system?

I was basically just wondering if anyone out there has any experience with a 3D scanner that works well with Pro/E. If you have any suggestions or experience I would like to hear about it. My company is starting to look in to one and would like some suggestions. Thanks.

Hi, I need some information about symobls in Pro/E fild fire2 How to create symbols and what is"*.sym" file formate could you please any one explain this Thanks Jagadhees