Archive Read Only

I thought this would be easy to find, but maybe since I don't know anythingabout the electrical world, I couldn't find anything on the sites I looked. Anyone know where to find cad files of a Packard connector. My specific oneis a single pin connector. Very simple, but... Most any importable file type would be welcome. Thanks

Dear Gurus,When i create a new material in Pro/Mechanica integrated mode, the file isavailable for that working directory only. How can i save the file so thatit can be used for all the required directories.Also can some one help me to get the resource of the material propertiesdata?Regards,Dharmesh.

Anyone have any ideas why an MFC DialogWindow created in 2000i2 shows thefollowing message when display:'dbg_err_crash() - continuing from serious error (ORDER_DEBUG)'So far I have not had any problems, but it does worry me.Do you know why?Please give me a favour,my email: chenxi20000@sina.com.cnthanks a lot.

Associates, I have just installed Productview on a PC in our marketing department so that they can create some promotional literature. The software launches fine but whenever I attempt to open a .ed file I get an "it is an unrecognized file type" failure message even though I have the file type set to "Product Structure". When I install the same software on my work station everything works fine. Any ideas?Dave

http://www.columbian.com/12032004/clark_co/218546.html1st

hi,I analyze a stress distribution of a structure using static analysis inPro/MECHANICA integrated mode, what if i check the measure of convergenceof the analysis and find that it is not converged, what should i do tomake it converge? Please advise, thanks.regards,Soon Tong

I'm developing some concepts for a Hummer self protection system. Doesanyone know where I can get a ProE model of the military Hummer? I'm alsointersted in the Stryker if available.I went to hummer.com and got some overall dimensions, but that's thecommercial vehicle. It would take me a week to "fudge" the rest of thefeatures.Thank you,Wayne

anybody using this to publish 3D proe models?

I am currently using Pro/MECHANICA to analyze a struture comprising ofsteel and aluminium. To analyze whether the structure will fail undercertain load, i have to filled in the tensile yield stress of materialswhen editing the material. Is that we have to impose certain degree ofsafety factor to this tensile yield stress? I am in a dilema about whatsafety factor should i use for. Besides, there are 3 types of criteria totest for failure of structure(distortion energy or von mises, maximumshear stress or tresca and modified mohr), which is the best to used? Please advise, thanks.

I have a drwg in Wildfire with two out of scale dimensions, I want to modified/edit them to show other number (fake it). How do you do this in Wildfire? What I used to do in previous releases do not work. thanks

Hi.I was wondering if anyone had a model for the Danfoss OMP series of motor they would be willing to share.Thanks and best regardsStephen

Upon opening a certain model-it always opens as the default rep-how canI change it to opening as the master rep or none at all? Cormac

Many thanks to all of you who replied on this topic. The answer was simple, just edit the computer name in the licencse.dat file.Thanks again!Larry Kerilaoffice line +1-408-907-8092 <- Larry is hereThis e-mail, including attachments, may include confidential and/or proprietary information, and may be used only by the person or entity to which it is addressed. If the reader of this e-mail is not the intended recipient or his or her authorized agent, the reader is hereby notified that any dissemination, distribution or copying of this e-mail is prohibited. If you have received this e-mail in error, please notify the sender by replying to this message and delete this e-mail immediately

Hello,any musicians out there? I am looking for a model of the treble clef. 2d geometry is also acceptable, in any format such as dxf, dwg etcThanks in advance.Vassilis

I have a post for my Milltronics ML14 Lathe that is almost there, but Ihave one little problem. I would like the post to put "M06 T0101" Insteadof "T0101." If any of you would be willing to share the .FIL macro forthis, or can provide me any help, I would be most appreciative.Regards,W. Matt Fegenbush

For those who are not aware of this problem. There is an issue with theproe.exe file. The information and patch can be found in TAN 127736 http://www.ptc.com/cs/tan/127736.htm<http: www.ptc.com=" cs=" tan=" 127736.htm="> . Hope this helps,Dave <http: www.ptc.com=" appserver=" cs=" software_update=" swupdate.jsp=">

Hi All,Add to the woes of not highlighting the 'open' section, Pro/E also can befustrating when we bring in Sketched entities from, Say, AutoCAD into Pro/Esketcher environment. How do I insert the sketch exactly where I want it inthe sketcher ? For example, I have a centerline that I want to align withone of the planes in the sketcher mode. Can I do it directly first time WhenI bring in the sketched entities from insert--> data from file? Right nowI need to place it somewhere in sketcher environment and then constrain thesketch which can be a pain at times.I believe many of us who work with Vendors get their dwgs from AutoCADwhich we then model into Pro/E. It would be nice if any of you if couldgive some guidelines on the best ways to handle inserted sketched entities.I am always confounded with whole screen becoming a spaghetti of White/graydimensions and constraints that takes eons to sort out (even after I bringin the entities piece by piece) :-).Thanks all in advance,Jaya

Hello all Does anybody know if we can change the pencil shape cursor to an arrowshaped cursor while manually creating dimensions in WF 2.0Thanks

I suppose most people won't get this link.<<http: fun.diadiktyo.net=" stream59=" video=" dukesofholland.wmv=">>Thanks,1st

I'm looking for the patch for Wildfire2 m070. Does anyone know where itis located? ThanksDave

Malagi, Jayateertha (GE Consumer & Industrial, consultant) would like torecall the message, "removing component from A simplified Rep".

Thanks for all the replies. Looks as though XP Prof will work out fine fromwhat everyone has reported. Some actually felt it was better than 2000Prof. due to the security enhancements in XP Prof SP2. I guess I may haveto try using it. One thing, someone did caution about using XP Home editionwith ProE. Allen LockhartMechanical Development Engineer(724) 439-7838(724) 439-7861 (fax)