Archive Read Only

What does the TBD mean next to red, green, and yellow regen status lights ? (see attached jpg)

This is in my flat state simp rep or in any combination state for that matter. Any ideas on what may be the issue? They show up as suppressed in the detail tree. Creo Parametric 2.0 M120.

I need to work on one of my models urgently!So Please!

PTC should restart it support for Linux for Creo.

sir , my name is kashyap and I am getting problem while entering the code in it ... the box where I supposed to enter the code is not working . and the curser on the box is totally fail to work on in the box.

Short question:Is there any way to make Creo run a mapkey when opening a file?

I have created a channel using boundary blend command. For this purpose I used two longitudinal curves and seven sections as shown bellow. The starting section is circle and the last one is almost rectangular.When I use boundary blend command to create channel, lots of lines were appeared on the quilt( see figure bellow). Does anyone know how I can remove them?

OK, I'm using this thing a lot today.Does anyone know if it is possible to get the area of a Cross Section fromPro/E?Thanks,Erik Olsen

Hallo zusammen,in der neuen Forumsumgebung tue ich mich erstaunlich schwer.a) finde ich den Zugang zum deutsche Forum sehr kompliziertb) finde ich keinen Schalter eine Antwort als "richtig" bzw. "hilfreich" zu markierenc) finde ich den Zugang zu den Katalogen nicht, in der Teilnehmer ihre Erzeugnisse präsentieren.Ich glaube umständlicher ging es wohl kaum oder?Gruß Werner

Hallo zusammen,im augenblick habe ich irgendwie ein Brett vr dem Kopf.Selbst die beigelegte Onlinehilfe gibt mir keinen Aufschluß.Ich habe mehrere 3D-Kurven (Geraden und Bögen), die ich zu einer Flächeformen möchte.Ich schaffe es nicht eine Verbindungslinie zwischen den auf verschiedenen Ebenenliegenden 3D-Kurven aufzubauen, geschweige eine Fläche zu erzeugen.Ich bevorzuge Express 4.0, kann aber auch mit Express 6.0 arbeiten.Zum Verständniß lege ich 2 Bilddateien und die Expressdatei bei.Mit Gruß Werner

Damián CastilloCAD & Administration ManagerEngineering DepartmentHensley Industries, Inc.

Anyone using peck tables? If so would you be willing to share and example?Thanks in advance.

I am working on a lathe post for the first time in a while. Our lathe offset command needs to be 6 digits, tool nose radius, tool number, offset number like T010101. Is there a FIL command to make the 4 digit number repeat 2 more digits like the previous 2?

​Does anyone remember changing their splash screens if so how do you do it now, am on Creo 3.

Dear Experts, May I know how we can call a custom symbol (*.sym) on sketch mode ? Kindly guide me. Thanks in advance!Hari---------------------------------------------------------------------------------------------------------------“Share your knowledge. It is a way to achieve immortality.” - Dalai Lama.

Hi All,Is there a Software Development Kit for Creo?If it is so where can i find it?

when i went in to sketch to make a roll cage around an engine. the solid model disappeared and i see tons on lines and what looks like the engine in a "outline" mode. i also have this problem when i am trying to mate things when assembling. please help me out

I have created a separate sketch (File - New - Sketch) and I would like to change the units of measure. I go to File - Prepare - Model Properties, but the Model properties option is grayed out. How can I change the units of measure in sketch

I need to get the path in the save as dialog box . I was able to get the model name. But cant able to get the file save as path.

I have created a simple rotating disc and a small mass (a block) and I want to sit the small mass on top of the rotating disc and apply friction, so that when the disc reaches a ceratin angular velocity the mass will slide off .How do I constrain the two together so that the block is almost free and that only the friction between the two components holds them together?Thanks.

I am facing the below issue while splitting work piece in Creo parametric.Can anyone help me to resolve this issue.

How do you import a sketch (a sec file) into creo parametric 2.0.

Student möchte Studentenversion runterladen, bekommt jedoch keine E-Mail mit Lizenzkey. Woran könnte es liegen??Er hat mit folgenden Mail probiert:mstroehle89@googlemail.commstroehle1193954@aol.comverena_spindler@web.de

Can we Import Material Properties from Excel Sheet to Creo Library?Message was edited by: Sajjan Kumar Gupta

what is the benefit of the introduction of taper option in extrude?when there is a full fledged separate draft option.too many same time of options create a lot of confusion like in ...solidworks...there are three known option to select sketch..either through the main tool bar,or right click or by pressing "S".this over simplification is not necessary.