Augmented Reality

Hi, In thingworx studio,I can publish projects,but I think view those with thingworx view is too complex .Is there any way to publish a project as a single APP?

I have imported an assembly that I previously "stepped" out as a step file. In Thingworx studio I have no colors on the imported surfaces. Is there a setting I am missing somewhere or an additional step I am not working through?

Hello,Is there a way to attach an ionic popover to a label in a hololens experience?  I've watched the tutorial for creating ionic popovers: https://learningexchange.ptc.com/tutorial/5107/using-popups-js .  However, this tutorial involves tying the popover to a click event on a 2D button.  I've tried to mimic the steps but I've tied the JS to the double click application event instead of a button click.  Unfortunately, while the system confirmed it was playing my sequence, I saw no visual.  Additionally, I tried to execute this event by voice command, and again I received confirmation that it was playing my event, but there was no visual on the hololens.  Any advice?  Has anyone successfully used an ionic popup or popover in a hololens experience?

Hi,I am trying to have two toggle buttons that can unpress each other in Thingworx Studio. So basically if I press one of the buttons, the other should appear unpressed.I tried binding the pressed property of one to the unpressed property of the ither, but they are not unpressing each other.Binding the pressed property to pressed property worked though.Anyone solve this issue?Thanks,Rami

[localhost-startStop-1] org.apache.catalina.startup.HostConfig.deployWAR Deploying web application archive C:\Program Files\Apache Software Foundation\Tomcat 8.0\webapps\Thingworx.war[localhost-startStop-1] org.apache.jasper.servlet.TldScanner.scanJars At least one JAR was scanned for TLDs yet contained no TLDs. Enable debug logging for this logger for a complete list of JARs that were scanned but no TLDs were found in them. Skipping unneeded JARs during scanning can improve startup time and JSP compilation time.

After having me logged in to the Thingworx Studio Portal and having installed the ThingWorx Studio propperly the Autoconfiguration of the ThingWorx Studio did not succeed. The manual setup also failed, because I have not received any Welcome to the Trail E-Mail with all my personized information. Any Ideas where to get the personalized settings from?    

Hi all,Can anyone tell me how to create a specification page in the thingworx studio? In the KTM bike demo, there is a button called "i" will give you the specifications of the bikeCan anyone help in implementing this kind of page, please.

Hello,   I'm a new user and I'm facing some problems in an application for HoloLens   - I published a model and when HoloLens loads it, it doesn't show anything   - How can I implement a experience with voice command?   Thanks

Hello,I uploaded a .asm file on ThingWorx Studio and it was "converted" to .pvz but when I attach it in a 3D Model it simply don't show on screen. It's like an "invisible" modelDoes anyone knows what is happening?

Hello,I can't install the Studio on the Windows 7 Pro 64bit. Gives me error everytime I try. See attachment for the log.Could somebody help please?In the log I see that installer detect system as Win 32. Is this an issue? How to work around it?

Auto configure failed. I have tried in my company network,public network. Even I changed different account. WHY????

thingworx studio option touch screen

Hi All,I'm helping someone with getting Studio up and running on a Mac and they are getting the issue described in these posts (here and here) where you just getting the spinning hexagon and nothing happens:Looking through the log file, it appears that the projects are missing the gulp.js module as shown:11/9/17, 9:24:10 am AEST] info: [twx-studio:projectHelper] Creating ves-ar-extension app: Welcome[11/9/17, 9:24:10 am AEST] Error Initializing { Error: Cannot find module 'gulp'    at Function.Module._resolveFilename (module.js:469:15)    at Function.Module._load (module.js:417:25)    at Module.require (module.js:497:17)    at require (internal/module.js:20:19)    at Object.<anonymous> (/Users/tosin/Documents/ThingWorxStudio/Projects/Welcome/gulp-shared.js:7:12)    at Module._compile (module.js:570:32)    at Object.Module._extensions..js (module.js:579:10)    at

Hello,Everyone     I am a beginner, I want to connect Thingworx Studio 8.0.3 to the Thingworx composer 8.0.3 what should I do?Where are the tutorials?Thanks

Hi,I've signed up for Thingworx Studio Trial version to develop an AR proof of concept. However, I could only login outside my company's network. When I try to login from my corporate network, I get the following log:[08/28/2017 12:00:31] Studio Version 8.0.3 (8.0.3.1898)[08/28/2017 12:00:31] Status Message: Version 8.0.3 (8.0.3.1898)[08/28/2017 12:00:31] Checking for updates from https://studio-download.vuforia.io/downloads/ThingworxMobileBuilderApp.application[08/28/2017 12:00:33] Status Message: Performing First Time Setup (Application)...[08/28/2017 12:00:33] Unzipping mbdist.zip to C:\Users\NTUser\AppData\Roaming\ThingworxStudio\studio-download.vuforia.io\[08/28/2017 12:00:35] Status Message: Performing First Time Setup (Libraries)...[08/28/2017 12:00:35] Unzipping mbmodules.zip to C:\Users\NTUser\AppData\Roaming\ThingworxStudio\studio-download.vuforia.io\[08/28/2017 12:01:18] Starting node.exe[08/28/2017 12:01:20] info: [twx-studio:initializer] Node version: 6.10.0[08/28/2017 12:

Hello all,I would like to show and hide a part (in a model) when I click on a checkbox, how to do that ?And I have the same question as before, but I was unanswered, how to play only a step in an illustrate animation ?Thanks !

I'm a beginner. How can I connect Thingworx Studio and Kepware 6 seamlessly to Thingworx composer,Thanks

Check out the new features added to ThingWorx Studio 8.0.3 below.ThingWorx StudioAdded additional supported CSS properties for the 3D Label widget, including borders and underlineSupport for state-based formatting of the 3D Label widgetBug fixes and minor improvementsThingWorx View​Highlight feature for new Gallery ExperiencesOnly iOS 10 or later will be supported after the release of iOS11HoloLens:Support for multiple view in an ExperienceSupport for authenticated ExperiencesBy default, the ​Access​ setting under CONFIGURATION > Info ​is set to ​Requires Authentication ​when a new Eyewear project is createdBug fixes and minor improvements

Hey all,I have rebuild the Blue Pump Demo for the Hololens and with gestures and voice commands.Everythings is working fine instead of the "live" data coming from ThingWorx.I am using a Thing that is generating random data on his properties. I use the external data panel in Studio to bind the properties to 3D gauges and 3D Labels in the Hololens experience. In the Composer and in the experience preview i see that data is changing but on the Hololens I see no data.Has anybody the same issue?Seb

Good morning!Does anybody had the problem before:When I am working in ThingWorx Studio the Save-symbol does not disappear. It does not finish saving.That is why I can not work on my Experiences or publish them.Hopefully, somebody can help me with this problem.Best wishes,Stefan

Hello,I need to open a 3D Model .dwg in ThingWorx Studio as a model. Any suggestions?Thx

ASUS N76VBWindows 7 Ultimate x64Memory = 8GB DDR3NvideoGeForce 740I download setup.exe from https://studio.thingworx.com/home/I cannot install this application on my ASUS with the following reports:[09/03/2017 02:45:34] Studio Version 8.0.3 (8.0.3.1898)[09/03/2017 02:45:34] Status Message: Version 8.0.3 (8.0.3.1898)[09/03/2017 02:45:34] Checking for updates from https://studio-download.vuforia.io/downloads/ThingworxMobileBuilderApp.application[09/03/2017 02:45:35] Starting node.exe[09/03/2017 02:45:37] module.js:471[09/03/2017 02:45:37]     throw err;[09/03/2017 02:45:37]     ^[09/03/2017 02:45:37] [09/03/2017 02:45:37] Error: Cannot find module 'debug'[09/03/2017 02:45:37]     at Function.Module._resolveFilename (module.js:469:15)[09/03/2017 02:45:37]     at Function.Module._load (module.js:417:25)[09/03/2017 02:45:37]     at Module.require (module.js:497:17)[09/03/2017 02:45:37] &

I Have a problem with an execution of service with JS.I maked a simple service to write 5 value into DATATABLE in the Thinworx Composer.IN THINGWORX STUDIO i make this function into Home.js$scope.save=function() {$scope.app.mdl['BEER_DRINKTEC_2017'].svc['putData'];};If I use the button event linked to the service, this works well and runs.if i recall a function save();or use directly  $scope.app.mdl['BEER_DRINKTEC_2017'].svc['putData'];   into antoher function , the service not running.THNXGiuseppe

Hello ,            I am new to thingworx studio and vuforia studio ,and i have small doubt for the exact difference between the thingworx studio and vuforia studio . According to my knowldege vuforia studio was renamed as thingworx studio ,but could not find it in any off the documents or blogs on thingworx studio and can anyoen provide a documentation for the same or could correct me of I am wrong and give me the right information   Kind Regards , Amar.

Hello,I am in the pilot program, using it on Ipad & Android.... nice.But i have a Microsoft Hololens, and using this to view my Creo Parametric models.Now with Creo 4 & ThingWorx Studio, when is Thingworx View available for Hololens??