CAD

Please advise how to get rid of the little green box around letters and symbols in worksheet and make them not printable.it's annoying me. Thanks, Ruoshi 

I'm excited to announce the publication of my book to help explain the many confusing files that are ModelCHECK! Of course most of the members of this group may be beyond needing an introduction to ModelCHECK but if you know someone who does need help...Re-Use Your CAD: The ModelCHECK Handbook was published in conjunction with Action Engineering and is available for purchase at Createspace and Amazon. You can also browse through a copy at LiveWorx 2016 in Boston. Look for it and me at the Software Factory booth in the Expo Hall.

I am using Creo Parametric Release N/A and DatecodeN/AI need to know which version of Creo created a step file with 'Creo Parametric by PTC Inc, 2021304' in it. What version of Creo is 2021304?

Hi, I use creo parametric 2.0. I have problem and questions. IF it possible in creo 2.0 make a part and after split have 2 separate part? I know I'm backing up and cutting etc but I'm looking for a creo function that would allow me to do this without backing up.

When I turn on a cross-section, some solid models appear as surface models. They appear as 'hollow'. Nevertheless, 'Show Clipped Model as Solid' is checked on in 'Options', and 'Capped_clip' in config.pro is set to 'yes'....Any suggestions as to what could be wrong? ( Creo 4.0 )   Kind regards    

I am using Creo Parametric Release 4.0 and DatecodeM150I have an assembly that contains parts PRT1 and PRT2. I made a parameter KOS that allows me to choose which part is active in the assembly using IF statement in pro/program.In the assembly i also have a coordinate system, that I would like to place on default coordinate system of whatever part is "active".I tried adding the add feature of csys inside IF statement which supresses/unsupresses either part (and changed references to the appropriate csys of part), but it returns an error that feature with that ID already exists.Is it possible to change references for a coordinate system inside pro/program? Is it possible to use IF statement inside the add feature of csys where it requests references?(pro/program in attachment)

Hello If I have an assembly pattern with a bunch of parts, and would like to remove the pattern but still have all the parts left in their places, can I do that somehow? The reason I'm asking is that now that pattern is populated by the same part, but I want to make it into a family table part with features that vary depending on location. If I do a Replace on some part they all change. I do understand that I can convert the pattern into a Table pattern and swap the instances there, but that does not save much work in this case, so I would prefer to just "de-pattern" the pattern into single parts.

Hi, Can you suggest api to change component in assembly to user defined representation. Thanks in advance.

 

I am studying Mechanical Engineering and downloded mathcad educational.do you have a version of Mathcad that is free for Students?thank you for the informationkind regardsThomas

There is no mirror feature command

There issue that license is already expired when I install Mathcad first time for test 30-days period.

Any chance that a native Mac OS version of CREO View is in the PTC roadmap?   

Hello Community, I have edited several PVZ files in Creo View MCAD, and added further assemblies, also from PVZ files, via "Add Viewable to Session". This has worked perfectly for months. Now, however, the added viewables have suddenly disappeared from the corresponding PVZ files that they were added to ("parent files"). However, the added assemblies are still visible in the thumbnails of various annotation sets of the respective parent files. Based on the previous experience and on this help text, I assume that viewables that have been added in this way are stored inside the parent file, so that the location of the added assembly does not matter after it has been added (as would be the case, for example, with Microsoft OLE Object Linking and Embedding).The shared location of the parent file and the added viewable has changed in the meantime, but both are still in the same file folder together. What could be the reason that the added viewables are suddenly no l

As per this thread - same issue   Thanks very much and sorry for the late reply.   Is there any way to also hide the labels about version, filename etc.?  

I am using Creo Parametric Release 6.0 and Datecode6.0.2.0After installing Windows 10 21H2 update to build 19044.2006 anytime Creo (Parametric or Simulate) is started an error "No write access to C:\Users\Public\Documents" is displayed. Directory permissions are ok and user can manually create folder sand write files to that directory. Able to proceed when browsing to and selecting C:\Users\Public\Documents.Also now when trying to create a part with the default template New File Options are required, was never required before.Uninstall and re-install of Creo does not fix the issue.Here are the errors that I facedNo write access to C:\Users\Public\Documents

I am using Creo Parametric Release 6.0 and Datecode6.0.1.0The link to the Training Documentation on this PTC Website is not working

I am using Creo Parametric Release 4.0 and DatecodeM150GPU RENDERING DOSENT SUPPORT PROPERLY WHILE RENDERING. WHILE RENDERING, UTILIZATION OF GPU IS @ 0% ONLY.

Using Creo 7.0.5.0 I have a situation where I'm making a rectangular base plate for a table-stand. The plate has 2 mm chamfered edges and the 8 corners should be chamfered as well (see image below). However, this requires not less than 8 separate features which are tiresome to create. Not only that - the dimensions are not remembered between each corner, they can't be mirrored or patterned either. Not even if an existing Corner Chamfer feature is copied and pasted to another corner the dimensions are kept (so what the point of copying it?).  Anyone who has a simple solution to this?  

 Could someone explain, please, how possible to build two or more curves at one graph (plot) in MathCAD Prime? "This variable is undefined. Check that the label is set correctly." the error message is shown.

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0i updated Creo parametric to 9.0.2 and i found an issue that my collegue with version 8.0 and 7.0 are not able to open the assembly

I can not use mathcad for 30 days

Nx has centering options with two faces of fixing and two faces of centering(moving) faces. So it is very simple to center a body between two other body

So I have marked up a model with annotations and notes.  The engineering has recently updated from rev A to Rev B.   Is there a way for Creo View to update the engineering while still keeping the annotations and groups of the previous version. Or is there a compare function I could do that would compare part numbers vs the location and have another PVZ of the changes B had to tack on to Rev A? Thanks,

I have installed Mathcad Prime 8.0.0.0. So before buying it I wanted to try it. But when I try to assign value to some variable, for instance when I write x := 5 it instantly crashes, giving this error:An unhandled exception occurred on the dispatcher thread.and then it directs me to logs. Logs are too long to include here and I have no idea what's causing it. As you can seeI will not buy the product unless this issue is solved. I appreciate your help.