Creo+ and Creo Parametric

Can someone please help me to define the tensile strength and yield point in creo? I've already tried it in the attachment, maybe someone here knows more about it and can help me...   Goggle translate by Community Moderation.      kann mir bitte jemand dabei helfen die Zugfestigkeit und Streckgrenze in Creo zu definieren ? im Anhang  habe ich schon es probiert vielleicht weißt hier jemand  mehr darüber und kann mir dabei unterstützen...   Vielen dank:)    

How do I measure distance tangential distance between these two surfaces? I am trying to do this in STEP assmebly.   

Hi all, As the subject suggests, I have a problem with the explode lines being hidden in drawing view. They can be seen as offset lines in the assembly. The only layer hidden in the drawing is 03___PRT_ALL_CURVES. When I try showing this, the hidden lines still do not show up.  Any help with this would be much appreciate. Thank you!    

I need a support to get some information on Creo pro-programing as I'm working on this topic for one of the projects to change the model according to new design specification up on regeneration which will run by the program. As of now, I have made the program using parameter relations which will create the required models based on the parameter's entry as per the design specifications and it is working well.   The program is written in such a way that it will pop up the error message window if we enter wrong or incorrect values as inputs but after that it will ask for to continue regeneration or abort the changes as in the attached snap. If we give yes to continue regeneration, still program could be able to create model with incorrect parameter values. But can we restrict this regeneration or set user defined error message saying that the entered values are incorrect please try to enter correct input values blah blah ……?

I am using Creo Parametric Release N/A and DatecodeN/AHello,can you help me to change .CRC files location path?I know TRAIL files and else can change the location.I try to find the option command. But I can't.I will look forward to your response.

One of our engineers has placed many views outside the drawing borders to pull detail and section views from. I am saying it is a bad drafting practice but he insists he has valid reasons to do so, I would like to hear the opinion of others who do large drawings. This is a plant layout design and has about 10 sheets to the file.

Whenever I drag a handle for a 3D feature (extrude, revolve, etc.) it snaps to some fixed increments, rather than allowing me to smoothly and continuously drag it. Surely there is an option to disable this snapping, right? The only workaround I've found is to set the interval values to very small numbers, but surely there is an "OFF" switch for this snapping behavior, right? Workaround: https://community.ptc.com/t5/3D-Part-Assembly-Design/draging-extrusion-only-allow-0-100-increments/m-p/226354  

Hello,I've been trying to figure out a way to calculate the average/total flow velocity in a given section of the model. However, there are no such option in Flow Analysis. What I mean can be understood with the example below.  Is there a way to find out the average/ total velocity (m/s) of a local section (highlighted in red). Or is there a way to find out the average/total velocity (m/s) through the entire model.I can't seem to find any such option. The real time probe option gives values of the variable at just single points.Can someone please help me through this ?  

do you know how i can define the material definition in CREO (tensile Strenght) ? thanks   

Hello, this is Minkyu Hwang from IDT.   I have a few questions. 1. If you run creo, it will run in about 3 minutes. 2. Unable to access Creo internal browser.   I want to ask if there is any solution for these two problems.   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- 안녕하세요 IDT 황민규입니다. 몇 가지 질문이 있습니다.  1. creo를 실행하면 3분정도면 실행됩니다. 2. Creo 내부 브라우저에 액세스할 수 없습니다.   이 두 가지 문제에 대한 해결책이 있는지 묻고 싶습니다.

how to set decimal places 2 for 3d and 1 for 2d in creo     

Hello dear members, trying to import file from following link in Creo, but its not importing properly, could anyone suggest the correct procedure to import? I tried importing but results are not satisfactory (see image below) https://www.mcmaster.com/4003K71-4003K727/  

This is driving me crazy because sometimes, when I play with reselecting edges, the leader moves to where I need it, but for the most part I have to create a note and call out the dimension in question (workaround I would like to avoid) 

I have a 1 line BOM for a part and updating tables command or going from tab to tab blanks all the info out of it. I can re-add the table or right click and look at the properties to remind it they exist. The info shows up on the assembly BOM fine.Does anyone have any ideas? I may remake the part to get rid of this annoyance. This is the first time I've run into this 

The bore cycle in Creo Parametric 2.0 only seems to generate CYCLE / BORE which is G85. We need to bore, orient, back-off, and retract with G76. orient_angle and jog_dist doesn't output. Any way other than an Auxiliary Sequence all with CL STATEMENTS?

when we are going to export the drawing into the pdf the line weightage is increased. we are unable to find where I can reduce the weightage of that line. is there any setting in Creo where I can reduce the thickness of the line or weights. So' help us to out us from this issue.    

Hello, [Creo Parametric 9.0.3.0] Normally when I open a Assembly file I've to pick one of my representations before and that's ok but when doing a drawing file I've never picked a representation at the beginning because I've multiple of them display in the different slides.It never happened to me before that I had to pick a representation before opening a drawing file.  [Picture 1] Now I've been working in a drawing file with multiple slides and multiple representations, with the same assembly model for all of them. If I select a representation when opening it, some views in my drawing slides are changing too. [Picture 2] I correct it by going to each view again, and select the correct simplified representation as in the latest versions. But I don't want this to happen again. [Picture 3][Picture 4] Why is this happening? Does someone experience something similar?              &

Creo7 When using the IFX fastener dowel pin counter bore option it only allows you to put a through hole in smaller than the dowel pin. I would like to flip the counter bore around so the counter bore is larger than the dowel .Example: On a 1" thick plate Ø.2497-.2500 thru, C'bore Ø.281 x.5 deep. This way the press fit isn't through the whole thickness of the plate. 

In Creo Parametric, we know that there are 2 kinds of text in 2D sketch, one is to add text manually, and another one is to add it by parameter of the related model, and I want to know if we have some function or interface in pro/toolkit to access the text to change the parameter relations as the picture showed. Currently I couldn't find any similar function. I need the help....Thanks a lot! Bob 

Hi,As you see in the attachments, the thickness of the arrow line is so lean when export to pdf. How to increase that arrow line thickness? I tried using print to PDF but the result is same. I need the arrow lines to be at least 70% thick as same as the drawing line. or need to reduce the line thickness same as arrow line thickness. Please refer the image 2.

I'm trying to represent a tubular diagonal brace, and the pins that attach the brace to a structure, using beams. The pin beams have two segments so I have a node at the center to attach the diagonal brace to. The ends of each pin have a fixed joint connecting them to the holes in the ears (pictured in the first attachment).  The diagonal brace has spherical joints on each end so I have a beam release on one end allowing all three rotations. The other end has the Y and Z rotations released but the X rotation remains fixed to prevent  the beam from spinning about it's own axis. The trouble comes when I generate the solid mesh. When I have all of the attachment pins in the model, Creo Ansys will generate the solid mesh with no problem. As soon as I put a diagonal brace into the model, the meshing process fails, sometimes with a fatal error. Creo Ansys doesn't give any diagnostics, so I have no idea what the issue is or how to resolve it. Do I need joints between the ends o

Hello I am new to Creo and I am going thru the tutorials and during the Sheet Metal Sketch Form tutorial it shows the Add Taper check box, however in my Options box in Creo 8.0 that isn't there.  Is there an option somewhere to turn this on so it shows up?  Earlier in the Fundamentals I had the same problem where the Add Taper box wasn't missing as well.   

Vacuum pressure is applied into the center of the chamber as shown. This pressure can distort the circle. A fixed constraint will anchor the square plate. (12 locations in total) Q) How do I give a fixed constraint? (You have to consider that the circle can be distorted.) The Creo version I use is 7.0. Creo super master please help  

I know how to change them to scientific format (based on ptc article https://www.ptc.com/en/support/article/CS124580). Is there anyway to change the scientific format to fixed format instead of the current years-long vote-consider-action procedure? This is a basic function needed in result presentation. Why bother end users to vote for ptc to take actions to add this basic unction? End users will not be bothered to vote instead of voting on using competitors' FEA software tools. Why ANSYS has this basic function but Simulate needs people's vote to have this basic function?

I am trying to idealize the bolted joint by advanced spring in creo simulate.  The axial stiffness can be calculated Kxx=EA/L Anyone could please tell aboult calculating the stiffness of bolt in Kyy and Kzz direction