Creo Modeling Questions

Hi.I want to make a hole that is angled 45 degress in a mould opening vertically. I have tried to sketch below how I imagine the mould parts to look like.When doing a draft analysis it looks almost fine. I just need to get rid of the "rainbow" area in the middle and have a "clean cut" going from blue to pink with no transisition.Any good ideas on how to do that?

I've been running the Single User Performance Tester with Creo Parametric 2.0. I've run the following operations: Register, CreateWS, Download, VerifyFamilyTable, UndoCheckout, Remove, Delete, and Unregister. The output file contains the time each operation started and ended and whether it was a success or a failure. I'm looking for a parser to read the output file and tell the exact amount of time each operation took, as well as whether it was a success or a failure. Could someone point me in the right direction?Thanks,Noora

I have data from a client that a different outside vendor did for them in WF5 but they are still on WF4.  I know about the CGRI plugin, but is there any easy way to get the features from the WF5 model into a blank WF4 model.  At one time I thought that there was a technique using a UDF that would allow it to be brought into an older version, but I’m not sure if that still works. I’m fairly sure that I’m out of luck, but thought I’d throw a Hail Mary pass.

Hi guys. I downloaded the student version of Creo 2.0. Somehow I can't click on the field to enter the product code. Would really appreciate it if anyone can help me. I have an assignment due next week.

Hallo Community,Ich habe seit einiger Zeit ein Problem beim Starten von "Creo Parametric 2.0" (Studenten Version).Jedes Mal bekomme ich die Fehlermeldung "prod_dcu.exe funktioniert nicht mehr" und wird danach beendet.Eine Neuinstallation hat leider auch nicht weiter geholfen Hat jeman eine Idee woher der Fehler stammt, und/oder wie ich diesen beheben kann?Vielen Dank im Vorraus!Hier ein Bild der Fehlermeldung:

I've been looking at the 3DConnexion range recently. It comes down to the SpaceNavigator or the SpaceMouse Pro. The SpaceMouse is marketed as the more ergonomic product because it has a wrist support.I know enough about wrists to know that products which put your wrist flat on the table aren't very ergonomic. I am lead to believe that the cheaper SpaceNavigator would be the superior product since it looks like it could be used with a vertical wrist position.If anyone uses ergonomic HID devices and has used 3DConnexion products, please could you share your experience? Thank you

Draw the circle and use "replace" to substitute the arc for the circle. Under Edit.

Hi, Someone on this list have sent me a very interresting file form PlanetPtclive from David Haig (2012). I've printed just some page.Now I can't find the file. Can someone could tell me where I could find it, please ? Thanks,GB

any buddy let me know what's new or update in Creo 2.0 M050?Kind regards,

Anyone else have issues loading the CREO 2.0 demo? I've tried to load this a few times with no luck. I'm running XP stillbut I think that is ok. T

Hi,Since I'm working on Creo2, I get a window that tell me that mass propertieswill not be calculated each time I save anything. I was before on Wildfire5 and didn't get this. Anybody knows what's the problem ? Thanks,

wow..there is no "equal to" constrain in CATIA sketcher..... lets appreciate proe for all that is has for so long...

Hello everyone, wanted to share this information here as well:If you can't attend PTC Live Global this year, we are bringing some of the action to you. Starting this Sunday June 9th, the PTC Live Global Group here in the Community will host the PTC Live Global Social Hub where we'll share photos, social media conversations, blogs and on demand keynote recordings.More details:http://communities.ptc.com/message/206600~Heidii

How do we model NPT holes in Parametric 2.0?Is there a text file that we need to add?Thanks,H. Bostanci

Hi,I am using WF3. Want to merge two or more dxf files into one programatically or using command line ? Has anyone done this or knows about it ?RegardsAwadhesh

Is there a way to quickly compare two models, the old revision vs. the new revision? Highlight changed faces or some other indication of a change?Thanks,Jason

just came to know catia does not have a text option in sketcher.and pro/e has it for so loong...we use this text option regularly for a our work...th reason i am posting this is....we keep on saying pro/e takes so many clicks..and this is so bad in pro/e.... and this can be done so easily in solidworks,inventor.....and so on...well lets appreciate some wonderful things in pro/e!

When the NC check is finished playing in Creo 2.0 my screen always goes back to the pre-NC check state. In WF5.0 the NC check would allow you to view the material removed until you move the screen view and then it would disappear. Is there a setting somewhere that I don't have set correctly or is this just the way it is now with 2.0?Thanks,Matt

I want to make a cylinder, and it has a hollow inner spiral. I can make a hollow inner spiral,but how can I make it inserted in a cylinder.The picture shows a object, but it doesn't satisfy my requirement.I need a hollow inner spiral.I'm a beginner to Pro/e, but I have limited time to finish thsi object. So can someone help me? Thanks in advance.

Are there any file syntax restrictions in Creo2?Are there any File lenght restrictions in Creo2Are there any file depth restrictions in Creo2? In other words can you put files many layers deep or is that a problem?

This worked.I had it backwards.Thanks a bunch.Carl

Things that make you roll your eyes.

Does anyone out there in CAD Administrator land consistently have to record metricsto give management an overview of your daily, weekly, and monthly activities?Is there third party software that can be utilized?charles.graham@stryker.com

abdellah%20irhouza137