Kepware

I have created simulation channel and started logging in the SQL using DSN.However, the logging interval condition is 1 minutes. TImestamp is used for System.I facing issue that ms timestamp is increasing sometimes, and after few hours it will increase in 1 sec.  How to keep second data constant.

I am completely inexperienced in using KEPServerEX. I am already download KEPServerEX 6 demo version. Our company is currently implementing a project that will deploy the use of KEPware. I want to ask whether I need a license to use during the product development phase or not. If I want to use a driver that is not available in KEPWare's library, what do I need to do? Thanks a lot.

Hello Team, We are having Two Kepware for tunneling OPC DA to UA. First Kepware is installed Locally with OPC DA server in source, Second one is in L2 system to connect first Kepware as OPC UA client. Issue is whenever OPC DA server or OPC UA server got disconnected  from source with L2 Kepware, it's Quick Client hold the last good Value with quality Bad. As soon we open new QC it shows unknown value. Can you please explain me about this phenomenal?  If you do any have whitepaper please share with us. Due to this above issue, MES captured the last hold  bad Values from L2. 

Hello, We have a machine connected to KEPServerEX via OPC UA.We have a challenge in seeing the machine events through Kepware while we can see these data in an alternative OPC.How can we do to be able to see the machine events in Kepware? Thanks

Hello,I am new to Kepserver. Unfortunately, I switched the runtime from Service to Interactive mode in KepserverEx. Now I have changed it back to Service mode, but the DCOM settings are gone and I can't see the tags in Quick Client. However, the connection between Kepserver and Thingworx seems to be good, as I can see the realtime values in Thingworx.Experts, please help me solve this issue.Thanks,Sk

Hi all, I have been familiarizing myself with the Kepware Configuration API, specifically creating and accessing tags from thingworx using the API. I have been able to create normal tags using the API, however, I am struggling to find out what the endpoint URL should be for advanced tags.  I use the endpoint in the following format to get all the channels: /config/v1/project/channels This endpoint gets me all of the channels in my Kepware environment, but I can't find where the _AdvancedTags channel is for accessing the advanced tags and creating new ones. If anyone has been able to access the _AdvancedTags through the API please let me know. Any feedback is greatly appreciated thanks!

Hi,I need to monitor a certain tag, specifically I am monitoring a tag that records a temperature.I would need to set a boolean tag to 1 when a certain temperature threshold is exceeded. When the problem returns, I would need to reset the boolean tag to 0. How can I set this condition with Kepware?

hello,  i'm a new user of thingworx plateform. I have ,no data on one of the machines so i checked the connection kepserver/client and there is this error : Channel failed to connect. | Status description = 'Could not establish a network connection to remote server.', Status code = 0X80AC0000. Any ideas why this is happening and how to solve it ?  Many thanks 

Hello,   Due to security reasons i would like to create the schema architecture as it is depicted to the attachment file.Is it possible to have a kepware server to my our IT network and get data from another one from OT Network?If yes , could you please give some guidelines about that?       Thank you,

Is it possible to create a Modbus TCP/IP slave using Kepserver v5.19 with Modbus TCP features? I've created a new channel and a new device with the IP address as the computer I am using and with Modbus address 1. I then tested using a Modpoll software on the same computer and I was able to get data from the Kepserver. But when I tested a different computer to poll the modbus addresses, I cant establish a connection. Is there something missing in my setup?

Hi We are trying to connect new PLCs to a kepware server. The PLCs are Omron CP1L and CJ2M models. We already had one CJ2M PLC connected to ignition and it is already working, but it's the only one working. Wen we try to connect them directly to Ignition it works and we can read tags. On ignition we are using the default values for the nodes. Why would it not work on kepware? Sometimes one of the test PLC we were adding to Kepware worked but it caused the already working CJ2M PLC to stop working. So it seems we can only connect one Omron PLC at all time on kepware. I saw a documentation that talked about multihoming on the host server, would that be worth a shot or is there something I'm missing? Note that all PLC are on a separate IP address and channel on Kepware. Also, Ignition and Kepware are running on the same server.  

I would like to show on the dashboard that how many devices are connected and out of those devices how many are communicating over KEPServerEX 6.9.

Hi Team,We are using kepware V 5.14 and ODBC driver and receiving the error.Error - "Unable to connect to data source on channel__,Device"--" (reason: 'Memory allocation failure').

i need to log data that trying to send to stored procedure that may case of issue 

Getting the error while activating my licence , any one have any idea ? Please help ?  Before upgrade have transferred my licence back to kepware, i can see my licence are stage there. but the same failing to active post upgrade.  Thanks in advance. 

Hello Team, We want to synchronize two Kepware project Automatically for Redundancy purpose, In PTC Knowledgse base we have checked the  Article CS353352 (https://www.ptc.com/en/support/article/CS353352) Where they have mentioend this below line. Workaround: use a batch script to copy the .opf from one system to another, and then through the Config API call the endpoint to replace the projectFor that Your help require if nay sample or example or any reference link is available how to make Batch file for Kepware *.opf file?  As I know this active Backup file run on System Program data Folder. So how we can achieve this requirement?  Best Regards,Bhadresh Rangi

what kepserver version should i use for windows 7?, i tried to install kepserver 6.15but it say doesn't support

Hi, how can i fix this on Kepserver  one or more features are time limited  i tried to restart, stop reset service and remove everything and make new device and connection again but still have same problem i use free version and i have used before, some months ago and i had not any problem how can i fix it thanks in advance      

The Screenshot is from "Yabe" and here i can see the values of the childs (e.g. Device 2006 - 2). In the KepserverEX (6.9.584.0) I am only able to autgenerate the items for Device 2002, all others (childs) are not generated. Any idea  ?   

Hello  I have a local instance of Kepware (V6.9.572) on my Laptop to which I want to connect a scanner device. I have a Honeywell scanner which interfaces with my laptop using USB port. I want to connect this USB port to Kepware and obtain the scanned data as a string input. Is this possible to do? Thanks in advance  

Good Morning,I am using THINGWORX KEPWARE SERVER 6 for the first time. I need help pleaseI need to interact with a command box using the MQTT server on Kepware but I don't know how to configure or what is required to establish communication.My goal is to be sure that I can communicate with other applications using the MQTT broker on KEPWARE. THANKS.

I'd like to know if the Relion 670 series devices (Bay control REC670 and Line differential protection RED670) are compatible with Kepserverex 6 ?

Good afternoon. Trying to connect by protocol IEC 60870-5 104 Client to PLC.In event log write:3/05/2024 5:01:40 p. m. Warning IEC 60870-5-104 Client Channel1.Device1 | Device is not responding.I`m check all communications (destination host, destination port, common address) all correct.Additionally, I would like to know if it is possible to establish the qualifier of interrogation sent to the devices.

Hi,    I'm trying to make a remote connection between a OPC client to a OPC server (Kepware).   On the server side, after adding the device and channel (OPC-DA), I was able to find and import the tags from the client, but they all show that the quality is "Bad" and also have no value. On the other hand, when I add the tags directly in Kepware's tag management (OPC quick client), I can observe the tags and see that they're value is changing. I ve tried dcom configuration but i am already in same pc. In short, I have a connection with the client, I'm just unable to receive any value when I add the tags through the device connection I’ve set up in Kepware.

Good morning, I've connected a pulse counter from a volumetric meter to KepServerEX. In the Datalogger, I've set up data logging for the counter in SQL Server, and I would like to also include the average flow rate between two pulses. I'm having trouble finding solutions, do you have any ideas?