Kepware

i need to log data that trying to send to stored procedure that may case of issue 

Getting the error while activating my licence , any one have any idea ? Please help ?  Before upgrade have transferred my licence back to kepware, i can see my licence are stage there. but the same failing to active post upgrade.  Thanks in advance. 

Hello Team, We want to synchronize two Kepware project Automatically for Redundancy purpose, In PTC Knowledgse base we have checked the  Article CS353352 (https://www.ptc.com/en/support/article/CS353352) Where they have mentioend this below line. Workaround: use a batch script to copy the .opf from one system to another, and then through the Config API call the endpoint to replace the projectFor that Your help require if nay sample or example or any reference link is available how to make Batch file for Kepware *.opf file?  As I know this active Backup file run on System Program data Folder. So how we can achieve this requirement?  Best Regards,Bhadresh Rangi

what kepserver version should i use for windows 7?, i tried to install kepserver 6.15but it say doesn't support

Hi, how can i fix this on Kepserver  one or more features are time limited  i tried to restart, stop reset service and remove everything and make new device and connection again but still have same problem i use free version and i have used before, some months ago and i had not any problem how can i fix it thanks in advance      

The Screenshot is from "Yabe" and here i can see the values of the childs (e.g. Device 2006 - 2). In the KepserverEX (6.9.584.0) I am only able to autgenerate the items for Device 2002, all others (childs) are not generated. Any idea  ?   

Hello  I have a local instance of Kepware (V6.9.572) on my Laptop to which I want to connect a scanner device. I have a Honeywell scanner which interfaces with my laptop using USB port. I want to connect this USB port to Kepware and obtain the scanned data as a string input. Is this possible to do? Thanks in advance  

Good Morning,I am using THINGWORX KEPWARE SERVER 6 for the first time. I need help pleaseI need to interact with a command box using the MQTT server on Kepware but I don't know how to configure or what is required to establish communication.My goal is to be sure that I can communicate with other applications using the MQTT broker on KEPWARE. THANKS.

I'd like to know if the Relion 670 series devices (Bay control REC670 and Line differential protection RED670) are compatible with Kepserverex 6 ?

Good afternoon. Trying to connect by protocol IEC 60870-5 104 Client to PLC.In event log write:3/05/2024 5:01:40 p. m. Warning IEC 60870-5-104 Client Channel1.Device1 | Device is not responding.I`m check all communications (destination host, destination port, common address) all correct.Additionally, I would like to know if it is possible to establish the qualifier of interrogation sent to the devices.

Hi,    I'm trying to make a remote connection between a OPC client to a OPC server (Kepware).   On the server side, after adding the device and channel (OPC-DA), I was able to find and import the tags from the client, but they all show that the quality is "Bad" and also have no value. On the other hand, when I add the tags directly in Kepware's tag management (OPC quick client), I can observe the tags and see that they're value is changing. I ve tried dcom configuration but i am already in same pc. In short, I have a connection with the client, I'm just unable to receive any value when I add the tags through the device connection I’ve set up in Kepware.

Good morning, I've connected a pulse counter from a volumetric meter to KepServerEX. In the Datalogger, I've set up data logging for the counter in SQL Server, and I would like to also include the average flow rate between two pulses. I'm having trouble finding solutions, do you have any ideas?

I have 4 different sites, each one with Kepserver EX installed, is there a way or best practice to get connected all Kepserver each other? thank you

We installed KEPServerEX 6.14.263.0 on a customers VM last year and they now say it's getting flagged by their antivirus software. Not sure what they are using but wondering how often this happens and if installing the latest version will help?

I have added a number of tags to the device. But when I open the quick client, I get an Unknown value and Bad quality. This is for an Omron PLC and the addresses are like GSR_NXTC.S_READ.AS_TC[0].S_CH[0].N_PV. Also, when I click on "Launch Quick Client Here" I get 5 times as many tags as I want. I have to delete unwanted tags. But if I make a change they all come back. There are 53277 items. I only need about 30 of them. All the other stuff is un-needed. Is there another way to handle editing? It doesn't appear to be able to be done from the Quick Client. KepserverEx 6.14 

Hi, I tried alot to connect the subject PLC with serial port to kepserver, but its not responding. Though its works with FX Cpu but not with q series PLC with serial port.when i select the series and whatever it select the default setting for serial port are different from the setting in the programming software GX works-2. with by default setting its not communicating, while if i change the communication parameters as i set in the programming software, then it give error for device not responding."Date Time Level Source Event29/04/2024 22:57:16 Warning Mitsubishi Serial Channel1.Device1 | Device is not responding. | ID = '0'.". Seems like kepserver 6.6 is not support q series serial port driver. Please help me.

KEPServerEX 6.15V6.15.132.0I have multiple ODBC values that show correctly in quick client but the sim tags they are linked to keep changing to negative values. The SIM tags will eventually show correctly but this behavior isn't expectable for my use case. For the life of me I cannot figure out what's going on here..

I am using Canary Labs Historian to collect opc data from KEPserver. I am experiences issues where we get NoData due to the fact that Canary is receiving messages with out of order sequence numbers (off by 1). Canary thinks this is an issue on the KEPserver sid. What could cause this and is there a configuration setting that could help alleviate this?

Hello,     I am sorry for this simple question. I want to know is there any configuration to be made on KEPServerEX or Allen Bradley PLC side to write tag values from KEPServer to the Allen Bradley PLC.   In my project data is being stored in database from a KEPServer using a Data logger. Some data from the PLC will be read and stored in the Database and some data we need to write from DB to the PLC. I want to the configurations required to write data to the PLC from DB. Thanks, in advance.

I have an OPC DA client (Citect) writing a value to a PLC via Kepware. The value written is 1, 2 or 3 and once the PLC has seen this, it resets the value back to 0. This works fine.The problem I have is that Citect never sees the value reset to 0 and the value in Citect 'sticks' at 1, 2 or 3. I can however see that in Kepware (via Quick Client) the value is 0. It appears that Kepware is not giving an update to the Citect OPC client.If I restart Citect, the value is successfully read as 0 (presumably because Kepware will then provide a general refresh of all tags to Citect). Is it possible for Kepware to get confused when a tag has two new values in quick succession? (0 to 1 and then 1 to 0) i.e. It sends the first change to the OPC client but not the second change.I have seen something similar with another OPC server in the past where it would forget to send the second update. 

Hi, I tried to connect between KepserverEx V6 with my omron CP2E-N but when I read the value in OCP client it always return Bad quality. I don't know why, and where I went wrong. Below is my config. Please help me. Thank you very much  

Hi there, I am trying to set up some simulation tags to do some testing on software we are writing. I have a series of INT values that I need to write, (one every minute) but I need the simulation to start at midnight... so that is when I want the first value in the chain to be written. I have set up a USER (6000,......) tag, but the value starts when I created the tag, and I can't find any way to start it at a specific time. Is that possible?

Transferring a license from a development server to the production server, it looks like this can be done as long as you have access to the MyKepware account the license originally came from and it still has support? Must also use the same MyKepware credentials when transferring that were used for the original activation? What happens if the perpetual is out of support? Do you have to buy support to be able to move it to a new VM? When you are done with development can you move the license info to the end-users MyKepware account?  Found this info on how to move and then activate the license. Remove the License Activation ID from the local server via the License Transfer process:For more information on Transferring a License Activation ID please Click HerePerform maintenanceRe-deploy License Activation ID For more information on (redeployment) Activating a License Activation ID please Click Here

Has anyone configured a DMG Mori Machining center with a Mitsubishi controller?  I am hoping to see what is available...

Hello,     I need to store tags values from KEPServerEX in SQLite database.     How can I do this?    Thanks in advance. Regards