Mathcad Installation

I cannot get a license to use application.

there is nothing when I am installing this application.

If i am connected to my corporate proxy - the install fails to load asking me to check my network connection. If i drop off my corporate proxy the installer loads. The installer also has to pull download files for product components. I need to know:1. Is there an offline installer available?2. What are the domain and IP proxy exceptions needed for your product? That includes installer loads, product downloads and account registration that occurs post install.Thank you! - Bryan

There is no option to download Mathcad once I reach the "application selection" section of the installation software, it just shows a blank prompt. what do I do to fix this?

When I download the Installation file, the Application Selection appears empty.

Hello,I try to install and open Mathcad 15 on a new PC and when i try to start the mathcad exe, i get an error message that is in german and i propably cant translate it 1:1 but it says something like "the requested license contains an error. invalid host / the hostid of this system does not match the hostid specified in the license file...". I downloaded the setup and installed mathcad with it multiple times because i wanted mathcad on my 2nd drive thats not the c drive with windows on it but even with custom installation selected in the installer, it installed mathcad always on the c drive and i shifted the license file around a few times aswell and tried opening mathcad during mulitple iterations of this process. I thought i mention that in case that might throw things off or corrupt the linces file or whatever. I deleted and reinstalled the license file aswell naturally.And also, if i am on the website and press on the top left corner, select "manage and monitor software" and press

Hello, I purchased a permanent academic licence for MathCad Prime 3.1 in late 2016.  I have had to replace the HDD on my computer and have re-installed Mathcad Prime 3.1 using the DVD which came with my order and Mathcad is working in express mode right now.  However, I cannot access the flexnet software (insufficient privileges) required to install my licence and restore full functionality as I do not have a current support contract.  This does not seem right to me as I was told that I had a permanent licence for Prime 3.1 when I bought it.  I am attaching my latest licence file from PTC if this helps.     Any assistance would be appreciated.     Mike O'Neill

Our company has been using MathCAD Plus 6.0However it doesn't seem to work anymore when we migrate our operating system to Windows 10 - 64 bits.We're looking for a solution that allows us to continue running our Mathcad files (*.mcd) created on the new operating systemwith minimal hassle. I have downloaded the trial version of PTC Mathcad Express but couldn't use that to open the mcd file.Could you tell me what options I have? Will MathCad 15.0 work in this case? Thanks.

I received a link to the 30 days free trial of Mathcad Express but the installation fails. I tried multiple times.

Installer does not show any applications available for install in the "Application Selection" tab. Continuing by pressing install says that it will install 200mb, but does not seem to actually install anything.

I purchased product code but I am unable to locate it

Sehr geehrte Damen und Herren,leider gibt es ein schwerwiegendes Problem mit der Konvertierung bei Mathcad Prime 6.0.0.0.Es erscheint folgende Meldung:Zum Ausführen des Konvertierers wird Mathcad 15 M010 oder höher benöigt. Installieren Sie die neueste Version von Mathcad 15, und starten Sie den Konvertierer neu.Mathcad Prime 6.0.0.0 ist doch bereits höher als Mathcad 15, richtig?Was muss unternommen werden, damit die Konvertierung funktioniert?Vielen Dank für Ihre Unterstützung.MfGBernhard Waldherr

Trying to get Mathcad 15.0 installed. I talked to a representative and started the process of a free trial but for some reason the download stalls at 50% and the number in the progress bar turns from black at 25% to red at 50%. I tried waiting but after an hour I assumed something was wrong. There is a previous version of Mathcad 15.0 installed on laptop being used

I have to activate my license every time i open Mathcad. How can I apply my activation so that this is not necessary.

I have tried to install my copy of Mathcad 11 on a new computer (Windows 10 64-bit) as the old one is no longer viable. I have had no luck. I can't even get to a screen where I can enter the KEY and start the activation process.  I have the original CD and the product KEY. This is what I get when I launch "setup"    Any help would be great appreciated. BTW I do have Prime 6.0 and Mathcad 15 installed on the new PC.

I have a manual flexlm install with one instance of lmgrd listening on port 27000. Multiple vendor daemons are successfully running under that. I'd like to add the new vendor daemon ptd_d into the mix but I'm getting "status 25 Invalid Host" errors when the license file is read.   17:03:36 (lmgrd) REstarted ptc_d17:03:36 (lmgrd) Done rereading17:03:36 (lmgrd) ...Finished rereading17:03:41 (lmgrd) ptc_d exited with status 25 (Invalid host)   My PTC license file looks like this:   SERVER myhostname PTC_HOSTID=XX-XX-XX-XX-XX-XX 27000DAEMON ptc_d "c:\flexlm\ptc_d.exe" 7788   The host machine has two NICs installed. The PTC license file is keyed to the first/main/active NIC.   lmgrd 11.16.2 ptc_d 11.14.1.2 (also tried 11.16.1.2, no change) Windows 10 64 bit   I've tried various permutations of putting things in quotes, using opt files, etc. I even regenerated the license file to use the other NIC/MAC address, no change. Still getting Invalid Host 25 errors. &nb

When one goes to install Mathcad (ver Prime 3.1), the program asks for the product code.  I have looked at all the info I have from PTC (fulfillment letter, hard copy of software, etc) but I do not see it.   Can anyone advise where I would find the product code?   thanks   m8ike

I can't use the start the 30 day free full version of mathcad. I downloaded the file with the licence but nothing else happened (after opening mathcad it looks like the old poor version). What should i do next?

I am currently a student who purchased Mathcad Prime 5.0 student edition in January 2020 and I currently have until the 28th of January of 2021 to use it. I recently got a new computer and I wanted to redownload it again, but when I tried to do that it told me I had no products to update, and I am not sure why. I have tried everything, and the phone support couldn't help me. So if someone could help me solve this issue it would be appreciated.

Cannot activate license. I saved the license file on my desktop and pointed to it's location, but get the error:(-103) Cannot checkout an uncounted license within a Windows Terminal Services guest session.

Kindly Note : Effective January 1, 2022, the only version of PTC Mathcad available for subscription will be PTC Mathcad Prime 7 and future versions of PTC Mathcad Prime. After December 31, 2021, PTC will no longer have the right to sell or distribute software versions moving to end of sale due to a third-party component contained in those versions. For more details, refer note from Mathcad Product Manager.Moving forward, the below mentioned links for Mathcad Downloadable for Version 11, 12, 13, 14, 15 & Prime 4.0 will be routed to latest release of Mathcad Prime.************************************************************************************************************************************************************************ Refer download url  https://support.ptc.com/support/mathcad_downloads.htm Once you refer the above link - Select the release which is to be downloaded. For example, I have selected Mathcad 14.0 release for download -Click on the #Release of Ma

First lets understand what is a Floating License & what is a Node Locked License: Floating License  Open the license file in a text editor Floating license file contains server and daemon information as SERVER __HOSTNAME__ PTC_HOSTID=<SERVER_HOST_ID> 7788 DAEMON ptc_d __PTCD_PATH__ Additional details -  A floating license refers to a licensing scheme where the permission to execute the PTC product is controlled by the FlexNet server (the PTC license server) In the FlexNet server environment any machine configured as a client will be allowed to use floating licenses until the number of licenses purchased has been exhausted The installation of a floating license(s) requires an authorization string, which is specific to the number of licenses (seats) purchased, the expiration date and the PTC_HOSTID for the machine to run the FLEXnet server program For example refer below image: Node-Lock license File contains only machine specific HOST ID(alphanumeric number i

Hi All,   We have Mathcad 15 installed, but now require the Prime 6.0 version also installed.   When we go through the install process, we seem to be going round in circles, and not actually installing the software.   Can someone advise how we can get this software running?   Windows 10 - Lastest OS updates.   Let me know if you need log files etc copied.   Thanks for your help.            

Hello, i have recently acquired student licensed mathcad prime 6.0.0 and set it up, however after i open mathcad, whenever i type ":=" and then proceed to type anything my app crashes with the following error :"An unhandled exception occured on the dispatcher thread. See..." and so on.

from where can i get to download Mathcad