PTC Education

Hi,I just started Engineering Design course this semester and I'm trying to download Creo 2.0. The problem is, I have a Mac, does Creo 2.0 only run on Windows? Thanks,Sherry

Saw this fancy video on the youtubes.....It's one of the main reasons I'm considering switching all of our design from SW to Creo 2 since we still use a spaceframe chassis.The problem I'm having is when I go to insert profiles, I get an error saying that the profiles that included with the software were created with a commercial version of the software. So it makes sense that the profiles won't load since EFX uses profile information stored in a part file. I have no problem with that...I can make my own profiles and have done so many many times in SW- I just don't know how to create my own profile in EFX since the custom profile folder is off-limits to me, and there don't seem to be any tutorials on the subject after searching for some time now.Thanks for any help!Trent

Hello All, Don't laugh.I have the Student Edition of WF5 and had to install a new network card. Now WF does not run. I get a pop-up window that displays the license server is UP.The subsequent line is: Warning: (-3) No license server system for this featureThere is a license server manager / vendor daemon running but its for other vendors.I re-installed WF 5 using the product code and my ID but had the same net result.Any help would be appreciated to get this install up and runng.Best regards,Ricardo

Good evening together,I am writing here because I have a serious problem to install pro engineer / creo 2.0 on my new computer.I just startet my studies in Germany at the AKAD University for which I need the programm installed. The University supplied a CD/DVD with the programm - however the installation does not work because the system immediately creates an error message saying that coretools_sh.dll is missing. I short search with my good friend google showed that it is not a good idea to just download dll files from any site. But I need to install creo 2 somewhow.The System I am trying to install the programm on is windows 8.1. I am getting to the end of my computer/IT knowledge and don't know what else to do since I already followed 3 online "tutorials" which should fix the problem but didn't.I appreciate any kind of help.Thank you in anticipation!

We are trying to see if our mentor can download Creo so he can help us out with our designs even when he cannot make it to the meetings. Is it possible for him to download Creo or is it student-only?

Has anyone seen the new Transformers movie yet? Just watched it last night. Awesome. Here's the trivia question. Which FIRST FRC team picked a cameo during the scene in the barn/workshop?

I am unable to install the license file for student version of Creo 2.0.I am unable to enter the product license code.Please help me as fast as possible.

is it possible with Creo 2.0 Parametric Student Edition to welding ?

Hi,I am currently a high school student looking to get into CAD. I have spent a lot of time with Inventor but I would like to move on to better software. I mainly do stuff with VEX parts for my robotics team but I'm having issues. Is it possible to import Autodesk parts into Parametric? Here is the link to the VEX parts I use http://www.autodesk.com/education/competitions-and-events/vex/recommended-software (the 2013/2014 version near the bottom), if that helps. I know with Creo 3.0 this is possible but I'm unsure about the Student 2.0 version.Any comments you guys may have towards this would be much appreciated!Thank you!Jake

Hi,Quick update for everyone using the FIRST Windchill sever @ http://firstrobotics.ptc.com/Windchill. PTC is in the process of updating this server from Windchill 10.1 to Windchill 10.2. As we make this move, we'll be consolidating all the PTC Academic programs onto a single server located in Needham, MA. This is an exciting move for us and consolidating all the programs will make things much easier for PTC to management and for participants to work with.Fear not, this change will not impact you or your work. It will be a software update and all your data is safe. Nothing is being removed. PTC will simply update the Windchill software and next time you log in, you be connected to the latest and greatest version of Windchill. Our plan is to comlete the update and "go-live" before the end of August. I will share updates along the way to let you know about the progress and any potential service interruptions. -ScottPS. As part of this process, PTC will be shutting down the old Windchill

Hi people, please advie me on how to do a vshaped groove on a cylinder. Its rather urgent, please help me people. Thanks!

after opening creo parametric its showing the message below and closing

I would like to be able to find the rotational moment of inertia of an assembly (that is, to disegnate which parts move around the axis and get the moment for those parts together). There are several different materials involved in these parts. I have the density (kg/m^3) of all the materials. I tried setting mass poperties but everthing in the window is greyed out or locked. And even if I could set that, I am unsure how to find the moment. How do I go about doing this? I could do it one part at a time and sum if needed, since inertia about the same axis is additive.

I am an absolute beginner with CAD. I am trying to model a bolt and nut so that I can test it failing under various condidtions. I Have been following this video https://www.youtube.com/watch?v=LyMfcRl71do which is very useful, although I only have a student account. Just as I was about to get to putting the thredad on my bolt, the video at 14.53 tells me to open a file called unf_external_thread_profile. Which I dont have. Can anyone help me with this?Also I have built the bolt so far need to convert it from inces to mm, is this possible.Sorry to ask such basic questions, but like I say this is my very first time using CAD.CheersMarcus

I have a problem and I hope enyone could help me with that.How can I create a .mtl library at the First Windchill server?I save the .mtl-file in my workspace but i couldn't check it in. Also the .mtl-file was not shown in my workspace at my browser.What do I wrong?

Hallo ich habe soeben Creo 2.0 installiertund wollte eine Baugruppe erstellen leider konnte ich keine Baugruppe öffnen und keine neue anlegen Es wurde auch kein Fehler angezeigt. Es passiert einfach nichts. Einzelne Teile funktionieren wunderbar nur eben das erstellen einer Baugruppe macht Probleme gibt es da einen Trick was man beachten muss? würde mich über jede Hilfe freuenGrußTobias

In an effort to produce a more realistic solution, our team has begun to consider the use of carbon fiber as a material. However, how can we calculate weight and therefore cost of the aircraft? I understand that there is an excel worksheet for this based on design variables; is there a way we can edit this worksheet to account for the properties of carbon fiber?

Hello,I have a problem, too, starting Creo 2.I did the installation according to the guide I got via email. When I start the program I got an error but only says it created a traceback file and I should send it to the stuff. I don't know where to send it so I think this must be a good place to show my problem to you.Inside the traceback.log this is written:-------------------------------------------------The trace creation timestamp is: Sze máj. 14 14:11:14 14The executable build timestamp is: P febr. 28 17:21:55 14The datecode is: 2014000The pro machine type is: x86e_win64The process ID is: 5736The traceback type is : CRASH-------------------------------------------------Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 3728.Main Thread 3728=====================Thread 4284=====================0x00000000770712FA NULL (NULL:0) (ntdll:0x0000000077020000) ( 0x0, 0xe438ac69, 0x0, 0x388fc88 ) 0x000007FEFD0B10DC NULL (NULL:0) (KERNELBASE:0x000007FEFD0B0000) ( 0xe376b0, 0x1, 0x0

Picture holders or photo frames are really popular projects in schools which prompted me to try out the Sheet Metal (I hate that term!) tools in PTC Creo.The secret to the tight fold is using a flange wall and choosing the 'Flushed Hem' option in the ribbon menu drop down list,  Modelled and rendered using PTC Creo.

In response to a post in the Product Design Facebook forum, I created this proof of concept for a cantilever box.  The link geometry ensures the tray remains horizontal through the full motion. Video Link : 5140

after i download the creo2.0(for student) , i cant see any front or top or right one the screen, i check all the options, it all right , but i cant choose any side or sketch place , even i choose top at will , still cant sketch or do anything , i try to download again , but still the same , just like the photo i upload , that is i prt screen, hope someone can hlep me , it will grateful .

Hi,I'm running windows 7 32 bit and I have the Creo 2 Student versions of Direct, Layout, Parametric, Simulate, Platform and Portmapper I downloaded several days ago. I'm trying to Uninstall through the Control Panel each one of the listed items but I keep getting the popup message: "One or more files are currently in use". I was able to uninstall the quality agent and one other item (I can't remember what it was). I've rebooted after removing the two aforementioned items but still no luck. I can't see anything running in processes that might be causing the problem. Don't see anything under services either. Any help would be greatly appreciated.

I just downloaded creo 2.0 and I cant start creo, because it crashed, and it ask me to send the trace back log to technical support. I need to use this for my course. Please help. The log is attached in this post.Thank you.

In this video we will go over the process of installing PTC Creo 2.0 from the DVD downloaded in the previous video.   Next Video: Part 6 - Configuring Creo   If you have any questions which are not addressed in this video, please leave a comment below or start a new discussion and we will get back to you.     (view in My Videos)

Hi,I've got the the basics of a mech going but I know want to have the cam follower push the lever up and gravity let it fall back. I've tried making a slider link but to no avail.I've attached a zip of the file I'm working on.Any advice greatfully accepted!Peter