PTC Education

Hi,I'm an engineer student in Denmark working for a engineering company as part of my education. At this moment we are working on some parts we need to have tested/simulated before making prototypes and test the parts irl.I'm have installed on my computer:Creo Direct 1.0Creo Distributed Batch 1.0Creo Parametic 1.0Creo Simulate 1.0Creo View Express 1.0Legacy Structure 1.0Legacy ThermalModelCHECKThe workers in the company uses AutoCAD and we have run into some problem regaring the two programs working together.AutoCad can save to these types of files:I want to have as much "mobility" to wotk on the drawings as possible so which type of file should the company use in order for me to work with them?I will need to make changes on the drawings, I will need to simulate/test a given force to a part. I want to change between materials the parts are made from and I need to make a presentation of the part with colors, backgrounds etc.Do you have any recommendations?Best Regards,Thomas

Looks like the models for both Omni Wheel parts in the Tetrix Kit of Parts are for the 4" wheel:Is there a correct model for TETRIX part W731132 (3" Omni Wheel) available for the 2012 KOP? I did find a 3" Omni Wheel model in the 2011 KOP we can use.Regards,Joe HighamMentor, Bionic Gaels FTC Team #5602 Kennedy Catholic High School http://bionicgaels.wordpress.com

Whenever I create anything in Creo, the dimensions are impossible to read. I am using creo 2.0 student edition.

You guys have been a great deal of help to our team so far. Thank You!We do have another issue that I'm unsure how to resolve.We created this claw, and have pin joints between in the following areas. Everything looks like it will work perfectly, I just cannot figure out how to connect the motor back to the motor housing, since I've already constrained it to the arm. Is there a different way to constrain the pieces so they will form a complete loop?

Hello! I have a problem with intalation Creo Elements pro 5.0 Schools Edition. I have an Internet connection, but when I click "generate licence file" it says "this mode requires internet connection to connect ptc.com". Please help

There are three versions of Creo listed on the Academic download site. Previously there were issues with some versions of Creo working with Windchill. For the RWDC, should we download and install Creo 2.0, 1.0 or Pro?

"How can I download the models used in the tutorials so I can follow along the exercises"   We are not providing these files for download from PTC University Learning Exchange. This functionality is only available in our eLearning Libraries through PTC University Precision LMS. There, all models for all exercises are included in the eLearning license. If you would like to learn more about PTC University eLearning Libraries, please visit our eLearning website or submit a contact request to our Training Advisors.     If you have questions about a specific video or have suggestions for new topics, please start a discussion in the Training section of PTC Community – we appreciate your feedback.

"The video I have just watched doesn’t have sound."   Tutorials on PTC University Learning Exchange come in various formats: Some are text-based descriptions, some are slidehows, some are video tutorials. Among the latter, the majority is with sound, but some are without.   Each contributor at PTC can decide about his/her preferred format. So when you run into a tutorial without sound, this is not a technical issue.         If you have questions about a specific video or have suggestions for new topics, please start a discussion in the Training section of PTC Community – we appreciate your feedback.   If you would like to learn more about training options for the PTC products, please submit a contact request to our Training Advisors.

Conceptual Design: Part 2 The second phase of the Product Development Process transforms the outputs of the first phase into complete designs that are ready to be manufactured.   It involves creating models and simulations as well as performing tests to make sure the designs will function as intended.   Click Here to view the downloadble version of the video.     (view in My Videos)

Conceptual Design: Part 1 The second phase of the Product Development Process transforms the outputs of the first phase into complete designs that are ready to be manufactured.   It involves creating models and simulations as well as performing tests to make sure the designs will function as intended.   Click Here to view the downloadable version of this video.     (view in My Videos)

HiI have imported a model as a prt. and reworked it in Creo Parametric, now I need to save it as an stl. so it can be 3D printed.But for some reason it's not actually saving as an stl. The model is solid and saves as a prt. easily but how do I get an stl. out of it?ThanksJeremy

Hello,i have a problem with display work area. I have CREO parametric 2.0 students edition.After starting CREO don´t appear workarea. See attached picture.Could you give me some help??Thank you very much.Michal

Hello,I have just installed Creo 2 and I cannot get it running at all. Specifically, clicking shortcut icons or windows start menu icons does nothing, the only confirmation that I get from my computer that i clicked those icons is that I get a little loading circle by my pointer for about a second and thats it. Nothing opens, no apps launch, no processes or services lunch, nothing. I have triend reinstalling and I have tried updating my graphics driver and neither has helped.Thank you.

This is a basic Creo color file that includes the primary colors. Students often ask me for more colors and why Creo does not come with more configured colors. I cannot say why it does not come with more, but you can see how easy it is to add more. Just open the Appearance Manager and Open this file to add a huge set of colors to My Appearances. If you want to have Creo load it every time, just leave it in your My Documents folder or set the config.pro option pro_colormap_path to identify the folder you are keeping the color map and appearance files.

I am a third year Honours student at Glasgow Caledonian University where I am doing BEng Computer Aided Mechanical Engineering.I am looking to see if there is a free/discounted Pro-Engineer Wildfire download available or a trial version.I have a project that will go towards my final mark and having the software at home would be very beneficial.Thank you for your time.Gary

Hi RWDC Teams!We have released two new curriculum guides for the 2013/2014 RWDC season. They are as follows...How to Model Almost Anything: This new curriculum is an in-depth introduction to PTC Creo 2.0 which takes the user through the various aspects of solid modeling. It is made up of four parts: Getting Started, Part Modeling, Assembly Modeling, and Virtual Laboratory.How to Develop a Product: How to Develop a Product is an advanced guide that will show users how to bring a product from concept development to product retirement. It is made up of four phases: Concept Development, Detailed Design, Production, and Field SupportGood luck on the upcoming season!

Hi guys,quick question. I know a team in Portland, Oregon area that may be interested in using Creo Direct. Is this currently available?Thanks,Josh

Hello,I have a Student License for Creo 2.0 and it worked when I first installed it. I don't remember the licensing process, but I know that in that process a license file was generated, because I still have it. I thought that for reinstalling I only had to use that file and the licensing would be done, but the truth is that it only asks me for a code, but I don't think I have it. What should I do?Thanks in advance,Francisco

Can someone please let me know when the new FTC field will be uploaded to the USFIRST website? My team has been waiting for the field so we can test if our robot will work.

We are trying to create a pattern around a cylindar so that we can create a fan blade for one of our projects. I made a cylindar for the base of the assembly, and I created a blade, but I cannot figure out how to pattern copies of the blade around the base evenly. Any suggestions would be much appreciated.Thanks.....

I have installed Creo 2.0 and all the stuff with it, I've tried with and without the quality control agent. But when it finally finishes installing and I click on it to start it literally nothing happens. Nothing loads, nothing shows up, nothing happens at all. Help me?

In this video we will install or update Microsoft .NET Framework on your computer.   Next Video: Part 3 - Downloading   If you have any questions which are not addressed in this video, please leave a comment below or start a new discussion and we will get back to you.   (view in My Videos)

Can we run Creo 2.0 Academic edition on a computer with Intel Integrated Graphics and a 1366 x 768 display? If yes, is it even worth it. The computer is Dell Vostro 3450. The specs say that it supports OpenGL. It has win 7 64 bit and 4GB. We are a rookie First Tech team and would like to try out our free Creo 2.0 license. But for now we don’t have access to any PC that is either supported or certified in PTCs official list.

Virtual Laboratory PTC Creo was developed so that engineers and designers could do simulations and predict how a product or part would react to given loads and conditions. In this way, PTC Creo becomes a virtual laboratory where experiments of all types can be created and performed.   Click Here to view the downloadable version of this video.     (view in My Videos)

Is there any place where you can find pre-made Tetrix part with which you can manipulate and work with in Creo?