PTC Education

During this webinar, PTC will be covering the process for which a team would solve the challenge using a baseline design. We will be looking at the different phases; including concept, preliminary and detailed design. The intent is to help educate teams on what they should be doing for the challenge.   (view in My Videos)

During this webinar, PTC will be covering the process for which a team would solve the challenge using a baseline design. We will be looking at the different phases; including concept, preliminary and detailed design. The intent is to help educate teams on what they should be doing for the challenge.     (view in My Videos)

HelloI am sorry that I am posting in the wrong forum section. I wasnt able to find any section matching my problem.I purchesed a Pro/E Wildfire 4.0 Student Edition licence last year in my school, which should last 5 years or so.It worked like a charm. But I needed to reinstall my computer.At the installation the licence is no longer accepted. It states that it has been activated too often, when i want to validate a licence file.The problem is, that I need to work Pro/E in the next 24 hours, because of some work for my school. Hopefuly someone knows a solution to my problem.regards max

every time that i open the ptc install manager in order to get my license. the ptc install manager begin to run when it up to 100%, it is disapear and never come out. I try many times but still cannot open it. what should i do?

When I opened Creo for the first time, it looked like this: http://i.imgur.com/UoMXX.pngEverything is completely upside down. I have no idea what's going on. Can anyone please help me?

I have run PTC Installer and tried to save the license to the my documents, but it won't appear there.In an effort to work around this, I ran PTC Installer on my friend's computer and emailed the license to me and continued with the installation. Now, however, the programs will not run because they do not have a valid license.What should I do? The license won't save to my documents so I have no idea how to retrieve it and install it properly.FYI: I am using Windows 7 on Parallels 7.Thank you.

I know the student edition is free and they give you a product code in the email. But does it ever expire and be rendered inoperable after a period of time?

During this webinar, PTC will formally introduce the Aviation and Surface challenge to all teams. We will explain the challenge requirements and the overall objective functional that need to be satisfied. This webinar will kick-off a series of process webinars throughout the season.     (view in My Videos)

Hi FolksI have Creo 2 student edition installed but when i try to run Layout 2.0 the software all I am getting is a box pop us with with a chinese symbol along the top a yellow triangle and the word Message beside it, there is an OK button but the box disappears and Layout 2.0 does not start.I am running Vista SP2.I have ran the reconfigure to see if that made a difference, I have also reinstalled the quality agent with no difference.any help appreciated.

I'm having problem with creo 2.0 student edition. Installation went well but when i run the creo parametric or any other module it keeps crashing after Splash screen.Intel Dual Core E5500 CPU,4 GB DDR RAM, ATI RADEON 5450 GRAPHICS ADAPTER.please help..thanks

Week 6 of PTC Robotalk 2012 focused on Conceptual Design using PTC Creo. Jordan Cox prepared a video demonstrating the use of Creo Parametric to construct a dynamic 3-D concept model using "block parts" rather than material from the FRC kit of parts. The demonstration focused on the task of lifting and placing tubes on a rack, much like the 2011 Logomotion competition.  Here is the video:Conceptual Modeling using Creo Parametric Video Link : 3425 Constructing  a model such as the proto-robot in the video requires a basic understanding of 3-D modeling using Creo. Yet, the dyanmic model that results from using a few basic sketches and extrudes and combing parts with a few basic assembly constraints provides a powerful starting point for conversations about designing motor assemblies, game strategies, and mechanism design. Emphasizing this point, Robotalk panelists Mark Fischer and Chris Hartmann conveyed their experiences working with teams in prior seasons. Using Creo to build

3-D Parametric Design is a powerful environment for conceptual design as well as for building fully functional models of FTC and FRC robots. This video demonstrates a simple conceptual design for a robot for the 2011 Logomotion season. The task of building the model requires only a basic understanding of Creo. Yet, the model enables consideration of important engineering requirements whose careful study at the conceptual design stage can dramatically improve the final robot design stage.     (view in My Videos)

I saw this Symposium on the PTC.com site, but a search in the PTC Community turns up nothing. It seems it should be mentioned here by someone with PTC, say in a blog for this space?

Hi,I've Creo 2.0 Student Version and wanted to install it.At installation allthing runs well. All OK.But if I start Creo 2.0 Parametric then there comes an errormessage: "Could not start the quality assistant. Errorcode: 0x5".I'm from germany so my error looks like the picture.What should I do?Thanks alot.

I am part of the Kettering, Ohio team, and our students have still not recieved invites to the windchill project page. The instructor has recieved an email, however, approximately a few weeks ago. We registered within the first few days that registrations was open, and included email information for all of the participating students. Even so, we have still been waiting for the invitation. If we have possibly done anything wrong, please let me know, or if it is delayed, I would like to know that we will recieve the invitation still at an approximate date. From the webinar I heard that most teams had already recieved the emails, so I was concerned because our team registered fairly early after registration opened and have not recieved anything besides the instructor email.

September was Mathcad month! PTC's FIRST Program team decided to begin the year with Mathcad Prime because FIRST participants can use Mathcad's capabilities in their STEM classes at school as well as when designing a robot. In fact, we believe that if students use Mathcad in math, science, and engineering classes at school, they will be better able to apply their subject matter knowledge in FIRST Robotics. Thus, Mathcad was a logical place to start the Robotalk season. Weeks 1-3 introduced Mathcad's interface to the participants, taught basic skills of creating an engineering worksheet, and demonstrated Mathcad's tools for both numeric and algebraic (CAS) solutions to problems. The specific content of these webinars can be reviewed in previous blog posts.Week 1: http://communities.ptc.com/community/academic-program/first/blog/2012/09/05/getting-started-with-mathcad-prime-robotalk-webinar-1-september-5-2012Week 2: http://communities.ptc.com/community/academic-program/first/blog/2012/09/

Mathcad offers great functionality for measurement and instrumentation applications. In this video Chris Hartmann demonstrates the use of the READCSV command, one of many data importing functions, to easily import sensor data into a Mathcad worksheet so that the data can be plotted, modeled, and interpreted in a self-documenting worksheet. (Part 2 of a 2 part demonstration on working with data).   (view in My Videos)

Mathcad Prime has excellent matrix capabilities for entering, managing, representing, and analyzing data. In this video Chris Hartmann introduces these tools to the user, providing enough detail for new users to begin using Mathcad Prime to work with their own data sets. (Part 1 of a 2 part demonstration).       (view in My Videos)

Installation video for FloEFD Pro 11.2.     Unable to play video. Please try again later.(view in My Videos)

Installation video for Mathcad Prime 2.0.       Unable to play video. Please try again later.(view in My Videos)

Installation video for Creo Elements/Pro Educational Edition.     Unable to play video. Please try again later.(view in My Videos)

During this webinar, PTC will be covering the details for your team to get started with this seasons challenge. We will explain the available tools and procedures to download and install the applications. In addition, we will cover the use of Windchill for your team collaboration.   (view in My Videos)

Here is a video from the ROBOTALK session on October 3, 2012 that shows how to do top down design.     (view in My Videos)

Hi,I am a student and University asked me to download Pro engineer wildfire 4 schools edition..I'm going to install it by double-clicking the "setup.exe" ,then a window opens and the loading bar stops and a message " "ptcsetup.exe" has stopped working" appeared. Why? A friend has the same PC configuration and it works for him but not for me...Hoping you find a solution to my problem.Good evening.Kevin

Hello all, I'm trying to install Creo 2.0 Student Edition using the Installation Assistant. I'm follow the instructions given in an email:Step 1: Download Creo 2.0Install from the web (26 MB) - Download a small executable to start setup for Creo 2.0. During the install of the edition, the required files are pulled from ptc.com. A PTC account is required.Download Full Media (4.2 GB)Step 2: Creo 2.0 Student Edition Product CodeFor the Student Edition you will need to enter the following product code during setup -BK390206EDSTUDENTUNICLStep 3: Install Creo 2.0 Student EditionStart setup.exe on your machineSelect Install New Software. Click Next.Accept License agreement. Click Next.Enter the student edition product code - BK390206EDSTUDENTUNICL. Click 'Install Licensing' to generate the license file. Once created, setup will add the license file to the license summary section. Click Next.On the product screen, deselect MKS.Click InstallSo I choose "Install from the web" and go through ever