Windchill

Looking for help with workflows from NX PCB exchange (A Maya product) to Windchill 10.The IDX xml file from Cadence when imported ino NX loads all 3D components only if they are present in the local workspace. Can NX search from our global Windchill database across projects and load parts that are listed in the xml .idx file?

Hi All!How do you use Alternate and Substitute? Let say I have two sets of hardware components for a particular product - cheap for preproduction use (testing and so on) and expencive for production. How do I set alternation or substitution only in the context of one product? How do I show that component has been substituted in the context of this particular BOM? right now it lists all replacement and substitutions, but nothing points "use this component instead" here. And since I am replacing a library component it adds replacement everythere it has been used - in all products...Any suggestions or best practices are appreciated!BTW I am trying it in wc10 PDM Link.Thank you,😄

Hi. Paths to actions.dtd and actionmodels.dtd are wrong in some \codebase\config\actions\*.xml They look like '../../actions.dtd' and '../../actionmodels.dtd'. Why? How i can fix this? Thanks.

I m in need of checking the exact procedure to perform Local Replication. I had raised a case and PTC tech support have closed it saying only PTC global service team can help on it. https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=12652764.Any one who has tried local replication in 10.2 ? and has worked ?

Perhaps I am missing the point of what the Supplier Organization for a new Supplier should be. I was going to create a New Organization (in Participant Administration) for each new Supplier. "Acme PLM" would be the Organization. "Acme PLM" would be the New Supplier with an Organization of "Acme PLM" How are others using this? This is not very clear:  https://support.ptc.com/help/windchill/wc110_hc/whc_en/index.html#page/Windchill_Help_Center/SumaSupplierOrg.html

Hi All, What will be the best approach to migrate CAD data with relationship and it's attributes etc from legacy stem to Windchill.   Regards, Vivek

Hello All,   I have a small doubt on Local Replication process. I initiated the Local Replication process as below: 1) Load local replica vaults, folders and mount them using Fvloader. Syntax to create local replica vault: LRV,<local_vault_name> Syntax to create local replica folder (same as creation of normal folder): RF,<folder_name>,<local_vault_name> Syntax to mount folder (same as creation of normal mount): RM,<folder_name>,<master_hostname>,<path_on_master_host> Enable replica folder: RFE,<folder_name> Enable replica vault: RVE,<local_vault_name> (Introduced in 8.0 release) 2) Set the following property on master site: <property name="wt.fv.localReplica" overridable="true" targetfile="codebase/wt.properties" value="true"/"> 3) Specify replication rules on these local vaults and run schedules. 4) Use the following CSV with Fvloader to move all local vaults to replica site: LRMV,<local_vault_name>,<replica_site_nam

I am getting error " wt.doc.WTDocument.toWTDocument(java.lang.String)" while creating WTDocument of document type "test_doc".

I have datasheets and request emails to attach to parts, hundreds at a time.I don't want to use the commandline (NMLoader) method, although i have in the past, one reason is that it leaves no traces (iterations).Is there a way to use ImportSheetType=Document, can I see an example please?I have been creating parts using Import From Spreadsheet, that works well most of the time.Hans SchulzeI am surprised that online help doesn't mention this function much.  Was there a manual or guide written for it?

We have WT Documents with an attribute called EXPIRATION_DATE, and is populated with a date yyyy-mm-dd. The WT document is located within a Product. I want to create a report that will search a Product for all documents and display the expiration date. Other fields would also like to be shown, like name, number, description, title, state, revision.   Can someone out there help me with how to use Query Builder, if in fact that is the best way to accomplish this??   After I receive the report I want to modify it to list all those documents which expire in 10, 30 and 90 days from a date. This could be done in Excel.. no need for help with this.   Thank you in advance.

Hello ,   I have a setup installed with navigate 1.1 and windchill 10.1 Some IBA Values like version is not displaying completely like iteration are not displaying in it . Also in PartListApp the table is not population sharing some of the logs of thingworx . It would be great if anybody could help on the same .   Kind Regards , Amar 

Somebody can tell how I can create a simple query "select max(versionSortIdA2versionInfo) from WTDocument;" in Query Buider?I'm using Windchill 10.1 M030... The problem is in the MAX function...Thanks in advance!

I've installed the Adobe Experience Manager (AEM) 6.3 using the turn-key installation. What I need to do now is run the admin UI over https using a certificate signed by our Certificate Authority (CA). I've tried using what I can find on the Adobe site to create a certificate signed by our CA and configure the Experience Manager to use that certificate but I when try to connect over port 8443 it still creates a self-signed certificate.   I know PTC doesn't support running the AEM 6.3 over SSL but  has anyone had any luck (or tried) to configure a turn-key AEM 6.3 installation to use a certificate signed by a CA?

I'm trying to understand how a change notice could be used in place of a promotion request. Does the change notice need an implementation plan and change tasks or is the change notice object itself sufficient to handle the promotion process? Where do I choose the target state for the objects being promoted?  There is a page on the promotion request wizard to select the target state but I'm not seeing anything like this in the change notice or its related change tasks. Same question for reviewer and approvers.  Where are these roles selected if using a change notice? Thanks!

Dear Community, Looking for some guidance. I am just starting to configure Supplier Management on WC 11 M020. One of the first steps seems to be to create the Suppliers. To do that, I seem to need to create a New Organization in the Participant Admin page for each Supplier as that is used when you create the Suppler. Then you can select the Organization or create on at the same time. What I want to do is use a different Organization ID than the default list (CAGE Code / DUNS NUmber / ISO 6523). We would like to use the ID number generated in Oracle (ERP) for each approved supplier. How do I get to that pick list? I do not see it on the Attributes list for Organization ID in the Type and Attribute Management for Organization at Site or Org. So, how do I update that list?  

Hi All!   I would like to ask, what is the difference between "Node-Locked" of Heavy & Light License and "Floating" of Heavy & Light License? Kindly reply as soon as possible.   Thank you once again!

Hello,Is there any method to figure out just what the contents of a PTC CD is from the name?For example: "MED-60318-CD-101_M030" and the rest as seen here:Thank you.Regards,ML Starkey

Hi All,I am geting WSview error message, while try to checkin files includes assembly, parts and family table parts.Even no dependencies noticed through reference viewer.Thanks in advance.-Ram

Hi all   According to this Link: https://webstore.iec.ch/publication/6946 the Norm TR 62380 has been replaced by the IEC 61709. Will there be an update in Windchill Quality Solutions (62380 --> 61709) or do we have to buy another prediction standard?   Thanks for your feedback. Best Regards Martin

I asked a couple of months back what topics people would like to see posting on – I asked about Installation, Upgrade, Migration and Integration. The feedback I received was that there would be interest in posting/discussions on Migration.  This document is an initial post with an overview of the options. If there is interest I will write something up about each topic. There are many ways to migrate data into Windchill depending on the type of data to be migrated – Document, Parts, EPMDocuments, Workflows, Principles, Organizations … and there are two major types of migration – Windchill to Windchill and Non Windchill to Windchill. I will attempt to cover all of these over the next few postings Windchill To Windchill: Depending on the amount of data and the type of data there are several options for how this can be done. Windchill OOTB loaders – works for wtparts, wtdocuments and other data types. Does not work so well for EPMDocumentsWindchill custom loaders – can be created for

I'm looking to add a Where Used report that only returns items if the parent part is the current version. WC 11, M020   I see there is some help here but report creating is not in my wheelhouse 🙂 https://community.ptc.com/t5/Windchill-Questions/Resource-for-reporting/m-p/448738   Attached is a version of the report but for EPM Docu's

We are weighing software options for advancing our management of product development projects.  We're evaluating tools in our ERP system (Infor Syteline), a custom tool and possibly Windchill ProjectLink, as we use PDMLink for managing project related information (primarily CAD).  A couple of  resources have told me ProjectLink really isn't a tool that allows you to manage resources, predict and track project timing, integrate cleanly with tools such as MS Project (contrary to PTC's literature) etc. - that it was more of a way to more easily share information, including CAD data, in a less controlled "sandbox" format as product is in early development  / "what -ifed" versus later pre-production or released to production phases of its lifecycle which might be more tightly controlled in PDMLink.  Is this accurate?  Any experience based advice / words of wisdom / opinions on the capabilities and proper application of ProjectLink?Regards,Erik Gifford

Can we link a task in ProjectLink today with a workflow step? For example, I can have a workflow with a series of steps and each step can be mapped to a task in ProjectLink(Gantt Chart). Now, upon completion of a workflow step, the Gantt chart (task) can be updated as "Complete".So, project management is automatic and no need for the project manager to go around to find out what tasks are complete to update ProjectLink (Gantt chart)? It is updated real-time!

Our IT dept is transitioning all our servers to the cloud and is asking for a time study.   They would like to know how much time certain activities take on what we are currently running then what it is on the cloud servers.   I have put together a short list of some tasks and have listed them here.  But I was wondering if anyone could share some other tasks that might help with this or if you have comments about my list. Searching Adding larger files to a workspace Running a larger report in the Report Manager Picking a folder in PDMLink with a large number of files that show a large number of attributes.

I try to get the assignee from a ChangeActivity2 object How can I fetch the "Assignee" by calling webjects?