Windchill

@Operation failed because the user did not have the necessary permission on the following objects to perform the operation: Format  - jjk_cadform_b_stdrd_wm.frm, -.1I recently installed Windchill 11.0.  I am setup as Manager as well as User. I sure can use some help on how to set the permission for drawing format in Windchill?Best Regards,GWC

What is the difference (if any) to the end-user interface in Windchill when the system architecture is designed to use one container versus multiple containers? (I'm not asking about impact for system administrators, just the end-user experience). Thank you.

I want to fetch the Manufacturer /Vendor Organization for a Manufacturer part. I am able to get the Manf./Vendor part. I want to fetch the Contact details of the Supplier, for which I will need to fetch the supplier organization. Need Help. Thanks.

Family Tables are a headache with Windchill. One many of many issues is it's very easy for Creo users to remove Instances from Family Table by simply hitting Delete Row inside of Creo but this can create undesirable scenarios if the objects are already in Windchill. Since the Deleted Instance is now longer attached to the latest Generic model, if a previous Assembly in Windchill used the Deleted Instance, you are unable to update to the latest Generic rev in a workspace. You're stuck with out of date objects in your workspace. However Creo lets you delete instances without telling you that could be bad for Windchill. Our 'standard' has been to tell users not to delete instances from Family Tables once they're in Windchill and simply filter the undesirable instances off the drawing. New users have a habit of finding out the hard way that they shouldn't delete instances. I was curious what other people do... Not worry about it? Found a way to prevent users from deleting instances from Cr

I cannot for the life of me find where the association link types are living.   I have the links, now I just need the association text...   Any help would be appreciated.

I have a user that needs to convert old RELEX files in to Wind chill 10.2. HE is unable to File-open. Is there a conversion utility available? I have never used Wind chill before, so I have no experience with the product.Thanks for any help.

Hi,I have a 5 sub types of CAD Document. Recently i have deleted to Attributes from the EPM Document after that i could not able to see any of my sub types under CAD Document.Can anyone help me to sort out the issue ASAP.

PTC is partnering with analyst firm, CIMData, on a research report on cloud-based PLM adoption. We want to know the best way to make your transition to the cloud as smooth as possible. Take CIMData's 5 minute survey and help us improve your PLM cloud adoption process: http://tinyurl.com/CIMdata-PTC-Cloud-Survey

I want to put a password verification for a workflow task , who ever get that task to complete, first enter password then only they can complete the task.

I wonder if anybody can recommend a good training for an engineer that can be found on-line.Thanks

In CEM module, multiple Cause (FailureModes) codes cannot be associated in one row within table. We want to request functionality to be able to do that.

Hi all,     How to move the files stored in database as BLOB to the file vault? Could anyone help me in this?Thank you Sumit Patil

I'm trying set the state of all the objects attached to a promotion or CN back to the state when they started the workflow. The problem is the objects could have multiple starting states, either In Work or Development In work, so I can't use code to state state of every object attached to the promotion or CN. I was thinking to query the objects, which could be a combination of WTPart, WTDocument, and EPMDocuments, and maybe finding the maturity history of the latest revision, and setting the state to that initial revision. Problem is, I don't know how to do any of this. Has anyone experienced or written code to do something similar?

Hi All,I have a Problem Report having 10 Custom Attributes on it.My requirement is like that, if User belongs to Group A tries to create a Problem Report, for him/her only 5 Attributes should be visible.If User belongs to Group B tries to create a Problem Report, he/she should see 7 Attributes on his creation page.If User belongs to Admin Groups, for him all 10 custom attributes visible on Problem Report creation page .Is this feasible by using any UI Validators ? datautilites etc ? Regards,Vivek

Hi,   I have a requirement as follows 1. There are 2 document objects used in windchill (say Doc1 and Doc2). Doc2 can be created only when there is Doc1 (i.e. Doc2 can be created from details page of Doc1, The Doc1 number will be added as an attribute value in Doc2)   2. I wanted to create a report such that the output should show the value of Doc1 number and Doc2 number but with the condition that the Doc1 number should be in output even though Doc2 is not created.   Any suggestions would be helpful.   Regards, Logeshwar.J

Hi All,we have created some Business attributes for Problem Report.our requirement is to show these Business Attributes on task page of problem report i.e. Analyse problem report task page.How we can achieve this. please let me know if any one knows any idea/way to do this.Regards,Vivek

Overseas deployment of a copy of the site,and overseas documents need to return to Shenzhen, but some of the control of the document entity can not be returned, Windchill existing mechanisms can be configured to solve ?(Master fileserver?) Trouble to provide a solution, our Windchill version is 10 M020

Dear all,I don't know about PTC windchill. Can you give brief about windchill and its purpose

So if someone is going to modify a model that's in Windchill you have two general options:You can check it out to your Workspace, modify it, then check it back in.You can save the model to disk, modify it on disk outside of Windchill, import it back into your Workspace, and finally check it in.The first option is what I would hope is done the vast majority of the time.  But I'd like to be able to check for this.  Is there a way you can tell?Thanks.

I will be upgrading servers in the near future.  All we’re doing is a physical to virtual conversion, so the hardware is being upgraded, nothing on the software side changes. The server’s hostname and IP address remains the same as well.  My IT tech says the client machines will not know the difference but my CAD support(reseller) says I will need a re-host of Windchill at a cost of $4000.Any thoughts?

Hello,I knew that we can add many new attributes to send to ERP system using ESI Integration (Distribution Target). Is it possible to send stream data (for eg: PDF file) using ESI integration?

After a successful patch of CPS22 from CPS2. I received emails saying that I had several participants that were disconnected from LDAP. I have read the article on how to search for disconnected participants and either delete them if they are no longer used or add them back into LDAP, but my question is do I need them?I don't recognize these License users, can anyone provide some insight please?Here is the list.PTC Author LicensePTC Bom Transformation LicensePTC Contributor LicensePTC EBOM Management LicensePTC Ip protection licensePTC Manufacturing LicensePTC Mechanical Design I LicensePTC Mechanical Design II LicensePTC Project Management LicensePTC QUality License

Currently, where used tab only show the latest revisions of the parents.If a part was deleted from a parent, when I go to the where used tab, this parent doesn't appear, therefore I cannot find where belonged this component.I ask for the ability to show the iterations of parents where was used the part.

We have configured JMX alerts for queue status, file server status. But we need alerts with email subject having effected queue name, file server name. Similarly for alerts related to replica with site name .Please find the attachment”

Customer is frequently upload large size file along with documents created in Windchill, some of them may lager than 1G, and they are asking if windchill consider to support resume a file upload if one encounter failure, network shortage for example, in the future?