Community

I am using Mathcad Prime Release 11.0 and Datecode11.0.1.0The attached file crashes every time I change 'k'.Here are the errors that I facedNo warning. It just shuts itself down.

I was unable to create new local attributes even after running the AddColumns wt.part.WTPart String=1 query in the Windchill shell. Although the attribute columns were successfully added to the wt.part.WTPart table and the corresponding columns are visible in the database, the new local attributes are not being created still getting same old error “ A string attributes cannot be created because database columns of the following datatype are not available

I finally got permission and funding from Da Boss to go this year.  Who else is going?  If you are, want to schedule a meetup during one of the days?

Hello all,I use Schedule chart and I want to find a way how to expand/collapse several or all groups at the same time.Now, by default, it is possible to expand only one group (if I click on another group, the first one collapses).For example, if I click on LABEL-1 group, the detail opens, but if I click on LABEL-2 group, the detail opens for LABEL-2 group (while the detail for LABEL-1 group collapses). Please, find screenshots Is it possible to expand/collapse all or several groups at the same time?  

Back in 2012 I purchased a WF5.0 Student license. Since it is tied to the network adapter of the computer, I assigned it to a USB NIC so I could move to a new computer without requesting a new license file.While that did work for a long time, I recently started having problems with that network adapter disconnecting. (I used to remove it when I wasn’t using it to “protect it” and probably damaged a wire.)As I recall, when I moved the license from the original computer to the USB NIC, there was an email address I need to send my information to.Is that still the method to make this change, or is there another way to accomplish this task?If this is the method, can someone provide me the correct email address? 

I just had Creo 10.0.7.0 crash. Thankfully I was no longer in any models at the time of the crash. Just starting to open a file. When I restarted Creo, all the “Recent” files are not from today - I had just seen them and chose one when the crash occurred. Any thoughts?

In Creo assembly design, is it a good practice to first validate the concept using Layout, then define a Skeleton model, and finally create parts within the assembly using skeleton references?Does this approach help avoid assembly issues, or are there better recommended workflows?

Hi,How can we establish an SSO connection between Thingworx and Codebeamer? Thank you!

Hello,How to establish sso connection between Thingworx and Codebeamer using the integration connector?Do we have documentation or articles to achieve this?Any leads will be appreciated, thank you. 

Hello,I have tried to upload the mathcad file, but it does not allow me. The following was working in mathcad 15, but it does not evaluate in prime Thanks,Sam

Update:  The PTC Community is open for engagement.  We are temporarily operating on a pre-moderation mode: the Community team is reviewing your posts before publication while we are finalizing the platform for regular usage.  The idea portal will be restricted to voting and comments at this time.The Community New Idea submission functionality ideas will be launching soon on April 27th.Read more here We wanted to share some big news! Around April 6, we will be moving from our current Khoros Community Platform to the Gainsight Communities platform. Here’s what you need to know:  We’re excited about the careful integration of AI‑powered features that Gainsight offers to help community members—when they choose to use them—create meaningful, high‑quality posts. The Community Team will gain new in‑platform tools that allow us to deliver a more personalized experience for all community members.   We understand how important your community history and conversations are. Our technical migrati

I Create Perforatted sheet Design,Draw 4mm sq Shape and Corner in 1mm Radius,Using Direction Pattern X and Y, Regeneration process get Long Time Almost 6Hrs,How to Speed Up This Process?

We have a phantom item at the first level of the BOM that we do not want to publish as-is.The structure is:Parent → Phantom → Child partsIn Oracle, the expectation is:Parent → Child parts (phantom should be flattened)We are enabling one-level publishing only. Is it possible to generate the XML in such a way that the phantom is replaced with its child BOM (i.e., flatten the phantom during publishing)?I’m considering two approaches:Manually manipulating the XML, though this may be complex and error-prone due to multiple scenarios. Sending the BOM for phantom instead of phantom before generating the XML.Is there a better or recommended approach to achieve this?

While exporting the Structure BOM by selecting the “Multi Level BOM” option under the Reports tab, the BOM is currently exported with the report name followed by the Username and the current date. We would like to know if there is any possibility to export the file using the Number + Part Name instead.

HiI am trying to configure a 10.2 identical node type cluster with two nodes obviously one of which will be the active master.As per the Advanced Config Guide (http://support.ptc.com/WCMS/files/156979/en/WCAdvDeployGuide.pdf), the 2 properties that need to be set are:wt.rmi.server.hostname=Awt.cache.master.slaveHosts=B, C, DBoth these properties are set. But when I start Windchill, the MethodServer will start only on that node which is started first. For Ex. if I start Windchill on Node # 1 first, the Server Manager and the MethodServer both come up on it. But on node # 2 which is started after node # 1, only the Server Manager starts and never goes beyond the following line:INFO : wt.manager.CacheMasterNegotiator - Master stub retrieved: ServerManagerImpl$MasterServerManagerImpl_Stub[UnicastRef [liveRef: [endpoint:[xxxxxxx.xxxx.xxx:5002](remote),objID:[-2dd23186:148e7679245:-7ffd, -7282938796370177322]]]]No MethodServer on node # 2. If I go back to node # 1 and kill the Server Manager

We normally retrieve hole features from part files using Solid.ListFeaturesByType(false, (int)EpfcFeatureType.EpfcFEATTYPE_HOLE). However, this code doesn’t work for certain ISK part files and returns a null group value. Please explain, why the part file is returning a null group value?

We are currently planning for WTParts and we are trying to figure out how to manage attributes that are to be governed in SAP.  Our Current WorkflowFinished Goods (End Items) meetings are held to discuss necessary attributes to be entered into SAP   An Administrator fills out a spreadsheet with the required new finished goods. Sometimes there can be dozens of finished goods at once (even hundreds). The spreadsheet is sent to the SAP team for SAP import and part creation.Windchill Implementation AssumptionsWindchill/SAP Integration will be custom, 1 way (still to be developed) Some of the attributes for a Finished Good should not be managed in the WTPart, as they should be governed by SAP and any changes in SAP will cause a disconnect with the data in Windchill (due to the custom 1 way SAP Integration). We will be converting the current process from Excel and Email to Windchill. All attributes that were sent through Excel will be sent through Windchill. Windchill users will never want o

 Hello Community,I have tried to install ThingWorx and Windchill Navigate, but I am facing a few issues. Could you please help me? When I am redirected through the Windchill address I connected to, a Status Code: 500 Windchill error screen appears. I edited the Windchill wtproperties file, but it did not resolve the issue. ThingWorx opens successfully, but the ThingWorx Mashup Runtime displays a blank screen. What could be the reason for this, and how can I fix it?  

I’m currently using Creo 4 to test interference detection through VBAPI in C#. When I try to run the same code in Creo 11, the application launches and the working directory is set successfully, but I receive a 'pfcExceptions::XToolkitInvalidName' error at the line session.OpenFile(modelDesc1).Activate(); One more question: Does Creo 11 support rotating and zooming the assembly to capture the interference location?

In our internal company documentation, I was able to find 24 ideas that are no longer accessible under the previous URL.I’d have expected the migration team to set up a URL redirection so that users automatically land on the new page!Idea: Ability to copy component name from the assembly model tree Old URL: https://community.ptc.com/t5/Creo-Parametric-Ideas/Ability-to-copy-component-name-from-the-assembly-model-tree/idc-p/1043189 New URL: https://community.ptc.com/creo-parametric-ideas-180/ability-to-copy-component-name-from-the-assembly-model-tree-170254 Idea: Improve the Symbol Definition Interface Old URL: https://community.ptc.com/t5/Creo-Parametric-Ideas/Improve-the-Symbol-Definition-Interface/idc-p/1053730 New URL: https://community.ptc.com/creo-parametric-ideas-180/improve-the-symbol-definition-interface-169904 Idea: Start with CreoView Lite and if needed toggle to get MCAD without exiting the tool Old URL: https://community.ptc.com/t5/Creo-View-Illustrate-Schematics/Start-w

In the Traceability report, after applying filters, more than 95,000 items are available. However, the system currently allows selecting a maximum of 500 items at a time.To select more than 500 items, we would need to navigate through each page and clicking “select all” individually. With over 190 pages, this approach isn’t feasible.According to the PTC team, 500 items are the maximum limit of items allowed to be selected in this table view.Please refer below Resolution article.Resolution Article-Is it possible to view more than 500 Work Items in the Reference Linking screen in Codebeamer<https://www.ptc.com/en/support/article/CS449187>From the user’s perspective, Filtering returns over 95,000 items, making it impractical to navigate more than 190 pages and select them individually. The user strongly requests the ability to select all filtered results at once and wishes to have this functionality.