ALM

I would really like to have this question clarified, as the manual is not clear about it.   Imagine the following source setup:   We have some SI projects: /siteA/lineA/prodA/pro111/project.pj /siteA/lineA/prodA/pro222/project.pj /siteA/lineB/prodB/pro333/project.pj /siteB/lineB/prodC/pro444/project.pj /generic/pro666_forcedReview/project.pj     There shall be a policy for /generic (assuming that the policy is recurse to all proejcts below) that enforces CP review. There shall be a policy for /siteA  (assuming that the policy is recurse to all proejcts below) that does NOT enforce CP review.     When I share a member from (archive) lets say /generic/pro666_forcedReview/sub1/subSub2/aFile.txt   into /siteA/lineA/prodA/pro111/subForGenerics/project.pj   Will an update to this member from a sandbox of /siteA/lineA/prodA/pro111/ still be triggering a CP review???   If policies behave like ACLs I'd assume yes, but do they?    

I am extracting the descriptions of my Integrity test cases via web services (C#) and it works fine. The only problem is that the parameters are not substituted, they are written as {{myParam}} within the text.Is there a way to get the field contents with the real parameter values?

Hello Community,I have the task to integrate the PTC Integrity Test Objects with National Instruments NI TestStand. The recommended way of doing this seems to be the MKS/PTC ATEF Adapter. I have the documents around it, I understand the background to a certain extend (my Java knowledge is about 10 Years ago) but I am not sure if that is the right way of doing it. I wonder whether I did not find any hints about such an integration of the two systems, neither in the PTC community nor in the NI community.My Questions to all:Who uses the functionality of automated test execution (TestSessions) and putting the test results back to the Integrity Objects?What solution do you use?What test system do you use?Did you succeed with your test automation using the ATEF?What was your experience?Looking forward to your answersHarald

Hi,   Recently we have configured gateway to import content of document into Integrity. It workd perfect as expected. But our requirement is to import content of the table in to Integrity i.e each column should import to the specific field available in Integrity.   So kindly guide me with same xslt to read the content of the table into Integrity fields.   Thanks for your support. VSB  

The BSF for trigger scripts can be extended with Java, the classes have to be in "IntegrityServer/data/java/classes".Changes and additions are only visible to the script framework after the server ha been restarted.Is there a way to reload new and changed classes without a server restart?   Regards, Kai.  

Hi there,   First time on the forums, looking for some technical assistance.   I am trying to install the PTC Integrity 11 client by running the mksclient.exe   I get the following errors during the installation on our Windows 10 64-bit Enterprise OS:   I have to click OK in order for installation to continue to the end. It does install the PTC integrity client, but does not install the MKSToolkit component.   The screenshots reveal that the installation is failing on the toolkit64x.msi   If i try to run that msiexec.exe /qn /I "toolkit64x.msi" "TKROOTDIR=C:\Program Files\INTEGR~1\Toolkit" REBOOT=ReallySuppress in an elevated command prompt, it fails. If i remove the TKROOTDIR parameter altogether, the msi is able to successfully install individually.   Is there a solution so that everything can install successfully by running just mksclient.exe without the installation come to a halt? My company needs to automate this process by

Greetings,   I'm trying to make a query ,via the client, that will get me a list of segments whose children/grandchildren nodes got modified within a day.   Let's suppose I have documents like following : Parent : Requirement Document (ID : 1)  Child : Requirement (ID : 10) GrandChild : Requirement (ID : 100) and I need a query which will get me the parent documents'  ID only, which is 1 here, when his grand Children nodes (Id 100 here), or Children nodes (Id 10 here) got modified within 24 hours. (This Modification should include attaching new Files & deleting Attached Files)   It seems a query filtered-item.segment-and Modified Date in the last 1 days by following Contains   is getting me the the parent item only when his child got modified with in a day.   and another one filterned   -item.segment -and Modified Date in the last 1 days by following Contains (OR) -item.node -and Modified Date in the last 1 days by following

I've build which is checked-in on the PTC Integrity and I've raised the CR or SR ticket(Build & Deploy Request) on the PTC life manager by developer for deploy his build on some XXXX server and the version of the build is xxxx. As of now as a deployment team we are following the below process If we get a ticket we assigned it to us.And then collect all those details which is on the ticket by manually and doing deployment also by manually. Instead of this now we are planning to do this on automation. How do I get the following details on the Jenkins to do my deployment. I've some bat script to do the deployment. To kick off that bat file, it needs the following details1. Version of the build2. Which server the Build needs to deploy3. Where the build file is located I need to collect all those above details from the PTC ticket which I had created earlierIs there any possiblity from Jenkins can I able to get those values from the ticket number. I'm very new to PTC.I came to know from

In the last couple weeks we have starting seeing users unable to sign on the Integrity using Google Chrome.  We get an error 500 that the user name and password do not match the current session.   It works fine with IE and Firefox.    Any thoughts?

Hi All,   When I export requirement specification document I want its revision history as mentioned below: Revision Date Author Changes/Comments         or  Revision Doc. Date Author Description           I was looking to extract information from the history of a document and export it into a word document when exported. Because now if you see the history of a document in PTC Integrity has too much information even if we format small things like font it gets captured in history.   Is there any way how this could be done?    Thanks and Regards, Shilpa

Hello,   We have at office both Integrity  Client 10.8.0.8356 and Integrity  Client 11.0.0.506 (see attached image)   Both versions have a 32 bit JRE in "C:\Temp\IntegrityClient10.8_2\jre" and respectively "C:\Temp\IntegrityClient11.0\jre"   If I overwrite the JRE folder with a 64-bit version of Java, is it all right or not ?   So the question is: do  the PTC Integrity 11 and PTC Integrity 10.8 clients work with Java 64 bit runtime as well?        

Hello, I want to extract attachments by Java API.   I want to get all attachments(attachment, shared, text) of 1 item by single command.   The problem is that "cwd" option does not works for Java API, so only 1 selected attachment can be downloaded and I need to iterated over files (= iterating command).   In addition, I can not download "Shared Attachments", "Text Attachments" by Java API. I can only download "Attachments" of a single item.   Command cmd = new Command(Command.IM, "extractattachments"); cmd.addOption(new Option("issue", "312")); cmd.addOption(new FileOption("outputFile", downloadDirPath + "/attach.txt")); //cmd.addOption(new Option("cwd", "/working/directory")); // this does not work cmd.addSelection("attach.txt"); My question is that,   1. Is there a way to download all attachments of an selected item by Java API?   2. same as "Attachments" type is working, how can I download "Shared Attachments" and "Text Attachments" by J

Hi all,   I am investigating the option to create time entries in a trigger context.   Problem: - we want to use the time tracking feature provided by PTC, but we have strict limitations about the data that shall be visible to the users. Therefore we cannot just enable "time tracking" on our TASK types, as once enabled this would allow all TASK users to review the time entries of their colleagues. Only dedicated "time admin" users shall be allowed to do this.   Idea: I created a separate type "TIMESHEET" that has the time tracking enabled and is automatically generated with a 1:1 relationship to the TASK type. This TIMESHEET type is only visible to "time admin" users.   The TASK users shall enter their hours in a float field "time send today" inside the TASK item. A pre-event trigger reads that "time spend today" value from a TASKs IssueDeltaBean, and automatically creates an according TimeEntry in the related TIMESHEET item. The "time spend today" value&n

The Gateway Export (to Word) of a Test Protocol document with traced Requirement(s) for each of the Test Cases, through the "Verifes" trace relationship, works fine. It displays the Requirement item numbers, but when I attempt to retrieve a text field (DOORSID; set when imported from DOORS), I am unable to do so.   a) If I add "include-related="true"" for the "Verifies" field, will I be able to retrieve it?b) Can I use XPath (XML Path) to retrieve the DOORSID?c) Is there a way to view the "intermediary" XML file before Export to Word, to help troubleshoot the issue?   Balu

Greetings to whom it may concerns,   I want to get  sub-item lists of  several documents in the Integrity system, using MKS API. For being not able to find suitable options, I tried this.   Command cmd = new Command(Command.IM, "issues");cmd.addOption(new Option("queryDefinition", "(field[\"Document ID\" = 2])")); Response response = null;try { response = cmdRunner.execute(cmd); LOGGER.debug("reponse = " + response); LOGGER.debug(response.getCommandString());} catch (APIException e) { LOGGER.error(e.getResponse());}     And there are problems I'm aware of, with the command, that it shows sub-items of every documents in the system,  that it shows sub-items of one whose Document Id is 2, not lists from several document.  (modified) that it just shows all items in the system.  So, Here is my question,Is there any other command or options appropriate to in this situation? Any ideas or tips will be very hel

I know that getting detail information from a issue(Item) is   in CLI $ im view issue 2   in Java API Command cmd = new Command(Command.IM, "viewissue"); cmd.addSelection("2");   In result, I get the fields of the issue(item) that I selected. Shared Attachments: shared.txt Text Attachments: text.txt Attachments: attach.txt Not just names of the attachments, I want to know the detailed information of for each attachments (text.txt, attach.txt, share.txt...) such as created by and created time. I know that the detailed information of each attachments is shown in the GUI client when view detail of the item.   How can I retrieve those information by CLI and Java API?

Hello,in an open Document we add new line with the javascript trigger command createContent. This if special conditions are given. This is needed, because the users should not forget to add the new added "line". That works fine: ScriptIssueDeltaBean.createContent("category_name", "first"); but the users must manually press F5 to see the new line. And that is the problem: The refresh of the open document shoud happen automatically. Because the user shoud not forget this new line. Is there any way to do this?   Thanks a lot

I need to install a Linux-operating client on my system, which is Cent OS 7.4 64bit. I've read that Integrity Client supports RedHat 6, 64bit, so I thought it might work on mine as well. But I found the newest installers versioned Integrity-10-9-Client-Linux32.     Nevertheless, I've been trying to install 'Integrity-10-9-Client-Linux32' on the system, following '/ClientUserGuide_Integrity_10_9.pdf' guide documentation and 'https://www.ptc.com/en/support/article?n=CS124168'.   And now, I'm facing with another error messages when try launching the client, saying that  "./si: Attempt to launch Integrity Client timed out. To solve this please try the following:- Verify that the user you are logged in as has read and write permissions to the Integrity Client install directory."   I've found a similar issue, "https://community.ptc.com/t5/Integrity-Questions/Attempt-to-launch-MKS-Integrity-client-Timed-out/m-...", so I've double-checked my path '/home/

I want to create a report over my defects including the related test result verdicts and annotations per defect.   The goal is  e.g. to have a "defect log" showing all defects and all their regression test results.   I know how to access test results in report recipies using the according tags, but the problem is that, although the GUI shows me the related Tests Results in the Defect items view, the reports engine seems to unable to access these items via the tags , like <%begintestresultdetail verdict=&combinedverdictfilter %> <table> <tr> <%iteratetestresultfields%> <th>&testresultdisplayname</th> <%/iteratetestresultfields%> </tr>-- Display test result field values --> <tr> <%iteratetestresultfields%> <td>&testresultfieldname</td> <%/iteratetestresultfields%> </tr> </table> <%endtestresultdetail%>   If I run the same recipe on a Testcase item&n

I am new to Integrity.  I have version 11, Build 11.1.0.961, API Version 4.16.961.  I just want to create a document and start writing my specifications and requirements.  I am going through the eLearning and it keeps referring to Requirement Engineering Viewset but i don't see this view set in any of the viewsets that exist in the program

HI.I've just made a java program fetching files from Integrity CM system and it works good on the Window OS . But I've found it not working without operating the client program on the Linux OS, where the program will actually be running, and the client has not been installed on.So, here's my question. 1) Is there Any way of Creating/resynchronizing sandbox without Client, using API?   -I've been using localIntegrationPoint so far, for the system has sent me "Sandboxes cannot be created or imported directly on the Integrity Server." messages.   2) What should I do to install client on my linux OS?  -I'm not in charge of the Integrity system, so I got no clue what should I do. Should I tell the manager in charge to install the client on Linux?   Any ideas or tips will be helpful. Thanks in Advance.

Hi, we have set up a script that is triggered by the Member.unlockRevision.post event. It should send a mail if a user's lock is broken by admin. This works for "downgrade lock" from the sandbox and member history view, but not for the "Member/Locks/Find all locks for a certain user" view - the script is simply not triggered (we have no log output).   So this is only triggered when downgrading an exclusive lock - all other actions have to be done via "Member/Locks/Find all locks for a certain user" view.   We are on Integrity 10.5.   Is this known, corrected in a later version and is there a workaround?

Hi All,   I'm able to export the document using Integrity Gateway Export Wizard as required. But I wanted to edit  these export configuration options: Eg: Sample MS Word Exporter - simple headers and content to Header Content And also I want to add new options to this list.    I'm not able to find where exactly I can do these changes.   Thanks in advance.  Regards. Shilpa 

Hi all,   I know that Test Result has some limitations to improve performance but I don't remember if it's history is registred or not. Is it possible to view a Test Result History? The end user is questioning that he didn't change a Test Result but the 'Result Modified by' field is showing his name.   Regards.    

Hi! I want to export  a customized report and set up a XML and Word template. The report contains Test cases, which are linked to requirements. In the XML mapping, I load the requirement IDs with following code:   <field internal="Backward Relationship Test Issue" external="References" field-type="relationship" include-related="true" direction="out" /> Following, I want to access the underlying data, which is loaded with the flag ' include-related="true" '. But I did not find a way to achieve that. The report wizzard obviously loads the data, but I don't know, how to address these fields in order to have access in the docx template. I am only able to print the related ID's (stored in References), but not the data related to these IDs. I saw some questions in this forum asking the same, but no solution was provided. Can anybody have an idea how to access it? Thanks! Helmut