Archive Read Only

Hello Andreas, and thanks for the response.Unfortunately it did not work.I try to explain better, the api ChangeDirectory works well in that itsuccessfully moves the workdirectory in the new folder.However, if I do File \ Open menu, the OpenFileDialog always shows me theold workdirectory, it is as if not properly set the default path of thefolder. Its possible set this defaultpath ?

Neither http://ftp2.cocreate.com/software/Common/OSMPE/20/ModelingPE_2_0_setup_EN.exe nor ftp://ftp2.cocreate.com/software/Common/OSMPE/20/ModelingPE_2_0_setup_EN.exe work. Does anyone have a working link?

Hi,If you can share a power point presentation on the virtues of ProductView express, I would like to steal slides from it for use internally to promote ProductView Express at Midmark.Please post directly to the forum on this thread.Thanks!!!!Andrew AmsdenCAD\PDM AdministratorMidmark Corporation937-526-8770

Does anyone know of a way to determine the thicknesses of all geometryintersecting with a line? That is I would like to draw a line at a givenangle and see a report listing the component and the wall thickness (orthicknesses) of each component that the line passes through. Chris

I haven't used PE in a while but now I get a prompt for and activation code. If I request a code (I am regestered), I get sent to a page which has an invalid URL. (IE and Firefox) I can't even "re-install" via the download site. Help

I rescently downloaded the student edition of ProE. I download the two zipped files to my computer but I cannot unzip them... Any help on why or how I can fix this problem??

Hai I would like to know the definition for PRO-E.

on the cocreate product web page the presentation demos under Related Resources refer to the url: www.cocreate.com which results in 'server not found'. Is there a revised location for these?

I want to remove specific moves of the tool in a sequense. How can be done. Any help wil be apriciated. Thanks

Gurus,I want to do something that would seem common. I want to add a parameter to our parts that will populate the Description1 column in the metadata (not sure if thats the right thing to call it) area in Windchill. I tried using PTC_WM_Description1 but it says that parameter is already reserved. Thanks,James

Just loaded up the Cocreate PE version and have noticed that all circles are ellipse shaped. Squares are also off by the same ratio. Any suggestions on how to correct this.

I have someone at work that cannot use their scroll wheel to zoom. We have the setting on the buttons for the mouse correct to my knowledge and the driver for the mouse are ok. Anyone know of anything else to try in order to get this working?

It appears some users still saw C000, others saw F000 and couldn't download it, still others could see it and download it. I restarted my browser this morning and re-authenticated and now it is there, and am downloading (slowly) now. Thanks everyone, G. -- George Leonard,Space Systems/LoralT:408-372-7763F:650-852-7170

Dear all,Sorry for posting a non-Pro/E CAD related question - kindly bear withme:-). I wanted to the typical desktop 3D printers/small sized 3D printers thatyou use and their approximate costs. We currently get 3D parts done from outside shops & wanted to know thecosts of one having in house. Our prototypes (2-5 models/month,typically will fit in 10"X10"X10" envelope) are used for form/fit typestudies and would be subjected to water/liquid based testing such asflow rates, dispense rates etc. Hence they need to leak-proof. Also, theprototypes need to a smooth finish (SLA or Objet type & not FDM) so thatO-ring fitments can also be validated. Thank you for your responses in advance - I will post a summary. Regards,Jay

Sorry, having problems with email. Here is a picture of the revolve problem.Thanks again!David

HI everyone. Again an existencial doubt that i have. Since there a lot of softwares that can have a plane with an image, so we can use it as a reference, and "draw" over it... well i just wonder if we are able to do so in Pro-e? I mean, is there any way to use a brackground bitmap or reference image plane in pro-e. I understand it´s posible inside style tool, isn´t it? But is there any other way? Thank you very much, as usual.

I need to keep area constant, but able to change either d1 or d2 dimensions.Any ideas.thanks

Ciao raga, ho un problemino a caricare i files .pkg faccio un esempio così mi spiego meglio... - Creo una parte (un parallelepipedo 100x100x10 mm) nomino la parte ""parte1"" e lo salvo nel file di nome ""file1.pkg" - Con lo stesso file ""file1.pkg"" ancora in uso faccio delle modifiche (il parallelepipedo diventa 100x100x20 mm), lascio identico il nome della parte in ""parte1" ma lo salvo in un file diverso di nome ""file2.pkg" - Chiudo tutto e riavvio. - Apro ""file1.pkg"" e il solido è 100x100x10mm come dovrebbe essere. - Carico all'interno di ""file1.pkg"" il ""file2.pkg"" mi aspetto il solido 100x100x20 e invece il secondo solido caricato assume le stesse identiche dimensioni del primo, pur essendo separato dalla prima parte, ovviamente rinominata in ""parte1.1"" e mi crea una condivisione di parte. Anke se cambio nome parte o assegno loro un ""nome modello"" diverso nell'albero struttura è lo stesso... Sapete come fare per evitare questo problemino? Grazie mille a tutti...

Hello all,are there anyone using Pro Mechanica lite? Which is your opinion about his module? Is it something useful, or is it something that PTC "dropped" like Pro/Manikin?Thanks for your responses,Vassilis Anagnostopoulos

I have a plate sitting on top of two surfaces with a load applied to the top of the plate. I am trying to measure the displacement and stress on the two components holding the plate up. If I just mesh the model, it assumes the two pieces are bonded, which is incorrect. If I put rigid connections between some bolt holes on the parts and the plate, the plate flexes, but the load does not affect the other two parts. The same thing happens when I put interfaces between the contacting surfaces. Any ideas on how I can get my analysis to run correctly? Thanks.

Any ideas?

Good morning all,Is there a way to suppress geometry check errors you get whenopening/importing a neutral (stp, iges) file? Thanks,Matt Matt Gortner | Mechanical EngineerCHASEDESIGN, LLC1400 East Genesee Street | Skaneateles N.Y. 13152315.685.1000 (p) | 315.685.5021 (f) | www.chasedesign.net

Hi all, Does anyone have CAD model of Schroff's Minirack? (19" 12U, 780 depth).(with sliding trays and hinged doors) I will be really happy if early reply arrives..... Thanks & Regards, Jnanesha KS T 91-80-4119 0900 Ext: 466F 91-80-41190901M 994 500 4179- www.quest-global.com

Hello, I am a French technician (sorry for my English). I use Pro/E Wildfire 4.0 configured in Milimeters. I have 2 questions: Is it possible to draw in inch? (by modifying the configuration, I suppose ) If yes how do you write dimensions. For example how do you write on the keyboard 1'-5 1/4 "? Thanks Michel

All,I am looking for the proper format for an ".ibl" file. I have an array of points and I want to create a spline through those points and I cannot remember or find the correct format.I know that it looks something like:Begin SectionBegin Curvex1 y1 z1x2 y2 z2etc...What am I missing?????????? TIAWF4.0, M070Sincerely,Neal RosenblumGeometrix Engineering, Inc.201 N. 13th AvenueHollywood, FL 33019Ph:954-920-2049Fax: 954-920-9574Cell:954-649-9399<u>neal@geometrixeng.c</u>