Archive Read Only

Does anybody have a post for a 3000 on a Matsura

Does anyone know where I would be able to get models of the following threerifles?M16A1 - NSN 1005-00-073-9421M16A2 - NSN 1005-01-303-7493M4 - NSN 1005-01-231-0973These do not need to be detailed models but it is fine if they are.Thanks,Phillip BuckhannonJLG Industries, Inc.

I've created a UDF containing a couple of sketches that all haveparticular line styles (line font and color). When I place the UDF, thesketches are created but none of the line styles are consistent withwhat I had when I created the UDF. Is it possible to get a UDF tomaintain the line styles of the original features it was created from?Thanks,Tyler SmithCooper Tire & Rubber Company2025 Production Dr.Findlay, OH 45840419.427.4966 phone419.427.4907 faxPlease consider the environment before printing this email.

Hi all,I was just wondering if anybody has used FloEFD from Mentor Graphics fairly recently? Does the integration with Pro/E work OK? How is the meshing? How tight do the models have to be? How is the ease-of-use? Does it do well with electronics cooling, such as in a computer/server box?Anybody compare it with CFDesign from Blue Ridge?Thanks a bunch! Joshua HouserMCAD Tools AdministratorPelcoWorldwide Headquarters:3500 Pelco WayClovis, CA 93612-5699 USAPhone 559/292-1981North America 800/289-9100-www.pelco.com

I work with industrial designers and one thing I am constantly asked is to view the model in perspective. ProE allows this, but there are some incredibly annoying constraints. Instead of just having a perspective button, you have to set up the view and the camera often snaps way in so you can't see anything until you zoom back out. When you pan, zoom, or rotate, an annoying little eye appears in the screen. If you rotate around too much, the camera view becomes distorted and you have to go back to orthographic, then set up perspective again. If you use any other functions, the view snaps out of perspective and back to orthographic. Every other CAD software I have used allows you to set the view to perspective and leave it that way. This gives me a better idea of form in my models and is the way I would prefer to work. Is there a way to set up ProE to always be in perspective mode without all the annoying quirks listed above?

Since we upgraded to WF 4, it appears that dimmed tangent lines are not looking as expected....In "wireframe mode", they look dimmed. In "no hidden" mode, they look like the object lines.I installed the latest drivers (Quadro FX 3500)...Is there a setting we're missing?Thanks,GE Healthcare TechnologiesClinical SystemsMonitoring SolutionsEric R. SlottyMechanical Designer8200 W. Tower AvenueMilwaukee, WI 53223

Can anyone tell me if this is possible in Wildfire? I am looking to display symbols for the holes of the same diameter. A hole table (not like the standard hole table), would display a summaryof the diameter and quantity.

I have been asked to set up a Pro-E workstation for our China branch. I recently did this for a branch in the Netherlands by buying a workstation here in the states and loading 1 locked seat of Pro-E on it, running in english. The only problem I had was the power supply difference between the US and the Netherlands. Luckily the power supply on my workstation could be changed.I do not need PDM or WindchillI think they will want to run with Chinese menus. Will I be able to use the files they create just by opening in my Pro-e? Is it legal to send a pre-configured workstation with licensed software to a communist country?Any suggestions and/or experiences would be much appreciated. Of course I only get to the end of this week to figure it all out!!!Thanks in advance,Mike JohnsonSenior CAD DesignerCarlisle Industrial Brake812-334-8797<u>-</u> ***if you receive an attachment with extension .cib it is a zip file. Rename the extension to .zip to open***

Hello Andreas, and thanks for the response.Unfortunately it did not work.I try to explain better, the api ChangeDirectory works well in that itsuccessfully moves the workdirectory in the new folder.However, if I do File \ Open menu, the OpenFileDialog always shows me theold workdirectory, it is as if not properly set the default path of thefolder. Its possible set this defaultpath ?

Neither http://ftp2.cocreate.com/software/Common/OSMPE/20/ModelingPE_2_0_setup_EN.exe nor ftp://ftp2.cocreate.com/software/Common/OSMPE/20/ModelingPE_2_0_setup_EN.exe work. Does anyone have a working link?

Hi,If you can share a power point presentation on the virtues of ProductView express, I would like to steal slides from it for use internally to promote ProductView Express at Midmark.Please post directly to the forum on this thread.Thanks!!!!Andrew AmsdenCAD\PDM AdministratorMidmark Corporation937-526-8770

Does anyone know of a way to determine the thicknesses of all geometryintersecting with a line? That is I would like to draw a line at a givenangle and see a report listing the component and the wall thickness (orthicknesses) of each component that the line passes through. Chris

I haven't used PE in a while but now I get a prompt for and activation code. If I request a code (I am regestered), I get sent to a page which has an invalid URL. (IE and Firefox) I can't even "re-install" via the download site. Help

I rescently downloaded the student edition of ProE. I download the two zipped files to my computer but I cannot unzip them... Any help on why or how I can fix this problem??

Hai I would like to know the definition for PRO-E.

on the cocreate product web page the presentation demos under Related Resources refer to the url: www.cocreate.com which results in 'server not found'. Is there a revised location for these?

I want to remove specific moves of the tool in a sequense. How can be done. Any help wil be apriciated. Thanks

Gurus,I want to do something that would seem common. I want to add a parameter to our parts that will populate the Description1 column in the metadata (not sure if thats the right thing to call it) area in Windchill. I tried using PTC_WM_Description1 but it says that parameter is already reserved. Thanks,James

Just loaded up the Cocreate PE version and have noticed that all circles are ellipse shaped. Squares are also off by the same ratio. Any suggestions on how to correct this.

I have someone at work that cannot use their scroll wheel to zoom. We have the setting on the buttons for the mouse correct to my knowledge and the driver for the mouse are ok. Anyone know of anything else to try in order to get this working?

It appears some users still saw C000, others saw F000 and couldn't download it, still others could see it and download it. I restarted my browser this morning and re-authenticated and now it is there, and am downloading (slowly) now. Thanks everyone, G. -- George Leonard,Space Systems/LoralT:408-372-7763F:650-852-7170

Dear all,Sorry for posting a non-Pro/E CAD related question - kindly bear withme:-). I wanted to the typical desktop 3D printers/small sized 3D printers thatyou use and their approximate costs. We currently get 3D parts done from outside shops & wanted to know thecosts of one having in house. Our prototypes (2-5 models/month,typically will fit in 10"X10"X10" envelope) are used for form/fit typestudies and would be subjected to water/liquid based testing such asflow rates, dispense rates etc. Hence they need to leak-proof. Also, theprototypes need to a smooth finish (SLA or Objet type & not FDM) so thatO-ring fitments can also be validated. Thank you for your responses in advance - I will post a summary. Regards,Jay

Sorry, having problems with email. Here is a picture of the revolve problem.Thanks again!David

HI everyone. Again an existencial doubt that i have. Since there a lot of softwares that can have a plane with an image, so we can use it as a reference, and "draw" over it... well i just wonder if we are able to do so in Pro-e? I mean, is there any way to use a brackground bitmap or reference image plane in pro-e. I understand it´s posible inside style tool, isn´t it? But is there any other way? Thank you very much, as usual.

I need to keep area constant, but able to change either d1 or d2 dimensions.Any ideas.thanks