Archive Read Only

When creating an extrusion and entering a thickness value in the placement/options/properties box of .05 the system tells me that "You have entered a value .05 that is out of range (.174 to 1000000) click ok to correct..." it will not let me create a extrusion using I put in a value higher than .174.I can although create the extrusion with the default value (above .174) and change the dim to .05 and the extrusion will be created.Is there a setting somewhere that contols this or is something not set-up correctly.Thanks

Does anyone know if Pro-E can do this or has plans to support 3D XML anytimesoon ? I have never heard of 3D XML until I started a new project with aCatia client.http://www.3ds.com/flashgallery/discover-3d-xml/

OK, this should be simple, how do I turn on grids while in model. Robert ParsonsContract DesignerGilbarco 7300 Friendly Ave.Greensboro, NC. 27409Phone 336-547-5604 This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.

Pro Modelers,When drafting the end of a cylinder, I usually choose the edge as my draft hinge. Pro then picks the end of the edge as the draft point and invariably this is not the point I want, I suppose this is because Pro looks at a cylinder as two semicircles extruded. Short of putting in a tangential plane every time, is there any way to force the draft point to the middle of the edge?Your help is always appreciated,Richard A. Blacktel: 269 781-0539-http://www.automotive.eaton.com

Hello Gurus,I want to do copy geometry from one model into another model & remove the material of the smaller volume from the bigger model.when i tried to do the copy geometry I get the following message" Reference cannot be used due to the scope setting of NONE for Environment. "What does it means & can i get the procedure for how to do this.Your help is always appreciated, Thanks!Sridhar Nimmag GE Lighting Systems, Inc.3010 Spartanburg HighwayEast Flat Rock, NC 28726Phone: 828-693-2446Fax: 828-693-2184-

So how was everyone's 4th? I know this is off the topic, but I'm bored at lunch!

Good morning Sim,There is some disparity between a couple of resources over whether thedamping value on the Dynamic analysis UI is supposed to be input as a wholenumber (percentage) or a decimal (ie, 3 or 0.03 for 3 percent). Thediscussions I found here in the archives don't seem to address thisdirectly. The PTC KB indicates it is a percentage...a trusted resource hasheard decimal.Thanks in advance,Gavin B. Rumble, PESolid Engineering336-224-2312

Anyone out there have any experience editing Proe .mnu files (Wilfire)?I've done some in version 18, but it's been awhile. Brad Juchno Power Medical Interventions, Inc. 2021 Cabot Blvd. WestLanghorne, Pa. 19047 267-775-8105 267-775-8122 Fax bjuchno@pmi2.com www.pmi2.com <http: www.pmi2.com="/>Notice: This e-mail message, together with any attachments, containsinformation of Power Medical Interventions that may be confidential,proprietary copyrighted and/or legally privileged, and is intendedsolely for the use of the individual or entity named on this message. Ifyou are not the intended recipient, and have received this message inerror, please immediately return this by e-mail and then delete it.

Hello,I have to analyse strengh of a thank that is underground.It's completely contrained on concrete at it's bottom and it's stressed by the pressure of the ground (topsoil + water = 1.7 density).What kind of stress I must apply (constant pressure, force...) ?Can someone give me an idea or a link that explain how this should be set ?I know there are several methods to calculate soil pressure (Coulomb, Rankine...) but I don't know how to use them and I don't know what kind of soil it is.Perhaps I could calculate as a tank fixed in a liquid ?Thanks,GB

Hi every one,Here is a post and a follow-up I made on the draft forum. As no answer from my follow-up, I though I might give it a try here. Sorry if some of you are also on the draft list...Thx in advance,David

Thank you so much to all who responded, you guys and girls never cease toamaze me.Of course, I'd forgotten to resize the tablespaces before doing the import.It seems obvious now, probably a case of not seeing the wood for the trees.Once again, thank you so much.

gellis@woh.rr.com

Has anyone used both systems here? If so, please give me your opinion (good or bad) on either system.Thanks

Hello everyone,does not someone have 3D model of Grammer MSG 20 seat, openable in ProE?Grammer itself is not able provide me with this model because they startedmaking 3D since later seat models. There might be also whatever similar.Thank you in advance.J.VeselyAO-DELTA s.r.oCZ

I was on the right track... just had to use the FORMAT- TEXT STYLE menuin 2001... The trick was that you can't get to the segment of the notethru query select in order to use the RMB PROPERTIES or MOD TEXT STYLEfunctionality. I'll include samples of the replies as they differsomewhat... I'm thinking based on what version of Pro/E you are using: - Do it by using the modify font style instead of QS - You have the note changed correctly. I use this map key to select andmodify text style: mapkey ms @MAPKEY_LABELMod text Style;#MODIFY;#TEXT;#TEXT STYLE; - Put the P on a second line then change the font then re-edit and movethe line up. (this is for WF!) thanks to all...ORIGINAL POST:

Guru's A while back, I thought I read a post about having different text stylesin the same note and line, but now can't seem to get it to work, nor canI find the original post. I tried the following based on what I remember. What I have is a notethat reads{0:VIEW IN DIRECTION OF ARROW P}and I've change it to read{0:VIEW IN DIRECTION OF ARROW }{1:P}Now I'm trying to query select just the "P" portion in order to make ita larger font. Is this possible? Or did I misread something... thanks in advance... Paul Korenkiewicz FEV Engine Technology 4554 Glenmeade Auburn Hills, MI, 48326

looking for the proper syntax for pulling values out of analysis features into 3d notes. I know there is something tricky about it (since) trying a couple of quick trys didn't get it, but sure someone here knows quickly (syntax for proe stuff seems impossible to find in help.) Also if I'm doing this, will the 3d note have to be after the analysis in regen order for it to be "visible"?

How do you make Pro/E Wildfire 2.0 M180, Read: Adobe font type: Delta Jaeger Bold.pfm while in: Note Properties, Text Style, Charater,Font.Thanks DKL

Is there a way to have Multiple Lines of Text in a single Sketch? Example: * Improper use may cause a hazardous condition, etc. Thanks DKL

Hello everyone, To change the extension of the tap file (.tap) to adifferent extension (.nc) for example - Anyone knows where I can setthis up? Thanks THANH NGHICad SupervisorFirst Technology Innovative SolutionsPhone #: 734-254-1261Fax #: 734-451-9549

Hi Gurus out thereI have WF2, and loaded an STL file in a cad model.Now I need to create a set of section curve throught X, Y and/or Z plane. Any Ideas ?thanks a lotMilioni di oggetti, impossibile non trovare quello che cerchi.Dallo spillo all'elefante, non ti stupire.Sei su eBay!http://adfarm.mediaplex.com/ad/ck/724-7199-4110-179?id=2

What is with these lights in WF2 photorender. I am having a hard timegetting out of the dark. I turned on anbeint light and it is still dark.Douglas Bowles/Sr. Mechanical Designer[DKBowles & Assoc. Inc.] http://dkbowles.com/C/O Raytheon Missile Systems Co.Advanced Programs Dept.Bldg 808, Col. L3, K0257,phone 520.794-1935cell 520.490-9395

Are you using MVision for proe materials and other mil-specs? What is your experience with it? I am just trying to collect allpros/cons before getting into it.

The solution is to put @o in front of the line I want the leader attached to(that's a lower case letter O). LINE1{1:@o}LINE2LINE3 Thanks to Duane Poe, Michael Singer and Janet Grove for the correctsolution! Andy Burkewww.productview.com <http: www.productview.com="/>

Draft Pros, Since ptc.com is down, I am posting this simple one here for help . gettingtoo old to remember these details . not enough RAM, if you get my drift . I have a multi line note with a leader. By default, the leader is attachedto the first line. If I want the leader attached to a different line, I knowI can enter some text in front of the line I want it attached to . but I cannot remember what that special character/text is !? Any help is appreciated. Thanks, Andy Burkewww.productview.com <http: www.productview.com="/>