Archive Read Only

Original question :Subject: [model] Standard Holes & DOWEL holesIs anybody using standard holes for dowel holes ?? Standard holes aredriving by some thread, but dowel holes have no thread involved. How do youstandardize dowel holes ?Regards, Hugo.

Is anybody using standard holes for dowel holes ?? Standard holes aredriving by some thread, but dowel holes have no thread involved. How do youstandardize dowel holes ?Regards, Hugo.

Good morning, If there are any SAPplm folks reading the exploder please read on. I need totalk to someone ASAP who has expertise in implementing (incl. sizing, datamigration) SAPplm with CAD integration at a medium to large, global company(remote vaults). This is an exercise in understanding differentimplementation scenarios.Please call me immediately at the number below regarding implementation(hardware, software & services) questions. Thank you, Tracey John RohdeManager - Computer-Aided EngineeringGlobal CAD/CAM/PDM Systems SupportKohler Co. - PA EngineeringDirect: 920-4591784 920-457-4441 Ext. 71784Fax: 920-803-4850> Experience gracious living online at http://www.KOHLER.com> > >

I am triing to create multiple work offsets(G54 G55, etc.) in wildfire. Can anyone give me some help?Thanks for your help

Does anyone know of a good mechanical engineer w/Wildfire experience whomight be available for a long-term project in Portland, Oregon? I ammanaging a project and have just lost a great asset (retirement!!!) and amseeking an experienced resource. It would be for at least one year(contract to hire), near Portland (just South), and a great company andenvironment. If anyone has any recommendations, please email me. I'dprefer to find a resource myself rather than utilize a staffing agency (nooffense intended).Thanks!azad2323njefferson@azad.com800-406-1785

Hideho, How we modify the hole command (callout) to fit my company'sstandard.It's a pain to edit it and you lose to parametric qualities of the system.Using WildFire 2.0I'm glad your out there. There are only 2 of here that use Pro-E.Which by the way I find a excellent program. I've used Catia, AutoCad andPro is the best!!! Thanks.

All,Does anyone have any code that they could share that uses the APIPDMPIVsGetWhereUsedDependencies? I am having some trouble getting this toreturn some PIV's. Thanks.Patrick WilliamsApplications EngineerSteelcase Inc.

Hi folks, not a lot of responses, but the few I got pretty much said the same thing. The .hol file is where to edit the standard holes. This is edited with Notepad or another text editor. Pre WF2.0 releases do not have much you can edit, but WF2.0 has much more you can edit. Some people suggested that you could edit pretty much anything you would need to. Others suggested otherwise. I received some samples that were helpful. Thanks to those who responded. John Bettencourt

Hi All,Does anyone have #10 external star washer 3d Model? I tried to download fromthe vendors website (via Thomasregister.com) but there is some problem. Themodel available in pro/stuff. org doesn't work either. Is someone willing toshare the model with me? I am looking for #10 external tooth washer, 0.022" thick with 12 lobes.Thanks in advace,jaya

Greetings,I am trying to open a file *.catexp in Pro 2001 build 2002430. I have hadto modify file extensions before but can't seem to figure this one out. Ihave tried changing the file to *.ct with no success. Will Pro not openthis type of file? Any help would be appreciated.Thanks,Ian Coxicox@panelite.com

No one responded using SAP to manage Pro/E. Lots of interest from peopleseeking those who are using SAP. There is no summary.Tracey John Rohde Manager Global CAD/CAM Systems Kohler Co. 920-459-1784 http:\\www.kohler.com <http: www.kohler.com="/>

I’m inquiring about#1 - 3Dconnexion SpaceBall 5000 3D Controller (about $500)#2 - 3Dconnexion SpaceTraveler (about $600)Ideal feedback would be from those that have used both #1 & #2; I’m lookingfor what people prefer more than the other and why. I had a chance for acouple of hours at hands on workshop for wildfire 2.0 to use #2(SpaceTraveler). It felt comfortable and was a world of difference fromjust using the mouse. Buttons seemed like they might be hard to get usedto. So if any one that has used them could give me some feed back wouldgreatly appreciate it. Thanks. Eric FlemingEngineering Technician2881 East Bayard StreetSeneca Falls, NY 13148Phone: 315-568-4543Fax: 315-568-4507-

Hi All,Can anyone know how to introduce Optional Program stop(M01) OR M00 with in the NC Sequence.I have a patterned sequence for holes, and I want to check the Drills and Taps after each hole, but all holes make 1 sequence as its patterned.I tried with parameter END_STOP_CONDITION it gives me the G00 OR G01at the end of the full sequence..am I making some silly mistake?Please guide me .Thanks,Sukhesh

Is any one use SAP to manage Pro/E data? If so can you please tell me yourexperience? Good or bad doesn't matter. I just need to know if you using theintegration piece.Thanks.Tracey John RohdeManager - Computer-Aided EngineeringGlobal CAD/CAM/PDM Systems SupportKohler Co. - PA EngineeringDirect: 920-4591784 920-457-4441 Ext. 71784Fax: 920-803-4850> Experience gracious living online at http://www.KOHLER.com> > >

Hello all, I am new here. Please be patient my question. I do not know much aboutfluid dynamics. I would like to know if it is possible, within Pro/E, (or one of it'smodules) to creat a model sim of a crossflow plate heat exchanger thatwould allow me to measure the temperature of the air flowing through it. Daniel

Associates, I have a user who has encountered the following error: "cannot create inheritance". Can anyone shed any light on exactly what this message is trying to tell us so that I can formulate a corrective action? If you have any experience with this type of error I would appreciate hearing from you. Thanks.Dave

I uninstalled netscape accidentally and I just installed it back on mycomputer. However when I tried to use the Help Manu on Pro/E, it said"failed to locate netscape browser, help unavailable". Does anyone knowhow to fix this problem.Thank you!

Hi every bodyIs there any library parts created default in pro-e like the fastnerssrews bolts etc..So it would be easy to retrieve while doing . If it is available please let me knowThanks in advance.With RegardsT.Madhava Rao

Don't you think it would be easier if there was a pick in the RMB menu when your mouse is in the model tree? 5 picks to do something that is fairly common practice when you are examining someone else's model seems a no-brainer to move it to the RMB menu.Thanks again,Brian S. LynnCAD Administrator/Designer

I want to create a sin wave along a circular traj having 4 wave lenghts.How do I go about doing this. (ProE wildfire 1)

Does anyone know if there is a way to remove the "shared spaces" pickunder the folder browser in WF2? We don't intend to use the shared spaces/ Pro Collaborate option and I know users will click on it and be callingsaying it doesn't work.ThanksErik GiffordG.W. Lisk Co., Inc.