Archive Read Only

Hello, please tell me, how to reduce the object orientation speed?thanks

Hello PTC Community,In option dialog box – for ease of use, can you provide the extract location for the items?For example: choosing a template Template_solidpartClick browseUser need to choose the extract location (C:\Program Files\PTC\Creo 4.0\M010\Common Files\templates)In terms of doing this activity, we can purpose the automatic location.thanks bhoopathy

Hello,What are the ProE configuration options which control the size and the quality of the jpeg/tiff image created using ProEngineer.RegardsAwadhesh

図面上にて、"コスメティックねじ"表記 のエッジを"線消去" したいのですが、消去できない。 "エッジ表示" コマンドを実施しているが、対応できない。非表示の方法を教えてください。

Hello Users,I need to build a table for hex driver set screws with flat, cone, and conic bottoms.  Anyone know where I can download an existing file?ThanksChrisO

Sir, I have creo 2.0 in which I am not able to save model in JT format. Can you help me?

我的系統是win10 1703 64位，安裝的creo 3.0版本為: M110 64位,安裝完成后打開會藍屏死機，測試過creo 4.0是正常的 ，不知道是否有解決方法?

Morning AllThis weird! Had this error this morning and somehow it mystically cleared, now its back! Any ideas how to clear, it look OK to me.

Hi,What can I do with the animation if I want to create a .avi to see the movement inside?Can't find a way to show the section view with the animation module on.

I want to name a creo partfile in korean language. Is this supported??

Guru's, How do you set a text style to be a default style in a table? I amediting our revision block by inserting rows. When I insert a row thetext-style does not reflect (or copy) the row before it, but rather usesthe default text style at the time the table was created? Which would beokay except the justification is different from cell to cell. How do youtell the table to use a set text style when inserting new rows? By theway, I am not using repeat regions...just text.Using Wildfire 1.Thanks,Eric

Hello Sir/Madam,I would be glad if anyone could guide me through the download link. I am not getting a proper download link and I am not able to download the softwarePlease help asap

ValueChallengesBenefitsTipps & TricksLessons learnedPitfallsIdeas

Lessons learnedSharing Expertise

Discussion Thread on the upcoming European UDI-Regulationexpected challengesLessons learned from FDA UDI regulationsExperiencesKnowledge Sharing

I'm back using wildefire 4 M220, I am struggling to remember how to change a table from descending to ascending, any help??

You know, it's an "engraved text on a cylinder"FROM A WRAP That should be obvious since a simple "project" doesn't work properly on a cylinder.The knowledge base has led me to a ridiculously complicated routine involving projecting and selecting in an absurdly complicated process.I really should add that it doesn't work either.Is this really the best we can do at this point?

First time posting...I have turned on the dual dimensions, inch as primary and metric as secondary...when set as ISO tol display and secondary units below, I am getting an overlap when dims aren't nominal. Any idea on how to fix this? Thanks in advance!

ew

Bonjour à tous,Je viens de récupérer une pièce et une des fonctions m'est incompréhensible..Explication :Quand je reprend la fonction en question en mode esquisse. La cote affichée est 9.1Quand je reviens en mode 3d et que j'édite la propriété de la cote, Creo m'affiche 9 +0.2 / 0Question :Comment est-ce possible d'avoir une transformation de la cote non centrée en mode 3D en cote centrée pour l'esquisse ??

So, we recently had a user that receive a new workstation (HP Z440) with up-to-date drivers and BIOS and a factory installed AMD FirePro W2100 GPU, which was later replaced with an NVIDIA NVS 510 2GB GFX GPU.  Since the new graphics card was installed, the user is not able to work with large components without encountering lag and pixilation of the on-screen image.I was wondering if anyone has ever experienced this or has any ideas on what could be wrong?Any advice would be appreciated.

Has anyone come across user manual or any help file of pro program?RegardsKetan

Morning AllCould somebody have a look at the attached model and help me to understand the merge error. I've tried several iterations of this and I cannot clear this.Many Thanks.

hai friends thanks in adwance how can i get weight multiplication with quantity. can anybody help? index description qty weight weight*qty 1 xxxxx 2 50 100 2 yyyyy 3 20 60

Hello to all Creo User,Hello Tom Uminn‌, Martin Hanak‌could anybody tell me how i can change the "_" underline into "." a point?My Problem is, i want to show the "PTC_MATERIAL NAME" in a notification, but this parameter accepted only "_" underline in the label / Name.The real materialnumber is: 1.0037The label from the PTC_MATERIAL_NAME is: 1_0037How can i extract this either in a new custom parameter or directly into a notification?Thanks in advanceHeiko