Archive Read Only

How to shift entire column text details into other column?Is there any facility realted to this?

Where can I get renders/models of common parts like screws, bolts, nuts, etc? As well as electrical parts like terminal blocks for example?

I have created 3d model in Auto desk 123d Catch, I imported that model in Pro-e which was in Stl format. I am unable to process it i.e I can not perform operations like Merge, Extrude,etc.. I have uploaded the model in Stl formet, please help me

how to get cloud point data of imported stl model in pro e

Hi everyone,Do you know what PTC tool is available to read old .des files made with Pro/Desktop Express 2001 ?Thanks

Okay...I know this is the CAD forum...not the rant section....but I cannot hold it back any longer. The new draft analysis is truly horrible. Slow, cumbersome, un-imformative and a PAIN to use.PTC,I know I can "save" an analysis....but I simply don't want it required of me to do that to have functionality that used to exist and worked fine previously.end rant.

Hi, I'm trying to put the bend allowances of our sheet metals in a bend table Pro/E, but I'm confused about the help files. It's clear to me that for an angle of 90 degrees, the standard conversion formula would be: L=2*(T+R)-A (where A = allowance) But for angles below 90 degrees, my guess would be that the conversion formula would be: L=2*(T+R)*tan(ANG/2)-A Am I missing the point of the conversion formula, or is my formula right and is the help incomplete?? See http://downloads.neoposttechnologies.nl/neopost5/bend_allowance.jpg Am I using the right dimensions for x and y here?? Thank you for any clues! Kind regards, Jaap Kramer

How are people creating gears (true gears) in Creo?Preferably a free way, and not a purchased package.thanks!

Hi I have been using creo 2.0 for the last 6 months and i have been facing this problem regularly. As shown in the image i am not able to move the annotation 18 horizontally. Any help in this regard will be appreciated

So I cannot get my colored transparencies to show up correctly on my computer.I'm running Creo 2.0 M090 with the newest AMD FirePro driver set (13.152.4) as of 01/20/14. The card is a FirePro V7900.I recently stumbled upon OIT and really like the potential performance upgrade I could get. But all my colored transparencies show up as clear. Meaning I have a really crappy view and it's hard to distinguish different transparent surfaces.I saw SPR 2140668 and what appeared to be a fix back in M010 but apparently that doesn't apply now?Anyone else having this problem or know how I could fix it?

I hear some people use a sequence of 10 or so done/return/ok's in a mapkey, just to make sure they don't get interrupted. How does one make such a mapkey, so it will work in a bunch of other mapkey?

Hello, Is there now in Creo 2, a simple way to calculate the internal volume of a shape, without going through the Shopsystems brush marks as described in the knowledge base. Cordially. Denis

Hi to everyone.I am a totally new member on this community and i also be a novice user of creo,so i face a problem.I'm interested in creating a trumpet model but its been a long time since i stop using creo and i've almost forget the majority of the commands so i will ask for your help in order to suggest which commands suits to this project.I believe that if you propose me the basics commands for a trumpet model i will gradually create it.Notice that the model is planned for a toy for example so i dont want to create a realistic trumpet full of details but something like this Thanks in advance.

Hello,   Does anybody knows what's COOL_PITCH parameter for? It doesn't appear in any feature when placing a cooling component.   You can find this parameter in the "bore_cooling.cfg" file, from the "configuration" folder.   Thanks! Ana Felizardo

We are trying to get LGR to work in Creo 2 Parameteric M050 and M090 tied to PDMLink 10.1 M040. We have followed the documentation provided by the local PTC rep who we have worked with for many years. We can it it to work with the files saved locally but not tied to PDMLink.I am able to spin and zoom on the thumbnail in PDMLink, but when we open a file using LGR in Creo, we get outlined boxes representing the parts and subassemblies.Does anyone have any suggestions?Lance Lie

Hey, we can trim this down somewhere to store downloaded at least restarting Crea again returns to its original value?

Anyone have some advanced GUI construction techniques to share? Here's some code we use to generate a dynamic radio button list on the fly by writing a .tab file in realtime and calling it:GET_WORKING_DIRECTORY myWorkDirFOR connectionSizeValue REF ARRAY connectionSizeValuesELSE FILE_OPEN myWorkDir+"fc_gui.tab" "w" myGuiFileFILE_WRITE_LINE myGuiFile "BEGIN_GUI_DESCR"FILE_WRITE_LINE myGuiFile "\tRADIOBUTTON_PARAM INTEGER CONNECTION_SIZE "+guiOptionsFILE_WRITE_LINE myGuiFile "END_GUI_DESCR\n"FILE_WRITE_LINE myGuiFile "BEGIN_ASM_DESCR"FILE_WRITE_LINE myGuiFile "\tCONFIG_ELEM"FILE_WRITE_LINE myGuiFile "END_ASM_DESCR\n"FILE_CLOSE myGuiFileFILE_OPEN myWorkDir+"sel_list.txt" "w" myFileFILE_WRITE_LINE myFile "fc_gui udf"FILE_CLOSE myFileguiOptions = "CALL_EX myWorkDir+"fc_gui.tab" --Geoff

Is it possible to create a blocks for cllection of abjects in pro e detailing like we could do in Autocad ?

Hi everyone,I recently try to show colored surfaces of a model into a draw in order to show milled surfaces.The fact is I did not managed to do it, even with the option "color from model".Can somebody can help me with this problem please?I actually work with Creo 1.0

Hi all,I'm designing a Formula Student chassis as a final year project to be used at next years event. However, I have come across a problem. Using a discussion I found on here from April 2013, I have managed to add the tubing as per the event rules, but it said that it was only for straight tubes. Is there any way of bending customised tubes to be used for the roll hoops, or is it a matter of just using the closest existing tube?Thanks a lot,Tim

My name is Nithin Manohar I am studying ME Deign Engineering in Bits Pilani, Hyd Campus, I Have a dought Is it posible to convert 2-D Dicom Format image to 3-D object using Creo Parametric help me.Thanks in advance

from "out of the box". There is a limited capability with the standard functions.Thanks

Hi   all works fine only when i crate pin won't create pin hole. it assembly only pin but wont create hole. wher it is the catch.   Regads.   t

Happy new year to every one my 1st question in this year, Is it possible to find the Center of gravity of 3d object using Creo parametric 2.0, If it possible tell me how to calculate it?Thanks in advance

Is there any way to add a tab to the Ribbon or Quick Access Toolbar that will alway display regardless of the context?We just started using Creo and trying to customize the menus. It looks there is a completely different ribbon for every application. We would like to add some commands one time and be able to see it in the menus choices no matter what file we open.( I would like to meet the person(s) at PTC that thought the microsoft office ribbon would be a good idea to implement in ProE. I would just like to give them a good punch in the face.)