Augmented Reality

Hello everyone I wanted that when any model item gets clicked it's colour should change and as well as some labels and image should be displayed. But I am going through some problems.  Problem 1: In preview when I single click model Item only labels and image gets displayed but when i double click it, colour of model item changes and label and image gets displayed. I want to convert this double click into single click mechanism.   Problem 2: During experience after double clicking on model item, labels and image gets dissapear but colour does not get back to normal. I want colour should also get back to normal.    I have attached my project. Also I don't know much of coding.     

Hi, After a PC rebuild, I had to reinstall the full suite of AR related software. Installed Vuforia Studio and had the foresight to save the project folder from the previous installation prior to rebuild. Re installed the Project folders and all looked well in Studio. Some Experiences contain buttons with PNG images which worked well prior to the rebuild, but noticed that when trying to view the Experience with a HoloLens, instead of the buttons triggering the rest of the functionality in the Experience, the model would just temporarily glow green and nothing else would happen.  Long story short, when billboarding was removed from the buttons, the Experience triggered the functions perfectly. As a test, I reapplied the billboarding, republished and the fault issue reoccured. Has anyone else experienced (pun intended) this issue? Using the latest version of Vuforia Studio and View. Using PTC Cloud for the Experience Service.   Regards, Brian    

I have 9 buttons to play each animation(i.e step 1 to 9 in sequence) . i dont want the animation to sync out when one touches next button . i dont want that button to operate anything till previous animation is finished. I have gone through the below link    https://community.ptc.com/t5/Vuforia-Studio/How-to-disable-playback-until-a-step-has-finished-playing/m-p/516794   but i need a java script to perform that operation.   are there any ways to do so?    

I want to give glow and dim effect to button and once button is clicked the button turn to some static colour. can i do so?

Hi all,   Is it possible to take panel and button elements and have them slide offscreen/destroyed when I click on a button? I am trying to have a button that turns off parts of the UI. Ideally this would be similar to how the header's hamburger button make a panel slide into view from the left side. Instead, I would like for it to slide up and down from the bottom. Is this possible and how would I go about creating this?   Are CSS Animations supported, and while we're at it, can I use things like the html div tags as well?   Thanks, Wes

Actually I want to place some buttons at the bottom of screen and I want that when i choose 'suspension assembly' some specific buttons should be displayed and when I choose other option such as 'arm assembly' some other buttons  should be displayed and the previous one should hide.   Also when i switch window, operation done by the previous button should be disabled. I am not from coding background so it will be of great help if anyone can provide code for it.

I want to change the buttons to be used according to the selection i made in select widget. Any idea how can i achieve it? Also I am not comfortable with coding so a code according to my project will help me lot.  I am also attaching the exported project file.

Hi folks. How to you deal with internationalization?Is there sometihng planned by ptc?Do you have custom implementations? Or external libs in use?   Greets.

Been using Vuforia studio for about 2 months now.  Not sure if it is trial or not.  Yesterday, logged in no problem.  Later in the day an error occurred when try to save a project.  Closed application.  Haven't been able to log in since.  See log files attached.  First from early in the day.  Second showing error at login

Hi community.   I have some issues with the styling of a chekbox. In studio and preview the styling of the checkbox is just as it should be. I'm using just the standard, not changing anything with css. But in the Vuforia View app the styling is different, as if there are no css applied. That's just the case with the checkboxes, any other widget is working as it should.   I use Windows 10 with both, the studio and the view app.   Someone has the same problem? Or an idea?   See the uploaded screenshot.    

I am using a 2D select widget to control the sequence being played.  I would like to be able to display different 3D images based on this selection.

Hello, I would like to check if app/resources/IMAGES/Filename.JPG exists or not, and then display scrolling arrows (left and right) if multiple images exist. I can figure out the scrolling arrows, and how to change the 3D image widget, but I can't find a way to check if JPG files are uploaded. I display a different image for each step of an animation, but some steps will have multiple images associated with them.   I have tried Stack Overflow: Check synchronously if file/directory exists in Node.js but I get the error in my console "TypeError: Cannot read property 'access' of undefined"   var name = // code I use to concatenate a filename string ending in .jpg var p = "app/resources/IMAGES/"+name; fs.access(p, error => { if (!error) { console.log("exists: "+p); } else { console.log("does not exist: "+p); } Any suggestions? Thanks

Hello, I´m Eder Reguera (PTC partner), I don´t have access to vuforia studio trial, can any help me to restore the trial access? Thanks

Hii allI want to add link to the toggle button so that it can directly jump to the pdf while pressing the button.Let me know any suitable optionsThank you

 Hello,   I have created a sequence with assembly procedures and it works well in illustrate and is saved to PVZ. But when the same model is loaded and sequence is run in Studio, the Sequence procedure acts weird ( the components which need to be assembled are called in ( or Fade IN ) from an exploded position and are supposed to take the SBOM location  but the issue I am facing is that the component first highlights itself in the SBOM position ( Not intended ) and then starts to move in to the SBOM location.Am I missing something here?   Avinash

Does one plus 6 or one plus 7 pro support spatial tracking?

Hi There.  I have been having this issue in Vuforia Studio where the spatial target is picking up the ground plane, showing where the model "would" go, saying "tap to place" under the model. I try to place the object but it does click. My first thought was that the model was too big, so i scaled it down to 10%, but it still didn't place. I checked my app to make sure it was the current version on both the PC and mobile device. Please let me know what to try next!   ~Thanks

Hi there,   If I start Creo Illustrate i have to enter a licenseserver. Where do I find the License Server? What information do I have to enter?   Thanks for help.

Is there a way we can use the animation created for FBX in PTC studio? As far I know we can only use creo created sequences. How use animations from FBX?

I try to access a pdf file, or a mp4 video file, trough a link-widget. It works in preview mode on my notebook and on the tablet, but not in the Vuforia View App.  I'm using an Windows 10 Tablet with the Vuforia View App, and when I click on either the pdf-link or the video-link in the app I get an Windows 10 popup with text "You need a new app to open this ms-local-stream" Someone has an idea how to fix this?

Vuforia Studio Bug fixes and minor improvements Vuforia View Bug fixes and minor improvements Experience Service  An 8.4.7 version of Experience Service was not released  

Vuforia Editor Bug fixes and minor improvements Vuforia  Capture Ability to lock the menu at a specific location in your environment (HoloLens only) Bug fixes and minor improvements Vuforia View Ability to download a procedure for offline viewing Bug fixes and minor improvements Vuforia Admin Center Ability to assign a user a role (Administrators, Developers) when inviting them to an organization Link to Vuforia Expect Capture Success Path available form top-level menu Bug fixes and minor improvements

Hi there,I am working on a demonstration and there is a 3D model containing 2 - 3 sequences.I knew that I can use the select widget to choose the target sequence, but I would prefer play different sequence by clicking buttons for a better trial experience.For example, if I click button A, the first sequence is played. Likewise, if I click button B, another sequence will be played.Is there any way to perform such function in Vuforia Studio? Or can I do that through writing a script?

Hi,   I have just started for on-premises vuforia experience server creation, as per help doc before starting installation third party softwares must be installed. So i have installed c shell, node.js and now installing Mesa 3D Graphics Library.   I have successfully installed c shell and node.js but facing some problem to Mesa 3D Graphics library. I run below command as , sudo add-apt-repository ppa:ubuntu-x-swat/updates sudo apt-get dist-upgrade and after that trying to check with command glxinfo by below command glxinfo | grep "OpenGL version" but it shows me error as   Error: unable to open display    So please can some-one suggest, and is Mesa 3D Graphics library installed only for installation with GUI or having any other purpose.   Note: i am using ubuntu 18.04 server.   Thanks, Prashant Pandarkar

Can any one tell me how to create pages in Vuforia studio.As it should step by step. 1)Welcome page 2)Experience  3)sample models 4)Thank you note