Community

The table in .drw is not updating if I change .frm save and reload. Somrthing in .drw is not updating to see latest format file. SEE IMAGE of .frm and .drwChange in .frm [B TO C]Upadte in .drw still show B

Hi,I am new to this Creo composites module, i would like to seek your help on few queries related to composites.1. While we add multiple Ply on a model, how can we change the sequence when we are trimming the ply based on my requirements. Currently the ply sequence is opposite from my expectations. Attached image for your reference.2. How do we understand what is wrong when we see the Drape status as can't able to drape in drape manager window? What should be corrected? how to analyze?3. Can we manage the length of the ply manually? likewise while we apply the first ply we should be able to manage the length or key in the length value? is this possible? ThanksNaresh

Hello,I did some research on ThingWorx Analytics, but most information I found is quite outdated — the latest updates seem to be from around 2020. In our company we use the ThingWorx platform and we would like to implement some AI-based enhancements for our condition monitoring.I still have a few unanswered questions:Are there any recent updates regarding neural networks or the overall capabilities of this product?What are the requirements for implementing it into our existing ThingWorx platform? (For example, a specific platform version or any additional components needed?)How much information can it use when building a high‑quality neural network?For example: I have raw machine data such as position, temperature, vibration, RPM etc. — the standard numerical data.But I also want to use maintenance data (interval maintenance) and fault data (annotated in historical datasets for learn the neural network how data looks like when these events occur). These types of data can also be non‑nu

Hello, I’m having an issue in Creo Drawing:When I select a dimension and go to the Tolerance tab, all options (General, Shaft, Hole) are greyed out/uneditable.I have already enabled tolerances in the model properties.I have already retrieved ISO tolerance tables.The dimension is not a reference or driven dimension.Curiously, some drawings work fine, and their Tolerance tab is fully editable.Has anyone encountered this? How can I enable the Tolerance tab to edit tolerances in drawing dimensions?Thank you!

Hello,We have some problems trying to convert .cgm files to .emf format with Isodraw v7.1 M090Actually we work with a floating license from different computers. The problem ocurs when we export the same input file from two different computers:-The result from one of them is correct-The result from the other computer is not correct because it adds some blank space on the right side and also on the lower side.We assume that there is some kind of different configuration in both computers but we cannot locate it after many searches...Is there any configuration parameter that we can review so all our computers get the same result? or is it possible to send you an image so you can see the the difference?Thank you for your help.

Hello Guys:  The Codebeamer version I am running is 2.2.0.0 ,and I'm trying to integrate CB with Jenkins  by xUnitUploader plug-in (v1.1.4) .However,there are some errors during  set up..Does somebody know why the errors occur ?Is it possible due to the version conflict between CB and  xUnitUploader plug-in ? Will appreciate if any feedbacks and responses ... 

I can connect to my Engel IMM via UA Expert, but I am unable to find the information to make the same connection via Kepware Server.  Where can I find the information or can someone provide me the information.

im a begginer and im having trouble making a cooling vent on a revolved surface ... i could just sketch the all the shape on one quarter ( mirror after ) then project it and maybe use punch or something like that to get the slots , but it seems like too much work and not really the smart thing to do , is there any other way i could do this ? not only the patterining it self is a problem but also having the pattern not cross the 120 diamter circle and the smaller circle ( the one with the hole ) , the modle comes from an exam question at the uni im learining at ... im using creo 10.9 thanks a lot 

Hi everyone, I'm doing this creo excercise and amquite confused seeing how the tutorial video handled this part of the drawing.tia!link to the video I'm referencing: https://www.youtube.com/watch?v=ssI7dJEkdys

I am using Creo Parametric Release 10.0 and Datecode10.0.5.0Creo 1.0.5.0 failed to register windchill 13.01 server.When registering a WIndchill Server in the File Server Management it will not connect after selecting check. User and Password are correct. URL is correct.Here are the errors that I facedWIndchill Authentication Failed

How to modify this symbol? I want to change value of  2 PL to .01 

Version: Windchill 13.0 Use Case: We would like to have some automation to our Windchill installations, so we were thinking about Terraform and Ansible. Does anyone have any previous experience with this setup and any example that can be shared?Description: We would like to know how the Ansible playbook would look like and how the installer would be called.

I was trying to convert a mathcad 15 file to mathcad prime 9, but I get an error in solving for this variable I placed all my guess values and constraints but it still does not work. Refer to the pictures with the solve block and how it was performed in mathcad 15.Mathcad 15 how it was performedMathcad prime 9.0 error in solve block 

Hi all,Having a little trouble getting a threshold transform property to work. My goal in this example is to count how many of the last two property values are above the threshold. The data is changing to above the threshold but the transform is not occurring. Anyone familiar with how this specific transform works? Was able to get other simple ones like mean to work easily. 

I have a requirements tracker that has two specific fields I want to create a report based on. Once Choice field (1) Software Related with Options: Yes or No. Second Choice field (2) Devices with Options: Device1, Device 2, Device 3.. etc. It is a choice field allowing multiple options selected. In my report I want to List the requirements with Choice Field Software Related = Yes, Group By Devices but omit device 4 from the list. Is this Possible

There is an item whose description is set to the string “12345-67890-12345”.When I search using the filter Description: like %12345%, the item is found.However, when I use the filter Description: like %12345-%, the item is not found.Could you please tell me how to search for strings that include a hyphen (“-”)? Best regardsIwao Fukushima

Hello,I have a cross section of a radial pump rotor with radiuses which I want to annotate the standard way with arrow and ''R8'' written for radius of 8 mm.  I can do that to other curvatures, but not to to the surfaces made by  feature ''round'' that are made on vane endings.  I tried with ''show model annotations'' but there I can find these annotations being scattered elswhere to unwanted positions. Can not move them to cross section by ''edit attachment''. Whenever I click the curve that represents cross section of a round to insert ''dimension'' nothing happens- no dimension is written and no arrow shown. Same happens for any other similarly created rounds in this cross section. Despite round being defined as round of 8 mm, I can not measure it with ''measure'' tool. What is the way to annotate such rounds on cross sections while keeping them dependant on radius defined in ''round'' feature? Best regards!     

Hello All, I’m trying to simulate torque applied to a ¼” hexagonal driver to a reduced A/F set screw. I have set the simulation up but getting very high stresses in the results. My question is does applying the ‘total load at point’ effectively divide the moment load by 6 in this case, the point created is at the centre of the hex? Due to the stress reported I suspect I may have to divide the torque value by 6 manually when setting the load up?

Hi Community,   I am using the WebFrame widget in a ThingWorx Mashup to display PDF files. On desktop browsers it works completely fine — I can scroll through and see all pages of the PDF.   However, on the iPad, if I open a PDF that has more than one page, only the first page is displayed. When I scroll down, no further pages are shown (it looks like the PDF is cut off).   Has anyone faced this issue before? Is there any workaround / configuration needed to properly display multipage PDFs on iPads?   I have already tried different browsers on ipad. result is same. Thanks in advance for your help!

Hello all! I am reverse engineering radial pump rotor. I want to achieve a constant radius between pump vane and the ''casing'' - as if it is a ''round'', that fails if I try generating because of complex edge and surfaces. So basically I am asking for help/advice/past experience with how to make complex ''round'' feature on spiral-like intersection of two curved surfaces. I did it before with ''solidify'' of created quilts -but they were uneven and hard to change if I wanted different and constant radius along the intersection.   Thank you!

Please provide clarifications about the error code MKS6188819What exactly command line option should I use ? Please help. Thank you very much.The operation could not complete because the working file size exceeds the Server working file size governor.Use the Add Member From Archive command to re-add the archive, followed by the Check In command with theConvert Archive to Reference  on Governor option set to check in the working fileWe are using Windchill RV&S 13.2.0.3Pleas see the attached image

Hi everyone,I’m working in Windchill with parts and drawings stored in my workspace. I’ve generated the drawing PDFs, and now I’d like to link all related information—such as design calculations, supporting documents, and relevant email correspondence—to the specific part in Windchill.The goal is to have a complete design history or data package for each part, similar to how it’s managed in Teamcenter, where all associated files and communication are traceable and connected to the part.What is the best way to achieve this in Windchill?Is there a recommended workflow or structure to ensure everything stays linked and easily accessible later?Any guidance or best practices would be greatly appreciated!Thanks,

Hello, Right now a supplier is using Creo elements direct modeling latest version and they create annotations drawing files and send .bd2 files to us. I wanted to ask if there was a way for us to open it or convert it without having to turn it into a neutral file? We tried step file but my issue is when it comes to Creo Parametric the models are broken? Is there no direct way to address this? Thank you. 

Hi everyone,I’m working with Creo 11 and trying to use the APIs ProDrawingViewDetailCreate and ProDrawingViewPartialVisibleAreaGet, both of which require a ref_point of type ProSelection. I’m facing consistent “bad input” errors and would appreciate any guidance from someone who has successfully implemented these.Here’s what I’ve tried so far:Method 1: Programmatic datum point creationCreated a datum point → SuccessUsed ProPointInit → SuccessConverted using ProPointToGeomitem and Modelitem APIs → SuccessAttempted ProSelectionAlloc() → Failed to return a valid ProSelectionMethod 2: Manual selection approachCreated a datum pointSelected the point using ProSelection → SuccessPassed this selection to ProDrawingViewDetailCreate & ProDrawingViewPartialVisibleAreaGet → Both failed with “bad inputs”Method 3: Drawing entity approachCreated a point in the drawing using ProDtlEntityCreateUsed ProSelectionAlloc() → SuccessPassed it to ProDrawingViewDetailCreate & ProDrawingViewPartialVisib

Hello PTC Community. I am posting a Mathcad Prime 11.0.1.0 worksheet wherein I am evaluating certain quantities by performing element-wise multiplication and division of column vector variables. I believe that I am not doing this right.Your help will be appreciated.In MATLAB, it is .* & ./ for element-wise multiplication and division, respectively.Both the attached Mathcad & Excel sheets work together. Thank you for your assistance.