Community

I'm using WRITECSV to write the contents of a matrix to a .CSV file. The WRITECSV function writes the contents with full precision, giving me numbers with 18 decimal places. I want to round the elements to a few decimal places. I wrote a function to do this, but it feels kind of clunky. Is there a native way to accomplish what I'm trying to do? I'm using Prime 11. 

I know you can import SysML 2.0 textual notation, but is there a way to export to text notation, or write text notation directly in Modeler to create/manage models?

I was able to import the XML from Creo Schematics and autoroute my harness, however, the spools imported by the XML are locked and I'm not able to edit them in Creo. i.e. if I want to change the bend radius or the color or any other parameter in the spool, the spool it's locked. Image on left shows the locked icon and image on right shows unlocked spool    Locked icon in model treeUnlocked icon in model tree

I am using Windchill PDM Essentials Release N/A and Datecode with CPS N/A我在編輯某項產品專案的資料夾權限時,無法設定特定參與者/網域(ex:/Default/001_ID)進行編輯的動作,但在其他產品專案卻可正常執行,請協助釐清哪裡有設定錯誤的地方, 謝謝。Here are the errors that I facedCheckin failed: xx-id-test.prt. See the Event Management console for details.Warning: Regained floating license: you can resume working.

KEPServerEX 6.14 version 6.14.263.0 The problem statement is that I have Modbus rtu communication where Rs 232 is converted to TCP/IP then via layer 3 switch i can transmit the data to my server in DMZ where the data can be checked using serial port utility software but i am unable configure the same in my Kepware software in the same server to fetch the data. Can you please suggest how to proceed further with Kepware software. I am new for using Kepware but could be able to configure other protocols like Modbus tcpip, opc ua and opc da but unavailable to configure the same. Kindly guide me to get the data in kepware. #kepware 

There is an issue where deleting a field named “A” within a specific tracker and then trying to recreate a new field with the same name results in an error. How can I recreate a field with the same name? Current Version : 3.0.0.2

Saga Robotics’ robots transform strawberry farms in Britain and vineyards in California—eliminating chemicals and advancing sustainable agriculture.    

Hello!!i am kind of new to the program and I have researched but still can not find the answer. I tried to create a solve block where I can get the final reult of a variable H_2 but it does not work.I upload a PDF of the problem. I believe is not difficult but perhaps I am missing something

Why doesn’t Mathcad Prime 11.0.1 no longer accept ASCII code [13] for carriage return (new line)?It appears to work in version 10.0.1 but not in 11.0.1. Is this true for everyone else or just me?I have both versions on the same computer--is there something I am missing?   

We apologize for the inconvenience. Our IT department is actively working on the Creo Elements Direct Modeling Express issue and we will let you know once the issue is resolved.

Hi Community  I am wondering if we have PSM alternative introduced after PSM using pure path technology and build on java platform to monitor the windchill server performance, can I use the last PSM version released by PTC on Windchill 13x or 12x system.

Hello, I am using the free Creo Elements direct Modelling express program and would like to save my 2D drawing in annotation as DXF. Unfortunately, I do not understand on your help page in which file I should change something so that I can save a dxf file. Can you offer me further assistance? Many thanks in advance and best regards Daniel

Hi there,I am trying to fetch the required gross concrete cross sectional area of an RCC column using the SYMBOLIC Solver function as shown below. But I could not figure out what is causing this abnormal output. Could someone kindly clarify this issue? I would be much obliged.   

Where can I see the licenses I've purchased and when they expire?

The Mathcad rounding and truncation functions take the form function(z,y), where z may be complex but y must be real,   This is an unnecessary restriction and contravenes the Zen of Mathcad Rule 16.   This Mathcad Enhancement Proposal (MEP) extends the y argument to accept complex numbers.   Furthermore, the rounding and truncation functions operate only on scalars and vectors, not on matrices.  This is, again, an unnecessary restriction.   This MEP extends the truncation and rounding functions to accept matrix arguments.   The MEP further adds a function frac(z) that complements trunc by returning the fractional part of complex z; frac vectorizes over its arguments.    The MEP further extends the mod function to accept complex arguments; mod vectorizes over its arguments.       Stuart   Demonstration Mathcad Express 10 worksheet attached in support o

What I have here are two measured displacements over the same time with an equal interval of 1 second. Both oscillations tend to approach the resting asymptote, which is the same for both. The first one at the end of measurement didnt manage to approach, but the second did.For my task, I had to find periods and amplitudes of oscillations. To get periods, I simply used the difference between two interceptions of oscillation with asymptote via root() function. One of the arguments for this function is a guess points between which this interception should be met. For those points I pick local extremas (or peaks shortly). To get them, I need to know the first derivative of the oscillation function and look for the points where derivative becomes zero. But in my case, I have only empirical data, which I have to use to get proper constants a and w for the oscillation equation.Based on this, I created splines for both data sets, and started taking derivatives to find a slope.To get local

Version: Windchill 12.1 Use Case: I am looking for a solution to prevent the check in of ModelCheck (MC) validated data having MC_ERRORS = 0 if attributes are modified e.g. in the workspace after MC was executed.Description: Here is an example:1) configure MC Gate Keeper and do not allow data to be checked if MC_ERROR > 02) We've defined a simple MC configured to run on each save. So we are sure, that MC was run when last modified.3) MC e.g. evaluates certain attribute values and will mark it as error, if validation fails. Now the user does the following:1) Saves a CAD file with ATTRIBUTE = "X" (this is a valid for MC) => ATTRIBUTE = "X" and MC_ERROR = 02) User changes ATTRIBUTE = "X" to "Y" in the Workspace ("Y" would be an invalid values for MC) => ATTRIBUTE = "Y" and MC_ERROR = 0 (remains unchanged)3) User checks in the cad file and the gatekeeper does not prevent the check in as MC_ERROR still equals 0 !How can this be prevented without programming a trigger?&nbs

HiFrom a few days I am unable to access PTC site when I ask to request an activation key, either for version 8.0 or version 9.0 (I installed just yerterday for trying to solve this problem !). I am falling always on this site error  :What can I do ?Yersterday electric outage stops my computer and I lost access to works in progress !Help me please.Best regards.Bernard Ancelle

Hello All,Today I had P11 installed. It is worse than P9 and P10 combined in terms of speed. Also, I dont know why the Text Block, Text Box,  Image, Copy, and Paste  are greyed out.  Regards,Sam

I am using Creo Parametric Release 4.0 and DatecodeM1301.목적 : 챔버 내부 볼륨확인.2. ASSY→슈랭크랩 변환. ( 내부 체적이 포함된 상태 슈랭크파일 1.prt 와 내부 체적이 포함 안된 슈랭크파일 2.part 를 생성해서 1.prt-2.prt를 하면 내부 체적이 나올 것입니다.3. 안되는 부분. 슈랭크파일 2.prt 가 생성이 잘 안됩니다.-> Assy의 일부 prt들이 SURFACE로 변환된 부분이 발생함. ( 불필요한 단품드르이 체적이 합산되어 버림 )-> 다른 원인이 있을 수 있을 수 있음.

Hi everyone, I’m facing a small issue with ThingWorx Git extension.   Let’s say I have exported a project and made a small change in one of the services (but haven’t committed it yet). Then I decide that I don’t want to keep this change and want to revert back to the previous commit version of the project.   Even though I use “Checkout Commit” and then import the entity again, the old version of the service doesn’t appear — the change is still there.   Everything works fine normally when I commit and push, but in this case (uncommitted local changes that I want to discard), it seems not to revert the entity properly. Right now, my only workaround is to commit the unwanted change with a dummy message, and then go back to the previous commit using Checkout Commit — but that’s not really ideal. Has anyone found a better way to completely revert to a previous commit and restore entities (like services) to their exact older state without committing the unwanted change first?

Now that I have been forced onto Prime (changed employers, new install, 15 no longer for sale) I am really struggling with the keyboard shortcut for subscripting variable names. I get that there must be some good reason why PTC couldn't use . (period/dot) for it any more, but seriously "ctl -" is about the worst possible key combination they could have come up with instead - diagonal opposite corners of the keyboard making it a difficult one handed combo with lots of scope for mis-pressing one of the 2 keys and ending up creating some nightmare instead of the variable name you intended? I know word uses "ctrl +" and "ctrl shift +" (or something like that) for this, but the whole world doesn't have to follow microsoft's mistakes blindly. Please please please give us a single key shortcut for subscripts in variable names - is there somewhere we can start a petition of something to lobby for this? I am wasting hours and hours of time going back and re-typing my variable names because

Version: Windchill 13.0 Use Case: I am using two groups within the context of a product in my Windchill instance. One group is a member of the "Members" role and one group is a member of the "Designer" role. None of these roles have the "Rename" action enabled in the "Configure Actions for Roles" table.Description: Both groups are able to see an option for "Rename" in the "Actions" menu of a part instance contained within my product. Both groups are members of a license profile which provides the "Rename" action to them. However, according to https://www.ptc.com/en/support/article/CS110240?source=search , "Configure Actions for Roles setting will override Profile setting". The groups I have referred to are not assigned to any other role which has the "Rename" action enabled. Can anybody explain why users in these groups may be able to see the "Rename" option?

I'm using MathCAD 9.0.0.0. I have 2 equations with 2 unknowns. I need solve for "DF" and "DG." I've attached 2 files. The file I need help with is "MET211_ProjectP2_Sections.mcdx." The other file "MET211_ProjectP2_Joints.mcdx" I attached as reference because I already solved for these variable using another method. Those of you familiar with Statics know there is the method of joints and the method of sections. Not that you need to know Statics or need the reference file to show me how problem solver works, I just added it incase it helps you understand my situation better. The way this was demonstrated was the demonstrator had a fancy calculator with a "problem solver" feature that allowed him to plug in 2 equations to solve for 2 unknowns. I don't have a fancy calculator. All I have is MathCAD, so I hope this can do it. Thank you,     Brent

Hi Community,I'm working on a ThingWorx 9.6 system integrated with Windchill (using WindchillAuth). I'm trying to download file content from Windchill using the URL I get from an OData response, but I’m running into an issue. From the Windchill OData service, I receive a URL like this: https://<windchill-host>/Windchill/servlet/WindchillAuthGW/wt.fv.master.RedirectDownload/redirectDownload/20147_910-92%20CACAO%20MASSA%20PLANT.zip?u8&redirect=true&ContentHolder=wt.doc.WTDocument:3xxx462&HttpOperationItem=wt.content.ApplicationData:45xxxxx52&forceDownload=trueI want to download this file from Windchill into ThingWorx (or serve it in a Mashup).I'm using WindchillAuth in the Integration Connector, and other OData calls are working fine. When I try to download this file using the above URL (either through the connector or directly), it fails. same happens with 2dthumbnial also When I paste the same URL in a browser (while logged into Windchill from