Creo+ and Creo Parametric

Hey there. This is my very first post 🙂 I have made a drawing of a car sign. I did my best. Then I needed help to bend the sign i two directions, so I got help from a **bleep** i know who teaches in Creo. But it is not quite okay yet and I can't get in touch in the "teacher" now. Is there anyone whom I can communitate with and send the drawing to. RegardsMichael   

I have ModelCheck configured to issue an error and prevent check-in if a part does not have a parameter set to a known value or does not exist. If I create a new part and delete the parameter, ModelCheck functions as expected, and the check-in is blocked. If I have an existing part that got checked-in before I enabled the check for the parameter, it allows the check-in to go through and issues no error or warning for that file. The existing file was loaded into Windchill with the old ModelCheck rules, before I tightened them for this parameter. When running ModelCheck interactively, it still does not generate an error. MC_Verified is set to YEs from the prior check-in and we have set the value for ModelCheck hours to 100,000. Has anyone else seen this behavior before?  

I have some suppressed features in part model. I want to enable that suppressed features in assembly level. (Like simp rep). Is possible to do in part level simp rep? or other option.But I don't want to create an instance.        

These options are too short, not a complete word, and the PTC help document has no relevant explanation, I don’t know what they mean, can anyone tell me, thank you! I hope that the PTC help documentation can add explanations for all these options and sub-options. 

for an existing drawing view, i want to change its rotation of that view .   For the existing drawing sheet I want to do modification in its view orientation ,but rest over dimensions will remain unchanged (should remain same). only there shouldbe a change in view rotation & no need add or giving dimensions again from beginning.Is there any tool or feature to perform this activity ?(actually i am making a assembly drawing of a model) Plz kindly reply to this …..  

I bought a license "Creo 9.0 University Student Edition Premium License". After I configured it I still could not create Mold/Cast Cavity. What should I do then?      

Hi,I'm starting to study the creo welding module.I have a question. Is it possible to change the welding standard from ANSI to ISO in a model?I've done several searches in the guide and on the internet but I haven't found a solution.- First attempt: If I change it from the welding module preferences menu, the change does not take place. - Second attempt: It seems that the "weld_ui_standard" config option only affects new models. - Third attempt: The "weld_symbol_standard" option in the drawing options has no effect... Can anyone help me?Thank you.P.S. I use Creo 9.0.2.0.  

These options are too short, not a complete word, and the PTC help document has no relevant explanation, I don’t know what they mean, can anyone tell me, thank you! I hope that the PTC help documentation can add explanations for all these options and sub-options 

I have a drawing that on it's second page uses ordinate dimensions. Out of these, the "X" value .000 dimension lost the reference and is now colored purple. If I erase this baseline dimension, them all other dimensions associated from this base point go along with it. I want to avoid this, is there a way to redefine the dimension so that it is no longer purple or perhaps a way to disassociate the children dimensions form it?

i have a big assembly with a lot of fasterners. many fasteners are the same. those share 1 bom balloon number.some fasteners are only used in specific configurations of the model. in this 1 view i have 1 (nut 1 = N1) lock nut that is always used . and 1 (nut 2 = N2) that is only used in configuration Xwhen in configuration X i need this view to have the balloon on N2. the balloon with the same number for N1 is already in a different view when i have it all set up correctly in configuration X and save it it is fine when i open itit is when i go to configuration Y that i see that the leader of the ballon from N2 has jumped to N1, the balloon itself is still on its spot so i basicly have a line running tough my view.when i configure it back to configuration X the leader does not return to N2.this is very annoying. i need the balloon AND LEADER to stay with N2, and when N2 is not used i just need it to dissapear. just like the balloons do for normal parts (often only on

I am trying to recreate a velvet endmill, and frankly, I have no clue where to start with modeling this.  Usually, I use a helical sweep to model normal endmills, but this has me stumped.         

Hi, I am trying to insert a custom component by using the Insert Component option,But I am not being able to select LOCATION ON THE CABLE, any help is appreciated. Thanks in advance! Regards,Vinay    

I have 6 feature/groups in creo part model. please find the attachment.I need to resume only one group/feature and suppress all others according to my input parameter using Pro/Program.-----------------------------------------------------Example:Let my input parameter is a string: M12Then Resume Group_M12 and suppress Group_M6, Group_M8, M10, Group_M14 and Group_M16.-----------------------------------------------------I need to execute this by using the Pro/Program.Could someone support by  writing a program for this case?    

Hello, Does anyone know if it is possible to get Matlab Simscape to work with Creo 9.0?I am using the student version since I need this for a project.I manage to get it to link but I seem to be having trouble getting it to work.For some reason, I get an error when trying to generate a XML file.  Any help will be appreciated,  

Hello!I would like to have a kinematic for telescopically boom of crane.The boom has 2 moving sections. There is one cylinder on the section nr.1 (base to section nr.1). If this section moves the section nr. 2 has to move with the same way. Later this will be done by rope system.As shown in the video, I need somehow to set relation between 1 and 2.How can be done this? Thank you in advance for some ideas! Plamen(I would like to say: I use motion sceleton. I'm not interested in mechanism. Please to not give me proposals for mechanism)

Hi, is there a feature like this in Creo to lay all selected parts flat on a surface ? Arrange in Fusion 360:https://www.youtube.com/watch?v=0x9bS1wlaUo Thanks,

Any body have worked on integration of Solidworks PDM and Creo? Need help in this case. 

Hello, I would like to use the model check to verify if a parameter has been filled in.Can you help me do this? Thank you. model check   

Before we were able to start up Creo and it would ask us select which floating license to use.PROE_DesignEss or PROE_DesignAdv.Now it will default to whatever the default parametric.psf license is first. I can switch it back and forth manually but would like to get back that option for selection we have previously so our users can select it instead of needing to manually change the file.       

Hi all, My company is still stuck on Creo 3 (yes, I know that's ancient - supposedly our IT department is working on upgrading us to 8 - not sure what's taking so long). Anyway, a common problem we have to deal with is the dreaded purple lines that pop up in drawing files whenever an assembly has a part derived from a STEP file that isn't perfect.  My question is: has PTC ever fixed this issue in newer releases of Creo?   

Is it possible to set a 'Start in' Directory for Creo+   Thanks Gordon

Hello, I use Creo version 8, If I have more sessions open and one of them is busy, all other sessions are blocked until the task is processed. Is it possible to have a solution where it would be possible to continue working while the task is being processed? Thanks  

 Hi,    Anybody knows how to  import rhino model contains attribute user texts into creo.   

We recently bought Creo Ansys license and started facing this issue in some of the latest high tech laptops. after applying Loads and Boundary condition the solver is getting stuck at 0% solve for hours and hours. Creo Version : 7.0.6.0Laptop : Think pad P15 Gen 1  

I am using Creo Parametric Release 7.0 and Datecode7.0.5.0I would like to write a relation like this STD_LUM - 2" x 4" but if I write String Parameter using Quotation mark the results comes like this STD_LUM - 2 ' ' x 4 ' 'SIZE = "STD_LUM - " + itos(W) + "''" + " x " + itos(H) + "''"Here are the errors that I facedResults not came as per my expectation.