Creo+ and Creo Parametric

 Hi all, is there a way of editing the dimension line for an ordinate dimension?I don't want the full length arrow like in the attachment - just a short arrow pointing to the extension line. thanks

The following tables are created in Creo and exported to csv. It is similar to what we want to implement.Therefore, the following points should be considered.1. Can I create and export the table as shown?2. Can I export extensions to xls?3. Can I insert a table into a specific area of an existing Excel file (xls or csv)? I would like to know if it is possible with a map key or a toolkit. please teach me how to get that   thanks regards

Can someone tell me what Relation should i use to create a Parameter that captures number of Holes in a Part. If I use Hole command in a Part to make Holes [Not Extruded Cuts] and did patterns for few of them, I want Creo to capture Number of Holes including pattern members into a Parameter called NUMBER_OF_HOLES @MartinHanak @tbraxton @KenFarley @TomU   

Few days I have problem with simulation and it gives below error. This error is the same for all models and for all simulations (thermal, pressure, etc.). Can anyone please help me I have to submit my project soon. "Integrated mode error checking found error(s) in the modelafter creating the Creo Simulate database." 

Hi All,Can I see that how many weld feature I used? Can I see this as a parameter on Creo? Thanks for replies.    

I have multiple closed sketches on a body. There are thousands of these sketches. I would like to create separate  parts or features from these closed loops . What would be the fastest way besides Creo Toolkit?

Hello Gentleman, I am running Creo 8.0 structural simulation. It takes a lots of time to run the simulation, while system is barely working CPU roughly 4% and GPU around 0. When I`m moving the 3d part the gpu goes up, so the settings are correct in the nvidia panel. GPU:RTX A2000 LaptopCPU:11gen i7-11850 @2,5GhzRAM:32GB Can you please help how to improve the system usage of creo? Kind regards,Balint.    

Hi Martin, I'm using Multibody design for smaller welded  designs. I call it "little assembly".It works very good in 3D modeling.Now my problem:When I create in drawing a section view, I only can see the cutted geomtry.All bodies behind are not shown.How can I resolve it?CREO 7.0.5.0   

  Highlighted thing shows whenever i keep the view normal. can anyone help me? This problem is only with part.

I am using Creo Simulate Release 7.0 and Datecode7.0.10.0I am trying to run a dynamic load analysis for a large cyclical imbalance on a shaped beam. I can get the modal results. I applied sinusoidal loads in two directions to simulate the rotational imbalance. Simulate runs through the time analysis but I get no results. It looks like the load is not being applied.

I'm looking for what used to be called "Start Point" in sketcher -- or some other way to tell Creo where to put the sketch on a trajectory.  I see the  Setup > Feature Tools > Start Point, but it's always grayed out, not available.  I want Creo to put the sweep sketch at the other end of the sketched trajectory. In a search, I found another post about this, but the answer is for a much older version, so doesn't seem to work with Creo 9.  Is it another silly hidden magic click?  Or a completely different process?  Thanks.

I have an issue that just recently started where when I have an open model I can not drag the green insert here bar, even when I have the item checked out.  This is happening in prt as well as asm model trees.

Hello all, We are using the Windchill 12.0.2.2 and we would like to integrate our current windchill with the AWS IAM for the user management. So is it possible to do or use the AWS IAM as Active directory with the windchill. I tried to find some details over the google but didn't get any conventional details. It would be really helpful and appreciated if i can get some details on it, Thanks in advance.     

Hello I'm struggling with PTC_WM_* parameters while MODELCHECK.  When MODELCHECK done it's job it shows me report where all of the parameters are marked as non existing in start part. But all of this parameters was created by Windchill in my start part and than start part was exported to the folder where all start parts suppose to be. How can I fix this problem so my MODELCHECK see PTC_WM_* parameters in start parts?Thanks in advance.      

The only user id information I can find in performance advisor, as shown in https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS197086‌, appears to be encrypted.  How can I use this to identify a user?

I am using Creo Parametric Release 7.0 and Datecode7.0.8.0When opening a second model, the new window opens behind the original window.

Often, I am faced with this window: Problem is, its yes/no buttons are not responsive because the system is waiting for acknowledgement of this dialog box: Sometimes, there are several of these warning boxes, and often, they are hidden behind other windows and not accessible except via moving them "to the front" via the taskbar manipulations.   I am wondering if there is a config.pro option to prevent the application from displaying this annoying (on so many levels) warning dialog box.

i want to transfer my license from old computer to new computer. we don't have contract updated. Where can i download creo parametric 2.0 thank you 

I am using Creo Parametric - Release 3.0 (connected) 3.0 M100Edit Parameters Tools menu is missing options and the parameter list is abridged. There are tons of missing parameters in this particular manufacturing model. CL_DIST is a big one that my Post Processor uses and it has gone missing in the parameter list. Starting a new manufacturing file remedies the situation but I need to know how to fix the one that is already complete as there is a lot of work already done and starting over every time this happens is not a solution. I need to know how to correct this issue if it ever happens again. I did attempt to export the parameter list from a good model and open in the broken one but I receive a long list of errors stating not valid.

Creating a drawing of a large assembly. It has 60 items after I've used Flat/ Rec Item and Filters.But the list is sorted with assemblies first and then parts. The second sort order goes after the model names in numerical order.But I want to reshuffle the order so that I get the most important items FIRST (as number 1 and onwards) and the fasteners, screws, washers, nuts LAST. How is this done?  

Every time I boot up Creo Parametric, it reports error 0x06000012 and it shuts down. Something about being unable to run the quality agent. Any advice?    

Is it possible to create sub-sets of restricted parameters, so that the first parameter selected from a restricted list defines the restricted list for a second parameter?An example is tolerance standards for different processes.  Rather than have one long list of ALL tolerance standards (including e.g. die-casting, injection-moulding, sheet metal etc), is it possible to have a restricted list of Processes first, which then defines the second restricted list containing tolerances for the selected process only?Example in other words:First parameter - choose 'Die Casting' from the list of processes.Second parameter - choose from a list of standards only applicable to Die Casting.  

I am using Creo Parametric Release 8.0 and Datecode8.0.1.0When I print a postscript file, Adobe Distiller leaves off ASME fonts from the drawing like diameter and degree. What font do I need installed?

Hey, I want to set tolerancing standard version to ISO 2018 but only ISO 2012 and  2017 are available in options, is there any file which can be downloaded to get the ISO 2018 standard?    

i have a big assembly that adds, removes and shapes parts based on the given parameters.(input in excel, most part numbers and dimentions are determened in the excel. this information is put in a tekst file which creo parametric model reads)  this makes it not possible for the file name to be the part number as it changes based on the inputthis part number is now in a parameter called PART_NUMBER to print all the drawings form ONLY the active parts and assemblys to pdf, i found i need to "remove not displayed" and then save the top assembly as a copy and have it copy the drawings with them. (to isolate only the active models drawings)then i can use the probatch thingy to print those isolated drawings to pdf for the new file names i need them to be the current value of the parameter PART_NUMBERi added the column PART_NUMBER next to the column "new file name" so i could manualy type it in.... (not ideal)i cant copy paste as it does not let me copy the number (guess it