Creo+ and Creo Parametric

Check out this video on Creo Simulate Advanced Techniques from PTC Application EngineersPresenters: Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow)Original Date Presented: February 22, 2022Creo Simulate Learning 

In this video, we will learn to customize the system color set background color to display a gradient between two colors

   

Check out this video on Creo Advanced Modeling Techniques from PTC Application EngineersPresenters: Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow)Original Date Presented: February 8, 2022 

Well-known community member, Stephen, tells us he has two interests: Creo - and saltwater fishing with his wife in the bays along the Texas coast for red drum, black drum, flounder, and sea trout. Below, a good day with a 30-pound black drum he released.Stephen is Texas born and raised, spending most childhood summers on his grandfather’s hard-working farm.  He’s been involved in Pro/Engineer-Creo community since the mid to late 90’s, well before PTC had an integrated community. He says:  “I enjoy helping other users learn how to use Creo but mostly I like learning things about the software I didn’t know. There is likely not a week that goes by that I don’t learn something on the Community that I can put to use.  I absolutely know that without the community, I wouldn’t be as good of a Creo user.”  We couldn’t have said it better ourselves! Right now, Stephen makes parts/assemblies and drawings although he said that he used to do a lot with Creo’s routed sy

Check out this video on Creo Reverse Engineering from PTC Application EngineersPresenters: Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow)Original Date Presented: January 25, 2022 

Check out this video on Creo Sheetmetal Design from PTC Application EngineersPresenters: Lino Tozzi (Technical Specialist, Fellow) and Tom Quaglia (Creo Segment Sales ).Original Date Presented: January 13, 2022. 

November 17, 2021 Replay WebcastNote: This video has chapters available in the player menu — hover over the chapter list to jump directly to any topic below.Chapter Summaries0:00 – Welcome & Agenda: Panelists, Q&A Setup, Session Overview Dana opens the CFD for Creo webinar and introduces panelists Rich Moore, Alex Zhang, and Li Shi from Simerics along with Todd Kraft and Tom Quaglia from PTC, then Rich previews the agenda covering Creo Flow Analysis fit, roadmap, and an electrification demo. 2:07 – PTC Digital Thread & Simerics Partnership: Analyst-Grade CFD in Creo Rich explains how Creo Flow Analysis brings the "unseeable" fluids and heat into the digital thread with full associativity, positioning Simerics Incorporated as PTC's strategic partner to deliver analyst-level CFD alongside high-end packages like Simerics MP, Ansys Fluent, and Star-CCM+. 5:20 – CFA Packages, Digital Thread Integration & Business Value Walkthrough of the Base, Plus, and Premium tiers (fluids

Check out this video on Creo Sheetmetal Design from PTC Application EngineersPresenters: Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow)Original Date Presented: January 11, 2022 To dive deeper into the subject, check out  Sheetmetal Design 

Applicable Releases: Creo Parametric 1.0 to 8.0   Description: In this video, we will be using ModelCHECK to Get overall size of the model Calculate model size as X, Y and Z coordinates Get bounding box of a model

Applicable Release: Creo Parametric 1.0 to 8.0   Description: In this video, we will learn what settings are required to control import of DXF/DWG files in Creo Parametric

Applicable Releases: Creo Parametric 1.0 to 8.0   Description: In this video, we will learn what settings are required to control export of DXF/DWG files in Creo Parametric

Applicable Release: Creo Parametric 1.0 to 8.0   Description: In this video, we will learn which configuration options control the number of decimal places for the dimensions that are going to be created in Creo Models and Drawings.

Applicable Release: Creo Parametric 1.0 to 8.0   Description: In this video, we will learn how to set the number of decimal places for for one or more dimensions displayed in a drawing.

Applicable Release: Creo Parametric 1.0 to 8.0   Description: In this video, we will learn how to set the number of decimal places for all existing model dimensions using the Find (Search) Tool.

Applicable Release: Creo Parametric 1.0 to 8.0   Description: In this video, we will learn how to set the number of decimal places for existing model feature dimensions  

Applicable Release: Creo Parametric 1.0 to 8.0   Description: In this video, we will be executing a Mapkey stored in Config.pro through  Creo Distributed Batch Tool The mapkey operations include performing Hide and Save status of All model Layers The mapkey is setup to save the modified model after execution ( <save_model>true</save_model> )

Applicable Release: Creo Parametric 1.0 to 8.0   Description: In this video, we will be configuring Creo Parametric ModelCHECK to add missing relations to Parts and Assemblies. Configuration works for both Parts and Assemblies.

Applicable Releases: Creo Parametric 1.0 to 8.0   Description: In this video, we will demo how to change the default template for: solid part sheetmetal part design asm drawing

In this video, we will learn to use Modelcheck to add parameter by check item PARAMCHECK

In this video, we will learn to use Modelcheck to add check parameters by "add_chk_param"

In this video, we will learn to use Modelcheck to delete parameters by check items EXTRA_PARAMS or PARAM_UNWANTEDse Modelcheck to delete parameters by check items EXTRA_PARAMS or PARAM_UNWANTED

In this video, we will learn to customize the Text Symbol Palette to add a custom symbol

Applicable Releases: Creo Parametric 1.0 to 8.0   Description: In this video, we will demo how to change default fonts for drawing text via detail option default_annotation_font

Applicable Releases: Creo Parametric 1.0 to 8.0   Description: In this video, we will be using "Active Layer Object Selection" option to: Control the display of features or datums in a drawing view Control display of items in layers on specific drawing view Hide/Unhide the features added in layer in specific drawing views