Mathcad

Hey guys,with the help of Werner i could manage my Iterative Calculation Routine.Now i need to extend my work.What i would need:2 Parameter Variation of "F" and "ME" with a well defined Calculationstep of those 2 parameters.For Example:Calculate FAmax with ME=0    ---> Iterationstep for FA = FAmax/40Calculate MEmax with FA=0 ---> Iterationstep for ME = Memax/40Now those 2 Iterationsteps should applay to the "2 Parameter Variation"The Results should then be written in a Matrix so that i can export the results to excel.I think i only need a small add in to my Programm, what i have now.Maybe anybody can help meCalculating the Iterationstep should be possible with my mathcad program as i have now:Calculate FAmax with ME=0    ---> Iterationstep for FA = Scalingfactor x FAmaxCalculate MEmax with FA=0 ---> Iterationstep for ME = Scalingfactor x MEmaxScalingfactor should be choosable!Next step: Mathcad should perform a Iterative Calculation for every c

(view in My Videos)

Hi, I am looking for molecular weights functionality in Prime 3?Can anyone assist me. am looking for a function in MathCAD Prime, t@hat will give me the atomic or molecular weights of elements or molecules

What`is mean the TOL & CTOL? How can i fix it?

I'm trying to build a table column by column and I'm getting the "A name is required here" error. I've double checked to make sure that I'm using the literal (".") and vector ("[") subscripts correctly to the best of my knowledge. I've set my origin to 1 at the top of my sheet. I've searched and can't find anything to help.Any help and solutions are appreciatied.

I have been using a spreadsheet in Math Cad 6 that worded fine for years.  Upgraded to Prime 2 and the spreadsheet no longer solves the find command in a solver block.  What can I do to remedy??  The find command  has an error statement that the variable is undefined.  Can't seem to be able to cut and paste into this doc

Hello,Previously the license it was working on the physical machine running on Windows 7 and have been requested for generate new license for the new license server.After I have receive new generated license for new hostname and mac address. and tried to install it on the license server it keeps telling me error ptc_d: The desired vendor daemon is down. and FlexNet Licensing error:-97,121.My license server environment is on Windows server 2008 running on VMWare. and there is other 4 licenses flexnet also running on the same server.Please let me know how to fix this issue?thank you.

Somehow I came to this error making this problem to work, could anyone help me out fix this please.

Please tell me how can i solve it?

Can anybody tell me why "atan" doesn't work?  Or what mistake I made ?

Hi, I'm using PTC Mathcad Express Prime 3.1 for my UNI work.Unfortunately, I hate using Tahoma as my default text font. Is there a way to permanently change the default text and math fonts to something like Cambria Math?

Hello all, I am currently working on a project involving calculations for a Helmholtz resonator and I got stuck with not achieving the proper units in the final results. below are the starting formula and a snap shot from the MathCad project. As you can see, numerically it checks out. The numbers are right, this is what it is supposed to show.However... L units should be mm, not m/s. If I run out individual calculus, multiplying or dividing.. somehow it looses up the degree unit. it only shows 1/s instead of deg/s. Also took into considerations that it might be thinking in radians therefore I added that 180/pi.Also, the plot seems to be a bit off also. Why is the n coordinate going from 1000 to 1900 to 2800...etc instead of 1000, 2000, 3000 how I defined it?However, for the purpose of calculus and further use of those resulting values, I need my L to be in mm. Any ideas on how to fix this?What am I doing wrong?Thank you for your time and help!Cheers.Dan.

Hello everyone. I have a problem with a difference method, shown here below. (The results are different from those of the text). Some of you could kindly say me  if I'm wrong or the text is wrong? thanks a lot.Yours sincerely F. M.

Hey guys,i modified my iterative calculation and it is better to work with that functions and variables.Having now the problem, that the calculation for the second row is not correct. It should be an independend calculation for every loadcase with a different maxiter.And the second example is not working.Can anyone see the failure?THx guys

could you write script float to int

how can i clear matrix symbol with function or commands?like this.

  Hello, Everyone.  solve, W, X, Y, Z ?  Thanks in advance for your time and help.     Regards.

A simplified example probably illustrates my question best:I would like to set multiple variables based on the value of A in my example above.Thanks,Kevin

Can you show me please, when we must use also if not else if. Must not can!

See please MySort     (view in My Videos)

Hi All,I am not sure why the value of Sin (Theta) is not coming out correct in Prime 2.0 (see attached). The calculator value is 0.342. Any advice?Regards,LS

Hey guys,i would need a recursivic calculation with a break condition. I made it so far but now i would need an extention to this calculation.I added a mathcad file in which i described my problem. I hope that someone can help me 😃This is only an example but is describing my problem very goodBest thx!

Is it possible to generate a radio button group with the line items input as a vector?  This would be similar to a list box with one input but with radio buttons for selection.

I created a very simple (basic arithmetic), but long Mathcad file in Prime 3.1 express while away from my home PC.I have a fully licensed Prime 3.0 that I would like to use this file on. Am I out of luck?  Do I need to re-enter this data again in Mathcad Prime 3.0?  Is there any way to convert this file?

To all,I have created a contour plot and trying to control the scale and/or the colour scheme.Under the advanced properties I can see the option 'choose colormap'Q1: with the (default) rainbow map, is red the high value or low value (on the z axis)? look high it's the high valueQ2: I believe (from the doc) one can allocate a colour map ( SaveColormap and LoadColormap functions)Can this be used to create one own scale so that[0-0.1] = a colour]0.1-0.2] = another colour...]0.9-1] = reda 10 band colour mapThanksRegards