PLM

Hi All I want to map certain attributes from Change Request to Change Notice and from Change Notice to Change Activity. I created the alias attributes below mapping rules:theChangeOrder2@wt.change2.AddressedBy2~theChangeRequest2^wt.change2.ChangeRequest2~nametheChangeActivity@wt.change2.IncludedIn2~theChangeOrder2^wt.change2.WTChangeOrder2~fgesArea But I'm not able to find the attribute values migrated from one Change Object to another.Can anybody help me understand my error here.

I am having instance CAD Part and want to fetch Generic CAD Part using java code. Is there anyapi for this.

I am new with windchill set up and just trying to figure it out few queries/confusions. If I get any expert opinion will be great relief /help. Monolithic Installation- 1.Is directory server mandatory to install for any version of WC installation?2.If answer to above question is yes then What are the LDAP settings ( I not able to get clarity form document)? I mean should be keep the same populated values or change it? 3.If answer to question 1 is NO then what can be used?4.We have our company LDAP server set up , we can use that? if yes can some give quick values or any configuration related info for it? 5.If i have installed Directory server and want to use the LDA sever of company is it possible to connect? If yes can someone shares any basic steps involved.6.It would be great if someone gives me approach for installation ..Just for example...Step1 install DSstep 2 - install xStep 3-- install y.. so on. I would like to know what's the best approach to be foll

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020-CPS20We have installed Catia V5 2016 and WBM_11.1

I'm Trying to get the Associtated reference objects from windchill odata services but there's no API related to that object, but in Endpoint Description they mentioned about that as shown in above image.  Any leads or solutions are appriciated.

Hello All,  I want to implement SSO on Thingworx(navigate) on Azure Cloud. How should I do that and what are the necessary things I need to configure and where to configure, and all details I need. Any documentation which explain  clearly other than PTC docs. ThanksKSM

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.10workflow template administration page is blank.

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.0How can we restrict users from changing the lifecycle state using the importable spreadsheet?We attempted to deny/absolutely deny access to set state, but users can still change the state via the importable spreadsheet.Additional context: Users should have access to use the importable spreadsheet but rights should be restricted only on changing the lifecycle state.

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.10Using PostMan to call WRS endpoint servlet/odata/PTC/GetCSRFToken(). For one user, it returns Status 200 200, but no data. The same call works fine for other users.

Version: Windchill 12.0 Use Case: Deployment AutomationDescription: Hi all, As a part of deployment automation I wanted to know if there is any way to Export and Import Type Constraints especially Legal Value Lists easily. Like maybe a Loader file. 

hello. I would like to use 10-digit numbering when creating a new product in Creo connected to Winchill.After installing the basic OOTB (Windchill 12.0.2.7), I confirmed that a 10-digit sequence was given when I connected Creo to the server and created a new one without any settings. After modifying Windchill EPMDocument OIR from 10 digits to 5 digits, a 5 digit sequence is given even when creating a new one in Creo. (Confirm that the changes are applied) However, no number is given at all from the actual operating server that has been used and upgraded for a long time. When you connect Creo to Windchill and create a new file, it is created as prt0001. Even if you import OOTB's EPMDocument OIR and edit it with the operation server EPM OIR, the symptom is the same.It seems that OIR cannot be applied at all in Creo.

I have Installed WC12.1 , I started Method server, HTTP Server and Installed WDS 11.2 and start DS as well.. but in the Log file i see this warning " WARN [main] wt.manager.ServerLauncher - Starting wt.cache.MasterCacheMonitor" ( Attached log for reference) unable to login to Windchill home page and method server doesnt start further.  I updated host file with IP Address full domain name name.  could you please help me with solution.

Query Builder is not the worst tool ever but if they only documented the limitations, it would save me hours of time. I've been working with union queries recently to get around some of the limitations (10.2) of the UI when dealing with queries across the 3 main data types (Parts, Docs and CAD Docs).  For all those who do not know, do make a union, you need to create your queries separately in Query Builder and export them to a .qml file.  This is an XML file that contains the query definition.  You will see some header stuff but your query will be wrapped in a "<Statement>" clause. Create a new qml file with this template: <?xml version="1.0" encoding="UTF-8"?><!DOCTYPE qml SYSTEM "/wt/query/qml/qml.dtd"><qml bypassAccessControl="true" legacyMode="false">   <statement>       <compound type="union">       </compound>   </statement></qml> Take your <Statement&gt

Is it possible to get the result exported in the form of attachment as CSV to the email notification sent by ”Data Monitor“ in Windchill

Hi Guys,I am looking for AutoCAD CAD worker configuration, i can't able to see the AutoCAD name in CAD worker Type. Regards,AJ

I have a ticket open with support but my guess is that the community may have an answer first (again). New available entries in enumeration table are displayed correctly in the enumeration but are displayed in the Remove table when viewed from the Managed Type attribute that uses that Global Enumeration value list.   We are on Version 11, M020. The global reusable enumeration is at site. Its a list of project numbers ( 1234 - Name of project). This table has a list of selectable values on the left and a list of removed on the right. The left can be selected, both can be searched if those on the right have been used on a CR, Document etc. You know how it is suppose to work 🙂 What is happening is I can move the items from the left column (selectable) to the right (not selectable) and the table when used displays these changes. All good. But, any new value added to the left is displayed in that Managed Attribute table (save, done) but then it does not displ

We use a form to produce.We want Cad Model views to be created in the document by entering the part number. This view can be the creo view view.Otherwise, we do this manually.I am waiting for your support.Thanks Selim AKÇELİK

hello.An error occurs in the revise function of Windchill epmdocument.When the epmdocument and wtpart in the released state are respectively revised, the revision of wtpart is completed.The error below occurs in epmdocument and cannot be revised. Does anyone know how to resolve this error? Attaching the error log file.

Hello PTC Team.For some reason I am not able to register a new Server in Work group Manager.All Windchill services are up and running and I am able to login to Windchill as well.I get an error: "Browser Service is unavailable.Environment:Windchill Release: 12.0.2.0windchill 2.2.1 REST Serviceswindchill projectlink 12.0.2.0windchill pdmlink 12.0.2.0Would you please help?ThanksLaszlo

Through java i collected all the cad assemblies from the BOM in  windchill  and i added the Cad Assembly into the workspace, I wanted to checkout those Cad assembly from the workspace and do checkin from the solid works. I tried the below code to checkout but it is checkout from the windchill side not from the workspace//Get check out folder for the current user in the sessionwt.folder.Folder checkoutFolder = wt.vc.wip.WorkInProgressHelper.service.getCheckoutFolder();//Check out objectwt.vc.wip.CheckoutLink chklink = wt.vc.wip.WorkInProgressHelper.service.checkout(cad, checkoutFolder, "Check out comment");

Hello,How can I migrate CAD Assemblies containing already existing components using Windchill Bulk Migrator?Or is there an option to automate linking cad components to the assembly as a post migration activity?I am using Windchill 12.0.2.14. Thanks.

Scenario: Add to workspace of the structure of Solidworks. User has no download right of one file from 100 files. currently the error message won't show on which file exactly the user has no access. but shows much more files, on which the user has access. even "work as designed", but it makes the support not possible.Article - CS131433 - Download content fails during Add to Workspace in Windchill PDMLink if the user does not have access to download all the files involved in the operation (ptc.com)

Hi Guys,I create a one WT Part (name:test1) and again i need to create a new WT Part when i create this i want the same attributes value what i filled in test1 i want the same things in new WT part (name:test2).Point 1: I want both the WT Parts has been linked eachother.Point 2: If any body modified the test1 WT Part it's also updated in test2. (Selected attributes only) It's possible in our Windchill.Regards,Aj

I am trying to update Part attributes of BOM, using Excel upload function.  1) By the way, what value should I put in Excel's cell to change the value that has already been entered as a character or number to "Null"?  2) What DB table should I change the Attribute value I defined in "Type and Attribute Management"? using Windchill 13.0.1

Hi Guys,How to run the Multi-CAD softwares in CAD worker at single server.I done a CAD Worker configuration for Creo & Inventor - site.xconf & Adapter, but i installed both in single server and if i run the both Inventor and Creo only Creo is active and other one shown Fails to Start.But if i set a individual Inventor or Creo Path in site.xconf it's working without issue.Main Folder Name is CAD_Workers site.xconf<Property name="worker.exe.allowlist.prefixes"overridable="true"targetFile="codebase/WEB-INF/conf/wvs.properties"value="D:\CAD_Workers|nohup /CAD_Workers"/><Property name="publish.usesPublishRules" overridable="true"targetFile="codebase/wvs.properties"value="ARBORTEXT PROE INVENTOR"/> agent.inilocalpath=\\SMRWINDCHILL02\CAD_Workers\Autodesk_Inventorexe=D:\CAD_Workers\Autodesk_Inventor\inventorworker.batexe=D:\CAD_Workers\Creo_Parametric\proeworker.batlocalpath=\\SMRWINDCHILL02\CAD_Workers\Creo_ParametricRegards,Aj