Windchill

Error message "RemoteMethodServer.invoke() called on default method server from within method server! Bad loopback code!" is displayed in MethodServer.log during part creation.Need a suggestion, to fix this Error message.I've attached the code snippet below for the reference, so pelase check it. Code Snippet:java.util.Iterator<CustomClassificationBean> iterator = getBean.iterator();while(iterator.hasNext()){CustomClassificationBean partBean = (CustomClassificationBean)iterator.next();userName = partBean.getUserName();}catch(Exception e){e.printStackTrace();}RemoteMethodServer remoteMethodServer = null;GatewayAuthenticator auth = null;Class[] argTypes = new Class[]{java.util.Vector.class};Object[] argList = new Object[]{getBean};auth= new GatewayAuthenticator();remoteMethodServer = RemoteMethodServer.getDefault();auth.setRemoteUser(userName);remoteMethodServer.setAuthenticator(auth);remoteMethodServer.setUserName(userName);responseData =(String) remoteMethodServer.invoke("cre

good morning,i have a question: is it possible to start a publish job when users revise an object? for example, if i have a prt released in revision 1 with viewable for Creo View, when i revise the prt the viewable disappear.thanks for answering

Hello guys, hope you are fine!!I have a Windchill 11.0 m010 installation and our users are working with AutoCAD 2018 and the Workgroup manager. We have a 3D AutoCad file, but when it is publish the viewable is just a 2D view of the current AutoCAD view at the moment of publication. Any of you know if is possible to publish an AutoCAD 3D file and have all the advantages so the users could have a quick viewable where they can rotate the model inside Windchill and if necesary open it on Creo View? Thanks in advance to all of you who read this post.Best Luis.

I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.0.0Is any API or customization available to retrieve the PLM user email address to be used to send email notifications?Email is to be used in customization provided in Article - CS63309.Or any way to retrieve "DefaultNotificationSenderEmail".

I came across this while doing some testing with ESI: https://www.ptc.com/en/support/article/CS289128?&language=en&posno=10&q=ESI%20substitutes&source=search  Unchanged Alternates/Substitute Parts and Reference Designators are not published to Windchill Enterprise System Integration after BOM Modification I saw this and pinned it for later but knew it might be a problem. I think I found a work around. In the distribution target setup there is a setting call "Publish only Incremental changes for a modified assembly when publishing a BOM". Changing this to "no" shifts the components to added only but had the effect of displaying all the substitutes.  You have to give up the incremental but in my case, we were deleting the BOM lines and re-adding each time. Do you think there are downsides to using this setting I might not be seeing?

We have the case where a vertical pdf (portrait) is always printed horizontal (landscape). We have the printer settings to automatically rotate and scale but this does not help. With a previous version of Creo View Lite this did not happen, only with Creo View Lite 8.1.I cleared cache but this does not help.Only when the user looks at the orientation and set this properly, then the print is okay.He uses the clipboard to print long drawing batches and so it is extra work to always check and set this.

I am using Windchill MPMLink Release 11.0 and Datecode with CPS M030-CPS11Is it possible to make changes to "Any-level Occurrence Assignment" after creating a process plan创建工艺计划后 “任意级别具体值分配” ，是否可以进行更改   Translated with Google Translate Translated by Corina Ionescu, on April 18th 2022  

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020-CPS16Hi,We are trying to reconnect the disconnected organizations but when we are trying to search in "reconnect disconnected participants" the results are empty although there are disconnected organizationsSteps to reproduce:1. Disconnected a organization2. Navigate to participant administration -->Search for disconnected participants3. Right click on Disconnected Organization --> Reconnect4. Now Search for organization . When we tried searching for disconnected organization here the results are emptyHere are the errors that I faced"No Records found"

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020-CPS08How do I use a variable of html with a "#" in it? It keeps translating it to a ",". I am trying to point to a document in Windchill within a workflow task activity page. So the web address has http:///Windchill/app/#ptc1/ and it is putting http:///Windchill/app/,ptc1/It changes it in the variable section of the task, where I defined the variable and saved it with a "#".Here are the errors that I faced none

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M030-CPS02I am using windchill 11.0 MO30 CPS 02, it has bundled apache 2.4.25 with it. We have identified multiple high severity vulnerabilities due to older version of Apache being used.I know we can download latest patch to upgrade apache, but does the same procedure apply to replica server as well?Here are the errors that I facedolder version of Apache being used.

Subject: How to set default units to other unit types? The current default unit is ea   I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.0.0   When creating multiple parts, how to set the default unit to other unit types? The current default unit is ea   Translated with Google Translator by Hedy Jin on May 23, 2022 ------------------------------------------------------------------------------------------------------------- 标题: 如何设置默认单位为其他单位类型？当前默认单位为ea   I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.0.0新建多个部件时，如何设置默认单位为其他单位类型？当前默认单位为ea

We are upgrading our windchill 11.2 to 12.0.2.5, find some confusion by using windchill 11.2 DS which is using Java 8 to support Windchill 12x. Can someone shed a light on this if you are successfully upgraded your wc to 12 and using openDJ? and the version of openDJ? Any experiences will help. Thank you all very much!

To all,   I am looking to see if there is a association or reference selection in WindChill that will do what I am describing here. We are currently running Creo4, with WindChill 10.2 M030.   Currently, to get a drawing to be "Referenced By" in WindChill, we will add ALL of the instances from a family table to the drawing, so all models are on the drawing. Therefore, this gets created automatically upon check-in. This is great, but when we have large assemblies, 30-40 components in the BOM's, and possibly over 50 instances (or more) in the assembly family table, it takes time to add all these models. It also makes it longer to open the drawing, as it looks to regenerate all the models added to the drawing upon retrieval. Most of the time, we do not even have views for all of the instances, we just add them for the reference by to be built.   So if someone knows what we need to change or set, so we do not need all models added to the drawing, it would be greatly appreciat

I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.0.0I am getting an error when placing this command in the Windchill Shell.xconfmanager -s wt.change2.changeTransitions= CHANGE,PRODUCTION_RELEASED,OBSOLESCENCE,PENDING,IN_WORK,RELEASED,COMPLIANCE_HOLD,TERMINATED,OBSOLETE,DISREGARD -t codebase\wt.properties -perror is attached:

Hello,one of our clients wants to update from Windchill PDMLink 11.1 M010 to M020 because they want to start using Creo 8. When they run PSI Solution Installer 11.1 M020, the Install Maintenance Release option is grayed out. What files they should download from PTC Software Download to be able to install M020 on M010 CPS08?

SPN-2395-F- Windchill Info*Engine Java Adapter Development is about to end its life.  Do someone know by any chance how we could replace it in the future? Thank you 

Hello, We are still getting started with WC in our organization.  We currently manufacturing machines that are sold with a machine specific serial number.  I would like to have a centralized location to hold all the documents that pertain to that machine. For example, manufacturing has build information and the aftermarket has warranty registration documents.   I was thinking of creating a WT part for the model and serial #.  Within the WT part we could attach the documents for this machine to include warranty history, modifications etc.   Any input from the user group would be appreciated.

Although Modelcheck is a Creo functionality I'm asking about the Windchill side of things to get shape indexing going. About Configuring Creo Modelcheck and PTC Windchill for Shape Indexing lists out mass property parameters and Windchill global attributes. Does that mean that both the mass property parameters and the Windchill global attributes both need to be created in Attribute Management ? Or are the mass property parameters created in Creo automatically once model check is turned on and they just need to be linked to the Windchill attributes? 

How can we automate purge files? Is there anyway to do it with OOTB

I am wondering when this electronic signature capability will be available in out of the box Contribute app?   Has anyone tried to implement this in Thingworx apps?   thanks, Preeti

Hi, I have created navigation on ProdMgmt to fetch custom report url for part , but navigation is not returning any response. Collection is coming as blank.1- Below is the json for navigation :- 2- Added navigation in Parts.json 3- Calling custom method in Parts.js for this navigation ;- 4- Response is coming as below :- 

I have two lists of dynamic sizes containing child part numbers (first level BOM) of a part and its predecessor.  I would like to print on pdf in the format of a table as shown below; list 1list 210031000100210021004 1005  The function I am using retrieves one list and populates the already created table using that list (itextPDF.PDFcell) See code snippets below;PdfPTable table = new PdfPTable(2);table.setSpacingBefore(8);table.setWidthPercentage(80f);insertCell(table, list1, Element.ALIGN_CENTER, 1, fa); // insert 1st  columninsertCell(table, list2, Element.ALIGN_CENTER, 1, fa); // insert 2nd columntable.setHeaderRows(1);for (String value : list) {insertCellAll(table, value, fa); //insert rows} public static void insertCellAll(PdfPTable table, String text, Font fa) {// create a new cell with the specified Text and FontPdfPCell cell = new PdfPCell(new Phrase(text.trim(), fa));if (text.trim().equalsIgnoreCase("")) {cell.setMinimumHeight(10f);}// add th

Hi all, we are working on the altium ecad integration and publish some files as secondary content.I found no way to download all of this content simultaneously... is there any way to do that?  

Hi,just wanted to double check w/ Community if there is any Windchill API that can be used to read information from OL file. I need to get mass properties out from there (I am assuming the adapter outputs them in the OL, not the PVS, file).Thanks.

Dear all The creo mapped attributes are visible in the product structure browser with exact values from creo but when we create the BOM the attribute values are not present in the respective BOM Columns. Please provide me with the Solution.Thanks in advance for the solution.