Archive Read Only

Ciao raga, ho un problemino a caricare i files .pkg faccio un esempio così mi spiego meglio... - Creo una parte (un parallelepipedo 100x100x10 mm) nomino la parte ""parte1"" e lo salvo nel file di nome ""file1.pkg" - Con lo stesso file ""file1.pkg"" ancora in uso faccio delle modifiche (il parallelepipedo diventa 100x100x20 mm), lascio identico il nome della parte in ""parte1" ma lo salvo in un file diverso di nome ""file2.pkg" - Chiudo tutto e riavvio. - Apro ""file1.pkg"" e il solido è 100x100x10mm come dovrebbe essere. - Carico all'interno di ""file1.pkg"" il ""file2.pkg"" mi aspetto il solido 100x100x20 e invece il secondo solido caricato assume le stesse identiche dimensioni del primo, pur essendo separato dalla prima parte, ovviamente rinominata in ""parte1.1"" e mi crea una condivisione di parte. Anke se cambio nome parte o assegno loro un ""nome modello"" diverso nell'albero struttura è lo stesso... Sapete come fare per evitare questo problemino? Grazie mille a tutti...

Hello all,are there anyone using Pro Mechanica lite? Which is your opinion about his module? Is it something useful, or is it something that PTC "dropped" like Pro/Manikin?Thanks for your responses,Vassilis Anagnostopoulos

I have a plate sitting on top of two surfaces with a load applied to the top of the plate. I am trying to measure the displacement and stress on the two components holding the plate up. If I just mesh the model, it assumes the two pieces are bonded, which is incorrect. If I put rigid connections between some bolt holes on the parts and the plate, the plate flexes, but the load does not affect the other two parts. The same thing happens when I put interfaces between the contacting surfaces. Any ideas on how I can get my analysis to run correctly? Thanks.

Any ideas?

Good morning all,Is there a way to suppress geometry check errors you get whenopening/importing a neutral (stp, iges) file? Thanks,Matt Matt Gortner | Mechanical EngineerCHASEDESIGN, LLC1400 East Genesee Street | Skaneateles N.Y. 13152315.685.1000 (p) | 315.685.5021 (f) | www.chasedesign.net

Hi all, Does anyone have CAD model of Schroff's Minirack? (19" 12U, 780 depth).(with sliding trays and hinged doors) I will be really happy if early reply arrives..... Thanks & Regards, Jnanesha KS T 91-80-4119 0900 Ext: 466F 91-80-41190901M 994 500 4179- www.quest-global.com

Hello, I am a French technician (sorry for my English). I use Pro/E Wildfire 4.0 configured in Milimeters. I have 2 questions: Is it possible to draw in inch? (by modifying the configuration, I suppose ) If yes how do you write dimensions. For example how do you write on the keyboard 1'-5 1/4 "? Thanks Michel

All,I am looking for the proper format for an ".ibl" file. I have an array of points and I want to create a spline through those points and I cannot remember or find the correct format.I know that it looks something like:Begin SectionBegin Curvex1 y1 z1x2 y2 z2etc...What am I missing?????????? TIAWF4.0, M070Sincerely,Neal RosenblumGeometrix Engineering, Inc.201 N. 13th AvenueHollywood, FL 33019Ph:954-920-2049Fax: 954-920-9574Cell:954-649-9399<u>neal@geometrixeng.c</u>

Pro Gurus:Does anyone have a MS35335-57 star washer modeled in WF3 and don't mind toshare?Thanks.

Jetzt ist es ja so, daß erstmal ein Bauteil erzeugt wird und danach werden die Eigenschaften vergeben. Mein Vorschlag an CoCreate ist, die beiden wichtigsten Basis-Eigenschaften Dichte und Farbe direkt schon bei der Eingabe auszuwählen. Es müßten in den Menüs ""Teil neu"" sowie ""Extrudieren"" und ""Drehen"" ja nur zwei Pulldown-Knöpfe ergänzt werden.

How do you find the Replacement (update) of ProductView Standard for 8.0.50.16

Hi,Thanks to Randy for confirming the problem and sending me the link to thefix.This is a known issue with WF4 M100:

Just switched to wf 4.0 and can not find Ref Dim. In wf 3 it used to be under Edit-> Setup-> Ref DimAny help would be greatly appreciated...

A steel ball, the target mass = 2.6 lbs, the diameter is set between 1.0" to 3.0", to search its feasible diameter. Whatever you change the running preferances and convergent error, it stops at diameter 1.706", mass is .736 lbs, which is totally not feasible answer. The right answer is: diameter 2.60", the mass 2.6 lbs. I don't know what is wrong on my calculating. but, the result is totally not reliable. Does anybody have the same prolem as mine? Thanks, TZ

I was wondering if anyone out there knows which version of FlexNET Wildfire 5 will be supporting?John HengelMCAD AdminNIF - National Ignition FacilityLawrence Livermore National Lab.(925) 422-7608

There is also a package out there called Right Hemisphere (

I've filled out the application form to download the free student edition of ProE several times. However, not one attempt sent the email that is supposed to give me further direction on my download. What should I do?

My problem is that my font I want to write the text with is in TYPE1 format and it´s not supported by PRO/E. Is there any way to write the text with this TYPE1 font?

Hola:Just wondering the same about Pro E in Costa Rica. Anyone usingPro E in San Jose area. Anyone available for home project there?Thanks,Steve Nardy3D Pro ConsultantsJupiter, FLsteve@3dproexperts.com

Hello...any proe users in the Netherlands?is this software widely used in this country in particular?regardsAL.

Hello all, I get the following error while trying to run an analysis in the FEM mode using the msc/nastran solver: Error in access solver file(s). Solving failed. Can someone please tell me how to correct this error. Regards

I want to run a study but I get the following error:Cannot find solution reader "pro_from_feas.exe". Does anyone know how to correct this?

Hi, Can I create a mapkey, which consists of more than one commands(including keyboard/mouse inputs)? Is it possible ??Please reply ASAP. Thank You,Anup More

Does anyone have a model of a large boom crane they are willing to share?The specific one being looked at is a Grove RT880EThanks!Martin T. BrownMechanical DesignerMerrick & Company1099 Commerce ParkOak Ridge, TN 37830(865)241-4642

I'm trying to make sure I have the correct CDs for 9.1 M020. What is the difference between the following CDs?Windchill PDMLink 9.1 F000Windchill 9.1 Point Release F000Windchill 9.1 Service Pack M020Do I need to install F000 before I install/upgrade to M020? Where can I find documentation on the correct CDs?Patrick Williams | Sr. Application Engineer | Engineering Systems | Steelcase Inc. | 616.698.4078