Archive Read Only

Hello everybody I am a new user of pro-e and I'm wondering where I can get some freedwg templates for peo-e 2001 If anyone can direct me to some templatesplease email me.kmiller@s-line.com Kelly Miller

Has anyone had their loads & constraints completely disappear from a modelbefore? I set my model up & ran some simulations last week. Today, I wentto run a few more simulations, I opened up the model, switched to Mechanica,and all my loads and constraints are GONE! Poof! I'm running WF2, M280. Thanks. -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>

How I can presicely place a scetch from one to another scetch, when I used "copy"?

hi, im having problem with pre-select highlight its suppose to highlight the edge or face on the extrusion but its not and how can you download parts if your using student edition. thanks

I'm working on some two-d tables and ran into a few questions.1. Is there any way to add text to a column header such that it only appears in that particular column. I don't want to just extend the name of the parameter due to the length and requiring underscores.2. Is there a way to force text to wrap within the 2D field?

Hi everybody, I m user of Pro E Wildfire 20 and i have a tag:Can we determining a normal vector at defined point on a face ? What is the options?Thanks for you responsesDim

Hi, I could find how to create a .trx file which can be used to createindividual coordinate systems separately from existing csys info.Creating a mapkey and using this file is helpful in easy creation ofcsys, but for 'n' features to create I need to give the command thosemany times which I want to reduce to just one click. So I am in need to create a bulk of coordinate systems by just one ortwo clicks. Is there any way that I get the data of all existing csys inmy model clubbed into one trx file or any way to automatically retrievetrx file info to create all coordinate systems at once so that I neednot have to give the command 'n' times? Thanks in advanceLakshman+91-040-40220422

I have few files which when seen in exploreer its type is shown as XPR & some files shown As XAS files,Can anybody help me out in understanding the same I am Using WF 4

I have a mapkey that does this, but I have a user who would prefer they are automatically off on startup.Thanks,Dave

I have had no success in successfully importing large ACIS (.sat) files into Pro-E Wildfire 4. Small files less than 15mb do not seem to pose a problem. However, some of the large files ~100mb Will not translate. Is this purely due to processing power ?

Does anyone know if you can turn off the automatic selection of previously entered values in the hole depth box? For example, if I had entered a depth of .215 and later wanted to change it to .200, I have to type in the 2, the 0, and the second 0 in order for it not to default to the previously entered .215ThanksTerry

Fairly new to CoCreate. Other than geometrically laying out the sides for a hexagon or octagon, is there a command to draw these multisided polygons?

I just started evaluating GRANITE and I have some questions about the API. I'd also benefit greatly from reading about other people's experiences with GRANITE. I realize this is not the right place for GRANITE posts, but I'm hoping somebody can point me in the right direction. Thanks, Cory

That is a bummer. Here is a screen shot of eDrawings 2009 viewer file open dialog box. Pro/Efiles are an explicit option: When you go to download the eDrawings viewer (may ne be true for thepublisher download) there is a page where you can check "Yes, I want to view3D XML and PRO/E files using eDrawings viewer": Kevin

Does anyone happen to know of a good viewer for ProE files for someone who does not have Pro?Thanks in advance.Ronnie Jones

Quick Question I was just sent a .prt file from a "newer" version of ProE then we are currently running. Is there a way I can at least "VIEW" this file?Jim

http://www.ptc.com/appserver/wcms/standards/free.jsp?&im_dbkey=82672&icg_dbkey=21Maybe we should get this and put the model in front of a workstation running ProE? I wonder if excessive mouse clicks would pass ergonomic standards?This thing should assess the psychological impact of software interaction frustration.

hello,are any of the members of this forum located in South Australia?best regardsAlvaro

Sometimes is pays to procrastinate! Man, this was a fruitful thread today... Thanks to Chris, Alfonso and Brian, I learned today about Blender and GMSH. I don't expect to be given verymuch time to sit down and learn these tools but I will be poking around themin the near future. Thanks for the tips! _____

I'm in the process of loading it, but as usual having NightmareLink problems checking stuff in before I go to WF4. So, I haven't used it yet, but who is using it and what do you like/dislike? Thanks!

Sorry all, I proposed a solution before I knew what the problem was.G93 stays active on the control (Fanuc 31i) I just need a multiplier inmy post. Thanks.

Thanks to Andreas for the solution I was looking for!Simply use the single quote ' for the outer limitations of the string;the parameter value itself should be written as ".

We have a winner - if I don't use my start parts, then it works. Now all I have to do is redo my start parts.The answer came from -H.SaldanaI remember some time back when the intent option came out(200i^2) I noticed that some parts did not have the option while othersdid. After probing a bit more the only correlation I made was that theparts that were started in 200i^2 (w/ 200i^2 start parts) had the option butparts that were started prior to 200i^2 did not. We were using startparts that we carried over from rev 20 and even those parts did not have theintent option. I don’t know if this may the same issue or not butcheck the audit trail on the parts.

Howdy,I just installed Wildfire 4.0 M050 and have some odd things. On the left side, it does not allow me to navigate and set my working directory. Is there a setting that I need to re-activate to allow this? I can go into File-->Set Working Directory to do this but then the "Up one Level" button and others do not work. Have any of you out there experienced this, and if so, found a resolution?Thank you,James Westerfield