Archive Read Only

Has anyone tried or does anyone know if it is possible to instal Pro on a mac running boot camp?

Does anybody find that wildfire is a bit of a strain on the eyes compared to 2001? white lines on a light grey background is a bit difficult to view in my opinion. I know you can edit it this, just wonder why it was done like that? Has anyone else found this? or is it just my bad eye sight

Why does we need use internationnal numbers to call, support lines. And when we asked 10 to 15 a line for an internationnal call to find an answer at the support, we lose more time than calling a local provider. (yes for playing music there are other address) The problem is: we are not enough interresting to have a reply from the nearest PTC office in the same city. Wow ! Our monney is not too bad enough ? Still waiting the return of the person who begun our support call two/three years ago... perhaps he lost his flying ticket ? Well for a world record, it could be one. hum... My second question is : How many times will all questions stay without replies.

Finally found the solution for this. Limitations of other solutions:ProMenubuttonPreactionSet() and ProMenubuttonPostactionSet() work forMenu-Manager (mode-specific) menus only.PRO_WINDOW_CHANGE_POST will be useful if there are multiple windows andone of them is closed. Correct Solution:I am using ProCmdBracketFuncAdd to catch the command.For this, we must know the command name which we can obtain from Trailfile.For "File->Close Window" the command name is "ProCmdWinClose". /*--------------------------------------------------------------------*/ /* Find uiCmdCmdId of the command to be handled */uiCmdCmdId close_window_cmd_id;status = ProCmdCmdIdFind("ProCmdWinClose", &close_window_cmd_id); /* Catch the command */if (status == PRO_TK_NO_ERROR){ ProCmdBracketFuncAdd(close_window_cmd_id, (uiCmdCmdBktFn) FileCLoseAction, "FileCLoseAction", (void**)NULL);} ProError FileCLoseAction(uiCmdCmdId command, uiCmdValue *p_new_value, int entering_command, void **data){ /* entering_command =

Hello All, I'm looking for material specs for high density polyethylene. Does anyonealready have them? Bye now, Leo Greene PrincipleE-Cognition Inc, Engineering Services, Video tutorialsPH: (919) 542-4771 Email: CapnG@E-Cognition.netWeb Site: www.E-Cognition.net <http: www.e-cognition.net="/>

Flange, Modified Tube, 3"ODthe M30 version seems to have solved this problem, so now the rename does not get cut at "like Flange, Modified Tube, 3That rapids group is doing a good job at keeping me happy with the speed. Now, there are still a bunch of problems here and there with the PDMlink software, but I thought to be fair and show an improvement that had bugged me for months.Alfonso-- ALFONSO MEDINA O.MECHANICAL ENGINEERISE Corporation

Hey everyone- Is there a way to convert a skeleton model to a regular model? Thx Andy

I recive on e-mail news from PTC . The oane who make to account I tink that chouse th recive e-mail in german, but now I whant to recive the news in english . What or form where I must to change the option that I can recive them in english?

Dear Users,can anybody explain me what exactly the following phrase mean,"giving up- peer appn and/or msg module is not alive"regards,Amar Vemanaboyina

I our current 2d cad system we can easily add a metric value (like diameter) into a engish unit file just typing a unit symbel in after the number. example: 20mm Is there an easy way to do this in Pro/e besides / or * by 25.4?

How can I view old PTC webcasts?

I was wondering if anyone out there has material spec for Corrugatedfiberboard. We have a material callout here. But I have nothing to verify that it isright. Can anyone help??? Thanks Stan Kline Sr. Research & Development Designer L-3 Communications BT Fuze Products 101 North Queen Street Lancaster, PA 17603-3850

Hi,I need to evaluate electronic mark-up software. Is anyone using software that they are happy with?Thanks,Dan SchurrSr. Product DesignerWhirlpool Corp.303 Upton Drive, Mail drop 0245St. Joseph, MI 49085dan_schurr_aerotek@whirlpool.comPh: 269-923-4656Fx: 269-923-6966

Hello all, I am a new user and I'm really lost! I use Mechanica Wildfire 2.0 (without Pro/Engineer) and I want to know which system units are defined by default and how to change them. I've read that in Pro/Mechanica the system units by default are Inches-Pounds-Seconds. Also I've read that in Mechanica there are no units, it only works with the values you enter... Is that correct? And I think... if there are no system units, how can you know, if the result is meter or milimeter or ... Thanks a lot.

Anyone out there have a model of the Carrlane Clamp CL-250-HTC NO the one is on the carrlane wep page that want to willing to share? Federico PerezCad operator TPG Inc.

we are facing most problem in bending and rip etc.

I have a Pro-e file with the extension .crc.Any one know what the extension .crc is?Thanks Robert ParsonsDesignerGilbarco Veeder-Root7300 Friendly Ave.Greensboro, NC. 27409Phone 336-547-5604 This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.

Hi all, Is there a way to make "component outline" in Pro/E as can be done in "Product view"? (In shaded view - make colored body edges - outlined in black) this can be very helpful to quickly understand bodies with many features

Gentlemen,I am in need of examples of companies that have, or are switching from Solidworks to Pro/E. I have received a document stating that there is but one such case, that of PT Tech. This sounds rather suspect, but the implications are seriously hindering our ongoing efforts.Any references please,Haben Sie einen WunderbarenTag.Have a great day.Gregory Richards

Does any one have a clear version of sheet 4 & 5 of SAE J1926 I have one but the small text in distorted in the dim charts soits very hard to read. Robert ParsonsDesignerGilbarco Veeder-Root7300 Friendly Ave.Greensboro, NC. 27409Phone 336-547-5604 This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.

As usual, I made a fool out of myself but not just trying this first. Imust admit that I had never tried to actually paste something into the iconeditor in Pro, but I just figured that it would not work. I just alwaysassumed (and we all know where that gets one) that the copy/pastefunctionality in the icon editor was just for use inside of the icon editor.Not true!You CAN paste things into the icon editor in Pro. I used Alt-PrintScreen todo captures on the icons that I wanted, pasted into Paint, and thendownsized to 20 x 20 pixels, the size of the Pro icons. The results werenot all that whoopi, but it does work, and it at least gives you some placeto start. I did download a free icon editor as well, and that really didn'thelp a lot, because utlimately you still have to copy and paste into Pro,and the results were about the same as coming out of Paint. That could havealso been the icon editor that I chose as well.Thanks to all the respondents. Here's the responses that I received:I was

sorry... but seems like I suddenly haven't gotten any emails from theexploder... or at least not from the groups that normally have a fairamount of traffic... You know where to find me... Paul Korenkiewicz FEV Engine Technology 4554 Glenmeade Auburn Hills, MI, 48326

Dear All, I know that this topic has been discussed many times... but want to discuss it with you because of a personal esigency... I need to know which of the 2 systems is : 1. The fastest in building parts from a macro file (that is without using the GUI) 2. The easiest to build parts from a macro file (or some other way) and to have them built correctly 3. The system which is mostly used in industry Please document your thought by pointing to some document or some technical review!

Have wildfire2 with Mechanica student version, and am having trouble using the large deformation option (greyed out) - just wondering if this is supposed to work in the student edition?

Thanks for the quick replies. It seems that there are a lot of sitesout there providing free and commercial fonts. I did not get anyrecommendations for a specific font and I will just have to sort outwhat we want and go from there. Thanks, Ron Grabau Responses below: Hi Ron, Interesting question. I have been looking for something like that for along time and keep coming up empty handed. I wonder how one would goabout creating a custom font. We have the same issue with another laserprogramming system. Don Hello Ron - Perhaps you missed this exchange occuring last July. Randy Fosterphosterh@insightbb.comP. E. Support812-331-7798 ==== ==== ==== ==== ==== ==== ==== ==== ==== ==== ==== ==== ==== ====Try Googling for "free true type stencil fonts" Here a good site I've used before:http://web.simplythebest.net/cgi-bin/search.pl?realm=STB&q=stencil <http: simplythebest.net=" fonts=" stencil_fonts_2.html="> -Brian Ron, The site below is pretty good for having fonts. Although it ma