Archive Read Only

Creo 2.0 will not let me run with out this. I tried installing it and it says it cannot be found. Creo opens and I get the message saying it will not run and will shut down anyone know anything about this

I HAVE NO PROBLEMS CREATING A SYMBOL BUT WHEN I INSERT THE SYMBOL IT NO LONGER ALLOWS ME TO INSERT THE SYMBOL AT A 0,0 LOCATION OR DOSE IT ALLOW ME TO EXPLODE IT.I CREATED THE SYMBOL AS A FREE (0,0) INSERTION POINT.WHAT AM I MISSING?

Last night I went to a user group meeting for Solid Works and in two weeks I am going to a user group meeting for Pro. Brian Martin mentioned that he had start a new user group - CPUG - if I'm not mistaken. I just wanted to follow up and see how Brian's user group meeting went and to report back on the difference between the two user group meetings that I will be attending.Thanks,Dale

Good morning everyone,I need your help in how to start doing creo . I know the features but I do not know how to apply it. Also, I do not know where to start from.Any ideas , thoughts , or video about this.Kind regards

Hi all, i have just started working with Creo 1 & wanted to see what enhancements have been made. I cannot seem to find any kind of release notes. Under the file tab there is Help, What's new? but it tells you nothing, am i missing something?RegardsJohn

Hy, Someone can remember me who change the start file name by default in pro engineer?

Running WF4.0 M220 and PDMLink 9.1My pro_format_dir option has stopped workingwtpub://PDM-Production/Products/xxxx/yyyy/formats/Any suggestions?Seems to work after I manually navigate there the first time but seems odd.TIAScott R

I'm new to Creo 2.0 (From 2001) and I need to measure between two planes.So far, I've had no luck using Measure Distance. Can anyone help ?TIA

Does anyone have a chart or a link to an explanation of all the icons thatcan show up in a model tree? efefefefefefefApplied Research LabsUniversity of Texas at AustinCarol FlyMechanical Designer(512) 835-3397Fax (512) 835-3259efefefefefefef

I'll start off by giving my opinion: It s##ks. I find that stupid pop-up window, which sometimes hides behind the main one, completely useless. I'm struggling to figure a way to excluse what I want, without everything going away. Another BAD IDEA and another reason I'm staying on WF4. This, and the fact that for the last few days I've struggled to get dwgs done in creo that I could have easily done in a day in WF4 (without the hated ribbon), and the struggles I watch my Engineers go through because they're using creo, validates my decision to stay on WF4. Gah!Anyone else care to chime in?

Hello I wonder if anybody knows where this version of the Creo 2.0grateful ......

If so, how?

I'm trying to create a script that will move some zipped files off of a DVD and unzip them.I can't assume the computer will have winzip or 7zip. I want to do this with just standard Windows commandsIf I right click on the zip file, I can pick open in Explorer, and it shows me the files inside the archive.Any ideas how I do this from the command line?David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550

Is it possible to calculate the bending moments and other properties of a cut from a solid model of a mechanica calculation?

how to make the type of projection into first angle in Creo 1.0?

I am trying to setup an internal spur gear where the inner (smaller) gear is fixed and the outer (larger) gear revolves around. While I can constrain the motion of the 2 gears by fixing the appropriate DOFs, this is not compatible with the gear tool. I've tried to use the cylinder and other joint connections without success. Any suggestions?

We recently have switched from Product Point to Windchill 10 (nightmare all in itself) One user's ProE sessions keeps reverting back to the old ProductPoint server within Server Manager. I have started it without any configs, use the dm_remember_server set to no and it still remembers the old server EVERY TIME!All the users open ProE with the same Icon that I have shared off the server and nobody else is having this issue. I have exhausted my knowledge of where this damn Server could be remembered. We are using Creo/Wildfire 5.0 M080 and I will appreciate any help at all.Thanks, Erik

Return Receipt Your [proecad] - List Digest, Sep 20, 2012

i am getting files from a supplier and getting an error when i attempt to open them.has anyone experienced this before? solution?

Is there some way to show the model accuracy in the model tree?

When did PTC stop filling in hole information in the .hol files?Starting at 9/16 they do not have any information for clearance holes.Why?

If these are too big to come through the exploder and you want a copy, emailme and I'll send them directly. Thanks, Doug! efefefefefefefApplied Research LabsUniversity of Texas at AustinCarol FlyMechanical Designer(512) 835-3397Fax (512) 835-3259efefefefefefefFrom: Pogatetz, Doug (ES) Carol, These should help. I got them from someone on the exploder, who got themfrom someone on the exploder. ~Doug

Hi All, I've recently started paying attention to, and using this web site. I think it's a great source to learn and guide others. I also think it's a great place for the users to influence PTC. I've been a PTC user for more that 15 years, and they need a little influence. Anyway, PTC has tons of customers, but this web site seems to have less than a thousand active users. Come on all, lets start using this as an everyday tool. If you browse the website, but don't input to it, go ahead and ask a question, or make a comment. I'd love to see more discussion, polls, tutorials, enhancement ideas, . . . You fill in the blank with what ever you have. Please say something. What do you all think? Can we make this a learning tool for all of us?

How do I find my product code