Augmented Reality

Hi All – when printing and cutting out a ThingMark symbol for use on a physical device for an AR experience, where the backing of the device that the ThingMark will be affixed onto is very dark or black, is it advised to leave a very thin white border around the ThingMark hexagon to help with scan recognition with the ThingWorx View app?  Or is this generally not required?Thanks!

I always get the error "The connection was reset" in latest versions of Chrome and Firefox. Anything else seems to work fine. Something I have overseen to configure?I have trial version 1.11.

Hi ,i try to download vuforia studio for mac following the instructions of video tutorial,but wich password i have to use ?any password is wrong.

Hello,I just started my trial with ThingWorx Studio. I have downloaded and installed the software. When I attempt to complete the sample Quadcopter project, the canvas area just shows up grey, I cannot see anything that is in it. The same thing happens if I try and create a new project.Does anybody know what I'm doing wrong?Thanks

Hi All,I would like to read and show the microsoft excel data, in order to display the values from excel through a label randomly in Thingworx studio.Basically i want to simulate the use case of the data coming from sensor.What is the best way to do that.Can anyone guide me how to do this?Thanks and Regards,Mayur Agare

Hi Experts -I am looking for some help related to Thingworx Studio. I am able to pull property value from Thingworx and display within AR experience. But I am trying to update the value of a property of my Thing in Thingworx platform from my AR experience. Basically, like a toggle button within the (Vuforia) AR experience. On pressing the toggle button, I would like to update a property of my Thing. Is this even possible? Any help is highly appreciated.Thanks,MubarakMessage was edited by: Sushant Pandey moved thread to ThingWorx Studio

Hello,I am walking through the ThingWorx Studio Tutorial and am invoking functions from a button.  When I perform the exercise and Preview, the label is shown and rotates as expected.  However, when I scan the target on my iPhone and select the Experience, the button shows, but the label does not. What I do get is a half-toned ThingMark and the text "Point camera at ThingMark" underneath.  I point the camera at the ThingMark that triggered the Experience, but nothing happens.I have placed the 3D Label above the plane, so it should always be visible, but it is never shown.Note - I did upgrade my iPhone to iOS 10.3.1 today.Any idea what I could be doing wrong?Many thanksEdward

Hello All,I have this issue with Thingworx Studio and I would guess that there can be some issues with firewalls but I can't solve itHere are extracts from one log-file:14:30:46] info: [twx-studio:projectHelper] Building ves-ar-extension app: Studio Sample - Import 3D Data[14:31:00] Reloading Browsers...[14:31:21] error: [twx-studio:auto_configure] 500 'Unable to retrieve service details.' Error: connect ETIMEDOUT 52.202.124.16:443[14:31:21]     at Object.exports._errnoException (util.js:1026:11)[14:31:21]     at exports._exceptionWithHostPort (util.js:1049:20)[14:31:21]     at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1085:14)Here are another problem at another site. (other firewall)error: [twx-studio:basic] user/pw failed verification XXXX@XXXXXXX.com null Error: tunneling socket could not be established, cause=getaddrinfo ENOTFOUND 8080 8080:80[10:33:54]     at ClientRequest.onError (C:XXXXXXXX

Hello,I am walking through the ThingWorx Studio Tutorial and attempting to bind the Pressed JS event of a Toggle Button to a Card. According to the Tutorial I should get a list of services to bind to, of which Visible should be included.  Instead, there is just the title Services, but no services listed.I have tried logging out and back in again, to no avail.Any idea what I could be doing wrong?Many thanksEdward

Hello,Anyone knows the units that the canvas uses in the widgets?Specifically on x/y/z distance and the width of the ThingMark.ThanksRegards

Hello,I have been using TWX studio for almost a year and I have seen the evolution of the tool since its early beginning as ThingX.I shared already some feedback about the tool and most of the points had taken in consideration so that’s good but they are still some points that are decision makers (at least on my company) for our future AR/VR platform.3D PoI interaction: Use Points of Interests (PoI) directly linked with a 3D model, 3D label or 3D image allowing the users to interact with this PoI as links to other documents, webpages or other pages of the same experiences.Image/Shape recognition: The ThingMarks are good and useful on some use cases but they are others when image or shape recognition is useful and a best approach than a marker (eg. Have AR overall information of a building, a plant or a microgrid from outside).Get remote resources (Web, other databases, windchill): Having all the resources uploaded with the experience is not the best approach if we want to maintain an h

I have access to a spherical display system (Science on a Sphere, see Science On a Sphere - Wikipedia ). I have the capability to generate content on the surface of the sphere; it starts with a flat model and gets warped by SOS utility programs in various ways.I want to generate a Thingmark that can be displayed and utilized the same way that a flat Thingmark is used.Has anyone generated a Thingmark for a curved display yet?I would think that someone would have thought of using  a flat decal printed and stuck on a curved surface, but so far I haven't seen anymention made of that in this community/discussion board (I searched on "curve" and "curved" and "surface").Any thoughts / observations?Thanks,Charlie

How to locate the rotation center of the model ? when I rotate the model with a sliderBar,it moves, and just ran out of the bounds.I also encountered the same problem while i trying  to zoom the model.I'm seeking for your help,thanks.

Is the intent to respect the hololens spatial map such that the closest object, physical or digital, take precedence?  It appears I can see models that are below floor level, so I assume by default the spatial map isn't being used to determine visibility?

Since the last update I am not able to create new experiences anymore.The old expereinces are working still fine.I can create a new experience and view it Preview, everything just looks fine.Publish does not give any problems or failures.When I scan I can choose my experience, so the Thingmark and the experience is recogniced.After a while I get this failure message.Failed to load tracker data(1 of 1) First failed src is: vuforia=vumark://vumark?id=((thingworx:thing))Any ideas ?The only thing that was changed on my side was the Studio update

HI,     I have data in following josn format , which is coming from any function.I Have to display the data in Data Grid widget.How can i do that?  var data =   [ { "id" : "1", "name" : "test1" },       { "id" : "2", "name" : "test2" },       { "id" : "3", "name" : "test3" },       { "id" : "4", "name" : "test4" },       { "id" : "5", "name" : "test5" }]Regards,Quadir

Hi ,   i have text input widget and a button.I want to invoke a function getName() on the button click at the same time  i want to pass the textbox value to this function.How can i do it?

Hi everyone. Im' trying to create an experience from a model that contain some decals (such as a LCD display or a company sticker). Those decals are visible in Creo Parametric. Is there any chance that i could keep those decals in my experience ? As far as i know, when publishing this file in pvz format, the decals are lost. So there might be another format or way of doing it ?   Thanks for your help,   Michel

Hi ,      when i try to validate my ThingWorx Experience Service , it gives me following error      Invalid Server: <!DOCTYPE html> <html lang="en"> <head> <meta charset="utf-8"> <title>Error</title> </head> <body> <pre>Could not contact the ThingWorx Experience Service, verify the server is running. Error: tunneling socket could not be established, cause=connect ECONNREFUSED 127.0.0.1:80</pre> </body>   Regards, Qadir

Hey there!I am currently working with Thingworx Studio and I have come across the following problem:I wanted to upload a .stp file (STEP) which should be supported by thingworx Studio. But when I want to add it, it fails.I have already tried to add it with the Run CAD Optimizer Option ticked, but I got the sam error as well.The size of the 3D shouldnt be the problem as I have already tested it with a smaller one and that failed as well.Any suggestions?P.s.: If you want to see the log files, you will have to tell me where to get them because I have no clue where to find them. Thank you so muchin advance Message was edited by: Sushant Pandey moving the thread to ThingWorx Studio page for better visibility as the question is on ThingWorx Studio.

Hi,Is there a reason that non-secure URL's such as http://... can be used in Hyperlink Widgets, but secure URL's such as https://... do not work?The links I have created using the widgets work just fine for the non-secure links, but I had reason to try to link to https:// locations and the displayed hyperlink on an iPad does nothing at all, as if the hyperlink was just underlined text.Any ideas?As always, many thanks,Brian

in my project , I navigate to MyThingmark , it says retrieve the thingmarks from developer portal,i click on the link and fill my credential, but there comes error.All proxy is disabled, still it is not retrieving the thingmarks.

hi ,      When i try to configure my Thingworx studio, it gives error, auto configure failed. When i see the log i got following error.

Hello everyone,   I have very often some issue with the publish of an experience. The log says nothing :   [10:39:06] Reloading Browsers... [10:39:08] Zipping  dist/phone [10:39:11] Starting Upload [10:40:57]  [0mPOST /api/publish/  [0m-  [0m- ms - - [0m [10:41:07]  [0mPOST /api/publish/  [0m-  [0m- ms - - [0m [10:41:07] info: [twx-studio:projectHelper] Building ves-ar-extension app: Creo 4.0 [10:41:08] Reloading Browsers... [10:41:10] Zipping  dist/phone [10:41:10] Zipping  dist/phone [10:41:13] Starting Upload [10:41:14] Starting Upload [10:43:07]  [0mPOST /api/publish/  [0m-  [0m- ms - - [0m [10:43:08]  [0mPOST /api/publish/  [0m-  [0m- ms - - [0m [10:43:09] Zipping  dist/phone [10:43:10] Zipping  dist/phone [10:43:12] Starting Upload [10:43:13] Starting Upload [10:45:07]  [0mPOST /api/publish/  [0m-  [0m- ms - - [0m [10:45:08]  [0mPOST /api/publish/  [0m-  [0

Hello,I couldn't find a comprehensive list of supported phones for ThingWorx View. Can you guide me in the right direction, please?Here's what I came up with after some research:iOS devices, according to App Store: https://itunes.apple.com/gb/app/thingworx-view/id1076700285?mt=8Requires iOS 9.1 or later. Compatible with:iPhone 5siPhone 6iPhone 6 PlusiPhone 6siPhone 6s PlusiPhone SEiPhone 7iPhone 7 PlusiPad AiriPad Air Wi-Fi + CellulariPad mini 2, iPad mini 2 Wi-Fi + CellulariPad Air 2, iPad Air 2 Wi-Fi + CellulariPad mini 3, iPad mini 3 Wi-Fi + CellulariPad mini 4, iPad mini 4 Wi-Fi + Cellular12.9-inch iPad Pro, 12.9-inch iPad Pro Wi-Fi + Cellular9.7-inch iPad Pro, 9.7-inch iPad Pro Wi-Fi + CellulariPad Wi-Fi (5th generation), iPad Wi-Fi + Cellular (5th generation)iPod touch (6th generation)Android devices, according to Google Play: https://play.google.com/store/apps/details?id=com.ptc.vuforiaviewRequires Android 5.0 and upAccording to our tests, it works best on Samsung phonesWindows