CAD

Even though it's the same program, calculations take longer in Mathcad Prime than in Mathcad. I used a converter from Mathcad to Mathcad Prime, but does anyone know what functions take longer to calculate? Also, if there is a way to improve this, what functions should I use? If anyone has any idea, please let me know.   Translated by the moderation using Google Translate -----------------------------------------------------------------------------------------------   同じプログラムでもmathcadよりもmathcad primeの方が計算に時間がかかります。 mathcadからmathcad primeにコンバーターを使用したのですが、どのような関数が計算に時間がかかるかわかりますか？ また、改善策があるならばどんな関数を使用するとよいのでしょうか。 少しでもわかる方がいましたら教えてほしいです。

Using CREO 10 .0.4.0 When we save a drawing that has several sheets it always goes to the last sheet. This seems counterintuitive to us and my users would very much prefer to have the first sheet or the current sheet displayed once the save has happened. I looked for a config option but could only find "Default open drawing sheet"  which controls whether the 1st sheet or the last open sheet is displayed on opening a drawing. Is this just CREO 10 behaviour or is there a way to set CREO so that it doesn't default to the last sheet on saving a multi sheet drawing?

Hello everyone,could someone explain why i am getting different answers in the programs e and l.Is there a way to get same output from both the programs? Does it have something to do with for loops?the output should be like program e.Attached Mathcad 10 file.  

While performing iteration for neutral axis calculation for Doubly Reinforced Concrete beam, I suffered an error.Kindly help me ASAP.Thank you 

How to get my Product code for MathCAD 15?

I installed the student version following the instructions but once started it gives me this error and I can't use it. how can I do it?   Translated by the Community Moderation using Google Translate.    ho istallato creo versione studente seguendo le istruzioni ma una volta avviato mi da questo errore e non riesco ad usarlo. come posso fare?  

Hi All,I am new to Mathcad. I have a table where the first column is the material name and the second to fouth columns are material properties. I would like to add the table to a worksheet. When I select one of the materials, the three properties of the material will then be used in subsequent calculations. This can be done easily in Mathcad Prime 9 or 10 using Combo Box, but Mathcad 15 does not have this feature. Could someone give some guidance as to how to archieve this in Mathcad 15? Thanks in advance.

I am looking for a post processor that I can use to output cam files for a Mazak VCN510C-11  VMC machine. Does anyone have one or if not can you point me in the right direction to find one? Thank you

I need to access the Creo API, but the toolbox has proven extremely hard to set up. The directions said that in Visual Studio, it would build without errors, but there were indeed errors. From the error messages, it seems that it does not run on Visual Studio 2022 and requires Visual Studio 2015, which I'm having many other issues installing on account of it being incredibly antiquated. I am rather new to coding but need this for a project for my university. Please help if you can!

To all Pro/E WF4.0 and Creo5 gurus,Is there a way to use variables inside the paths in a config.pro file?Example: system_colors_file c:\pro\Garland\%USERNAME%\sf\syscol.sclThis does not work. Saved the syscol.scl from inside Pro/E to have old school background. Restarted Pro/E, no beuno.Weird thing is though, the one for trail file location works:trail_dir c:\pro\Garland\%USERNAME%\sfgo figureIf anyone has any insight on this I would appreciate it. I just want the users to be able to store things like system colors in default user location that is specific to only them.Thanks!This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Hello Community, Using Creo View, I'm trying to insert a stamp into a model, specifically into a PVZ file, but I'm having trouble. The stamp tool button is always grayed out and can't seem to be enabled, see screenshot below. Can anyone tell me why this is happening and how I can fix it, so I can insert a stamp, as explained in the support article here: To Insert Stamp AnnotationsOn the Markup tab, in the Annotations group, click Stamp. The stamps gallery opens.In the stamps gallery, click the stamp you want to insert and point to the model view.Click where you want to place the stamp. The stamp appears in the foreground and the pointer reverts to a selection pointer. In the upper data panel View Content list, a corresponding Stamp entry appears.To move or resize the stamp in figure window, select it to display its anchor points and then perform the following actions:Move - Drag the anchor point shown in the center o

I have Mathcad 14 on an old laptop and need to deactivate its license for possible installation on a new laptop. How is this done? 

I have Mathcad 14 on an old laptop and need to deactivate its license for possible installation on a new laptop. How is this done? 

I have purchased the mathcad prime 10 student edition on last 14th Oct. But I couldn't receive any email or physical product that including product code. How can I get that?Reference number:942747636

I lost my license of Mathcad Prime 7.0

I am using Creo Parametric 7.0.  Background:I am producing a mdl/dwg for manufacturing which uses the final machining mdl as a merged part.  I am doing this to create a mdl/dwg template for automation which will be driven by the final machining mdl. Majority of the dimensions from the final machining mdl are needed for the manufacturing dwg. Question:Outside of manually recreating these dimensions in the manufacturing mdl, does anyone know if there is a way to display the dimensions from the merged final machining mdl in the manufacturing dwg? Thank you!

I have a matrix with three columns. I want to have an if-like statement that searches column 1 and 2 and if both are negative, the result is the maximum of column 3. In this example the result would be 0.0071.Working in Prime 7.   

    Greetings I have created a function to calculate some parameters.           I want also to enter the variable of Lvi and Lvd that are scalars but I have not been successful I want to add to the code f.c the part where you enter the overhangs, I added the matlab script and the language c in mathcad I can do it only until without overhangs if someone can give me some clue how to add that part of the algorithm that I have shown in the matlab script would be of great help, the result should be coordinates in x in the first column and y in the 2nd column.cd "C:\Program Files\PTC\Mathcad Prime 7.0.0.0\Custom Functions" && cl /I. f.c /LD /link /out:f.dll /entry:DllMain mcaduser.lib && cd "C:\Program Files\PTC\Mathcad Prime 7.0.0.0" && MathcadPrime.exe  

I converted a program that was working in mathcad 15 with the mathcad prime 10 converter and started the calculation, but it froze midway and the screen became white and unresponsive.Please let me know if there is a cause or solution.---------------------------------------------------------Translated the topic from Japanese to English using google translateSubject - mathcad prime 10 計算ができないBody - mathcad 15 で動いていたプログラムを、mathcad prime 10 のコンバーターで変換し計算を開始したのですが途中でフリーズし、応答なしと白い画面になります。原因や対策などあれば教えてほしいです。- By Community Moderation Team---------------------------------------------------------

HiI have two identical scripts with identical input data. However, the output vectors differ. What is wrong with the second one??  Thanks in advance!  

I've attached a snapshot of the Mathcad sheet where I'm working. I need some guidance on how to use the minimum and maximum functions in Mathcad to obtain the FTMF values.  

When the numeric values for the coefficients are substituted into the symbolic solution for an algebraic equation which was solved using the symbolic "Solve" function, the answer does not agree with a numeric solution obtained by using either a solve block or the symbolic engine when all the coefficients are first assigned their numeric values.   See the attached worksheet.  Worksheet was created in Mathcad version 10.0.1.0 Tom

Lizenz aufeinmal weg

Hi,I see that PTC released a maintenance release for Mathcad Prime 10. So I wanted to ask if PTC is still maintaining Mathcad Prime 7 - and whether it would release maintenance release for Prime 7 - if a critical security vulnerability on Prime 7 is identified. 

Hi @Werner_E  Do you mind showing me how to change this program for the min distance to find the distance between the red point and all the green points come before it regardless the min distance      like ...In the previous topic we found the nearest to the red point ...I need now to change it to find the distance between the red points ana all the greens come before it and the calculation of the distance should be separet for each red point ..that means if we consider to the third red point the target greens will be the ones between the second and the third points only without involving the previous segments      Thanks in advance