CAD

hey, i get this weird message in my Creo. i have no idea what caused it and i have no idea how to search for the feature which causes the 'break' also my model tree is half grayed out and i have no idea why. does anyone know the cause?  i have little experience with Creo and my company has very little technical support so forgive me if theres no enough information. 

I am trying to create a push button control in Mathcad prime 10, like a Mathcad-15 file attached here, please help me to create the same in Mathcad prime-10.Thank you.

Hello Again.  CREO Frustration week 10 - Just checking - is it really not possible to design "smart assemblies" were you can suppress parts/groups using parameters, unless I have access to PRO/program ?  I just happen to not access to this feature. Is it really not possible to do this using relations / parameters? Thanks in advance. 

Hello.  I am using Creo parametric 7.0.12 and Windchill, I am trying to make a copy of a drawing + part - keeping their association so I can re-name them as a new part number and make changes. However, the part I am trying to copy is an earlier version of the component in Windchill. so this is a level of complexity.  Our structure isabc.prtabcs.prt (this is the sheetmetal instance)abc.drw I want to rename them all to be dfg.prtdfgs.prt dfg.drw I have added to my workspace all the versions I would like to copy - both of the part and the drawing. But when I try to save as, I get an error!. It appears that the sheetmetal instance that I have  is preventing the save.  I get the same error message described in this link - but the solution does not work. >> https://www.ptc.com/en/support/article/CS74897 << I have tried to delete the instance, but the option on the family table is greyed out - so I am not able t

Hello Team, I'm trying to use a Merge/inheritance feature for creating another assembly file for kinematic/dynamic simulation assembly, so when the base model is changed by another engineer, it's easy for me to update either by manual or automatic option in Merge/Inheritance. Now I create every model name_Kinematic for all the parts, it takes a lot of time for me. Please help me with any automation. Regards,Sridharan

Hey,   I am trying to assemble a cylinder of wood that contains springs, the cover is flexible for movement as people will jump on it. Is it possible to assemble it the way I think on Creo ? If yes, how should the assembly of the cover. P.S. the cover should be rubber, so it can be move.   Thanks in advance for help   Best regards, Tariq

Using Creo 9.0....I have some legacy parts that were named with the description parameter and all my new parts have been named with ptc_common_name parameter. Is there a way for my drawing parts list to pull either name if i have an assembly with both new and legacy parts? I was thinking of adding a repeat region relation that is along the lines of the code below. Also, i don't want to modify the original part files. Is there a way to do this because my way isn't working. /NAME is new drawing parameter for the name columnIf description existsNAME = asm.mbr.descriptionendifIf ptc_common_name existsNAME = asm.mbr.ptc_common_nameendif

When modifying a .hol file, I'd like to specify the drill depth to more precision than 0.1. I have tried the following:  &DRILL_DEPTH[.01] however it still rounds to the nearest 0.1. I am using Creo Parametric 8.0.8

Hello. I stumbled randomly on the following:It seems that Mathcad defines atan and tan^-1 differently. Look at the attached picture. I thought that atan is the same as the inverse tan but it seems that it is not the case. Please, clarify this for me. Shouldn't atan and inverse tangens be the same definition? 

Is there a way for Creo to automatically generate a drawing tree? I'm not talking about the assembly drawing tree in Creo interface. In ASME Y.14.24 Types and Applications of Engineering Drawings, section 16, there's a Drawing Tree section. I'm talking about this. I attached the screenshot of it here. I have to make this drawing tree, and we have a lot of parts. It just doesn't make much sense to do it manually if Creo already has a feature for this. Thank you so much!

Final Part to the prerequisite studies for Laplace Transforms In Electric Circuits.   RLC Higher Order Circuits Continuing Notes And Solved Examples and Problems.   Section 1: Introduction To Operational Amplifier (Op Amp) circuits.   I. Several parts of chapters 2, and 3 from Coughlin and Driscoll Op Amp Textbook.Providing notes and solved examples to build the knowledge before enteringSchaums topics on Opamps. Often using the examples from Coughlin and Driscollto assist elsewhere in Schaums Op Amp topics.   II. Schaums: 1. Amplifier model2. Feedback in amplifier circuits3. Operational amplifiers4. Analysis of circuits containing ideal Op Amps5. Inverting Op Amp6. Summing circuit7. Non-inverting circuits8. Voltage follower9. Differential and difference amplifiers10. Circuits containing several Op Amps Followed by a sample Op Amp circuit called Servo Amplifier to build interest in Op Amps from Coughlin and Driscoll's textbook.   Section 2: Operational Amplifier

so I'm familiar with the help docs and other items in the help/support site on setting up a pen table (table.pnt)  but is there a specific "color" callout for cable part files?  or is it all wrapped up under pen 1? I dont want to set PEN 1 to black because ive got other entities on the drawing i want to have in color. Ive tried isolating the quilt_color to a unique pen and that doesn't work.  Any thoughts?  Or should I file an enhancement?  

Croe7.0.0.0ParametricDevelop Environment：javaHow to display CommonName on CREO feature tree.Which API should I use.thanks.

Why are the selection sets restricted to a Figure... Why are they not like groups in Creoview that way I can use them in any figure. I know i can copy them but then i have to manage the copy all indivudually based on figure. I wanna organize things by Primary Structure. fluids electrical. ect...Why do you make it so difficult?  Do you even try to use  your own program to detect these frustrations?Or add an option to make it a universal group or figure based only for organizational purposes.

As per the original post.    Newbie here. How  can I increase the font size in the "Message Log Bar". Also, need to increase font size in dimensioning dialog in modelling.  I think I lost my config settings when i tried to fix myself. See screenshots. 

How to remove offset between drawing and annotation as seen in image 

I need to move an assembly to a new file location (new tooling project). When I save a copy and rename the assembly, none of the parts or drawings move over. I don't want to rename the parts, because the current part #'s are established.Is there a way to move over a full assembly with parts and drawings without renaming parts and moving each part and drawing individually?Currently using Creo 4.0 I don't have access to Windchill, but the company does have a Windchill licenses if needed.

Any can help me regarding this case 

  

I am using Creo Parametric Release 4.0 and DatecodeM140H team, i want to relocate the dimension attachement point. i used this ProSelectionDimWitnessLineGet but its not working. kindly help me to over come this issue. thank you

I want to get several options as shown in picture. could someone help me with this.Attached the Mathcad sheet. 

I am using Creo Parametric Release 11.0 and Datecode11.0.0.0custom map keys not working after new creo install. creo_parametric_customization.ui file did not change.start up load directory the same.

Hello,I'm using Creo Parametric 10.0 and I have a quesiton.Is it possible to have table on the drawing with lengths of each profile?Example how I want this table to look like:2 PCS | Profile 50x30x2 | 250 mm3 PCS | Profile 30x30x2 | 150 mm1 PCS  | Profile 30x30x2 | 120 mmI've created generic profile model with instances and I'm changing lenght of it by "making it flexible".I want to have this "flexible" length in table.Is it possible? Thank you all for your help.

I get a 403 Forbidden error when trying to retrieve a license file over the internet.

This error occurs when we try to access the LV Wiring assembly model in our top level model.  Any suggestions on a solution?Regards