CAD

I am trying to post out a thread cycle through creo for a Haas lathe. On the cycle line itself it only posts out g76 g98 f20. I've looked through the post processor and changed a few things in the threading cycle area but nothing has changed.Any ideas? Thanks,

I just opened a ticket but this looks like a bug and I am wondering if any of you have encountered this and have a good work around. It looks like in Creo 9.0.7 its not respecting independent layer status. When I try and hide a curve in one view it effects the top drawing layer status even though it is not set as such.     We just made the jump and have found some other small issues but this is the biggest one for us.

Hi everyone, how can I replace a dimension on the view that I want, instead of the view proposed by creo? Best regards. Michele Barile I want to place the dimension proposed by this command, but not in this view, in another view.  

Hi all,   I'm running Creo 2.0 Student Edition. Under Collision Detection Settings>Optional Settings, I only have the option for "Sound Warning on Collision". I'm looking for the option to "Stop when colliding". Is this a limitation on the student edition?   Thanks in advance

Creo 7.0.10   Does anyone know how to search for sketcher dimensions or relations using the search tool? I am debugging a model with sketcher relations. I know there are two relations in the model that are sketcher relations from reviewing the message log of the part. Any search tool query that would identify the sketch or feature that is using the sketcher relations would make my life easier when dealing with these.     Do not use sketcher relations unless there is no other way to capture the design intent required. It makes debugging models convoluted. The only sketch relation that is unavoidable that I am aware of is when the trajpar parameter is used in a sweep and needs to be controlled with a relation. There may be others, if you know of one or more post it here for reference.

Hi Guys, I want to share the model to the vendor but vendor can view only they can’t measure manually and modify it. Is there any option for this? Regards, Aj

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0In sheet metal mode, are there any function to set limitation of Sheetmetal to protect overlap each other when unbend?Now user use Flat pattern preview to check after finish Sheetmetal design.However, user don't want to fix after check by use Flat pattern preview.They want some command to alert overlap when during design sheetmetal on that time.Please share some technique to help me.

I am using Expert Moldbase Extension Release 15.0 and Datecode15.0.3.0N_3030_N cannot be retrieved

Hello, I'm having some trouble understanding which programming tools for Creo Parametric are free and which require licensing. When I open the "ReadMe.txt" file in the otk_java_free folder in my Creo Parametric installation, the is a note about downloading the user guide: --otk_java_free User's Guide-------------------Please refer to the PTC Creo Object TOOLKIT Java User's Guide.The User's Guide is available in a PDF format. This file is located at:<creo_loadpoint>/Common Files/otk_java_doc/otk_javaug.pdf-- When I open that document, the title is "Creo Object TOOLKIT Java" user guide and it includes a big section about licensing and needing a Creo Object Toolkit license. When I try to load the sample "InstallTest" sample I get an error trying to load it. I do NOT have a OTK Toolkit license but I do have a Creo Parametric License. Can anyone explain is this sample SHOULD be able to run on my system and maybe point me to a resource to get it running? I have

Has anyone else noticed that sometimes ModelCheck will flag a word as misspelled even though it is in the user_words dictionary file? I even cut and pasted the word from the ModelCheck results flagging it as an error into the user_words file and the next run it gets flagged again as misspelled. The word is CONTAINMENT. We are running Creo 9.0.5.0.

Hi Guys,Can anybody to simplify this program?I must run for “k” and “i” twenty times the block.CarlosRomero

Start file (MCS) entries in my ModelCheck configuration folder:PRT_PARAMETER MY_PARAM NONE EQ PDMPRT_PARAMETER MY_PARAM STR EQ TEST1This is working OK in Interactive mode,MC creates the parameter as Designated:Error message when running MC in Save mode:Missing items PARAMETER: MY_PARAM Type: STR(see the attached screenshot with results from Interactive and Save Mode)Creo version 7.0.2.0

Hello experts I have a question about volume rough seq. Is it possible to add some minimum default radius on every motion change tool path endpoint to avoid sudden motion stop and start for a smooth machine run? please check the attachment for detail. regards AsifFisa

One legacy feature that has still not been integrated into Mathcad Prime, is the ability to provide companion XML files that integrate Custom Functions documentation into the Mathcad interface.  Legacy Mathcad would read these XML files and add the new functions to the list of internal functions in the Insert Functions panel under their own, specified Function Category.Legacy Insert Function Panel While Mathcad Prime does contain a Functions panel for inserting built-in functions (can be triggered with <F2>), it does not allow for incorporation of categorized Custom Functions into that interface. For DLLs containing a large number of Custom Functions, this can be problematic for users to know which functions to use, what they do, what parameters are needed, and the proper function syntax. I've managed to create an open-source add-in, CustFunc, that brings back the Legacy insert functions behavior for Custom functions, reading the function names, categories, syntax,

I am using Creo Parametric Release 5.0 and Datecode5.0.6.0 The 3D Sketcher dimensions are marked with (E) like a symbol. I am inquiring because I cannot find any correlation between modifications, relations, and parameters.   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- I am using Creo Parametric Release 5.0 and Datecode5.0.6.03d 스케쳐 치수에 심볼 기호처럼 (E) 표기가 되었음. 수정 및, 관계식, 매개변수에 연관관계를 찾지 못해 문의 드립니다.

hello everyone!I want to set this equation equal to zero and find the unknowns c and k. Of course, I have to use the gamma function for this. Does anyone know this subject?

I want to optimize solution based on conditional operators in Mathcad Prime 8. Please help 

Hello, I am inputting a vector into a for loop, but struggling to get a vector back for the output.  I would appreciate any help.  I could not figure it out from other examples on this forum.  I am wondering if I am making an error in the initial step of the for loop?  Thank you.

I am trying to modify the built-in weld symbol (ISO) to be used with the Weld Tool for 3d annotations. However, it seems that the Weld Tool is building the symbol from left to right in the code from a bounding box around the individual elements (weld size or weld length). The tool will stretch or shrink the symbol to fit, however if I try to add elements it will also try to place a bounding box around the elements that I add and it ends up way too long. A manually placed symbol looks correct, however, a symbol placed by the weld tool will show spread out with empty space in between the elements. If I move the custom lines from one group to another, they will stretch the symbol in different ways.Creo 9.0.2.0Does anyone have experience with this? Any suggestions on how to modify the existing symbol without disrupting this built-in auto-spacing?

Hi, I am looking to delete a family table in a part. I remember in the past when the deleting the table I got some sort of warning that the instances would become standalone. I deleted the table and did not get a warning. I file the part as well as each instance in my workspace. I checked all out and then checked all in. There were no errors on check in. I looked at Windchill commonspace and the generic and instances were modified. The reason why I am breaking this table up is because I am trying to delete an assembly in common space. I am actually deleting an entire folder that is not related to anything else in Windchill. Its all standalone that I imported. I get a warning that it can't delete the generic because I need to also delete the instances. I don't know why? I broke the table and am selecting the generic and the instances. Maybe I'm missing something? WayneF

We  do have the same exact question as here:https://community.ptc.com/t5/3D-Part-Assembly-Design/How-to-delete-weld-symbol-parameters-and-shorten-its-dashed-line/td-p/244691 However that question is unaswered and dates back to 2016, so our question is if there has been any progress on that front, we want to: - delete the weld lenght. For example in the fillet weld they are the "style" checkboxes. - shorten the continuous and dashed guide line under the symbol numbers, since having just the fillet size and triangle symbol (+ the all-arournd circle in some cases) doesn't require much lenght of the lines below and by extending over it also takes space uselessly in the drawing. We have loaded the symbol from the weldsymbol folder into creo, but we are unable to edit because there are so many symbol on top of each other due to fact that the symbol can handle all options, so to find the option for length and shorten the lines seems impossible. Does anyone have a

Hi, I am looking to create a lot of api to creo, but I have not yet decided which language to use. There are so many languages, and I am a lit bit lost.Can you tell me the main difference (utility, strenght, weakness, ...) between Creo API like: VB APICreo Toolkit CObject toolkit OTK C++J-link (OTK Java Free)OTK JavaWeb.link (javascript)Thanks

Here https://community.ptc.com/t5/Mathcad/One-electrical-task/m-p/926303 was all OK!

The Creo Parametric config options for Web.Link confuse me a bit. This support article gives the recommended settings for Web.Link: https://www.ptc.com/en/support/article/CS156638. Before reading this article I was only aware of the web_enable_javascript options, so that is all I enabled.  Which means my config looks like this: Funny enough, everything with Web.Link works fine. I can read files from my local file system, manipulate and read data in my Creo session, etc. But according to the config options, this should be disabled. So what do the web_link_read/write options actually do? Anyone got an idea?