CAD

Dear Team,I have created a custom parameter into the assembly, Now I want to call this parameter into BOM table. I know how to use repeat region, but I am not able to call the assembly custom parameter into drawing BOM table. Please help. 

Please see https://www.ptc.com/en/support/article/CS311063.It turns out View Adapters are currently not supporting different representations for publishing Inventor assemblies and always visualize "Master Rep" only.It is even documented that way in "Creo View MCAD Adapters Installation and Configuration Guide", see the attached screenshot. Sadly that's not acceptable for our users and use-cases within Windchill. Designers expect the published assembly to look like they saved it, showing the active representation in Inventor, not always Master. It's dangerous too, because components might have to be surpressed, different color-encodings are used for certain components, etc. All is lost by blindly visualizing "Master Rep". Please consider implementing proper behaviour (like implemented for Creo) in a future release. Thanks!

 

I cannot find the setting, I believe in the DTL to change the default behavior for new projected views.  What we want is for the view to come in WITHOUT any of the annotations displayed.  I have seen this behavior in the past (at different company/installations) but we see all the annotations that are in the acceptable orientation display and we are forced to do a bunch of cleanup work.  We would like to eliminate that.  thanks in advance!

I will rendering an animation... and i will use FFmpeg....In the Help-Center is only this litte text.... Add an AVI codecSeveral AVI codecs are defined in the customization file ani_customize, which is found in <installationdirectory>\personality\sd_customize\AdvAssembly_Parametrics. You may add a new codec to this file if desired. Please review the comments in the file for more information. Now in the "ani_customize" i will add FFmpeg to creo.... but it dosen't work... FFmpeg is installed on pc. How does it works? Any tutorial available??  Here the code lines:;; customize the AVI codecs available for save animation (codec must also be installed on PC);; First string is the 4 character code (i.e. "MPEG") - second any description;(anim-add-avi-codec FourCharacterCode Description)(anim:anim-clear-avi-codecs)(anim:anim-add-avi-codec "FFMP" "FFmpeg")(anim:anim-add-avi-codec "MSVC" "Microsoft Video")(anim:anim-add-avi-codec "DIB " "Uncompressed")  I hope

I am looking to see if its possible to delete this "Root" designation in the PVZ. Highlighted in picture below.

I want to solve three equations with three unknowns and display the solution on a 3D graph with two points - the roots of the equation.I can’t find Vyacheslav Mezentsev’s utility (Mathcad 15 or Prime) for such drawing two close surface. Help please.

hi All I am facing an issue with a 3D assembly. Everytime I open the assembly with a simplified representation (not Master or automatic) and regenerate the model, the model changes partially to wireframe (not all parts, only some of them) and these parts are not selectable anymore. does anyone have and idea what the problem here is? Creo 7.0.12.0 with Windchill 11 thanks in advance  

How do you modify the config.pro file on Creo 4.0 M-150.

All the variables are defined , However I couldn't figure out why it is not working 

I need to import .prt file in solid works with minimum data loss and in editable format. Also with feature recognition as accurate as posiible.  I tried importing one .prt file in solid works but data and feature recognition is not properly extracted. Please help me with this

I am using Creo Parametric Release 8.0 and Datecode8.0.8.0Is there any possibilty to copy as external representation in toolkit? (similar to Copy As External command in Creo)

Hi everyone, I'm experiencing an issue with Creo 9.0.1.0 Parametric Educational Edition, as the program does not let me export drawings in PDF format if they contain certain symbols.For example, the following drawing is exported correctly:While if I change the radius dimension to a diameter one, containing the symbol  Φ instead of the letter R, as in the following:I get this error:And the export is not carried out.Has anyone experienced the same issue and know how to solve it?Thank you very much,Andrea.    

Happy New Year!     This month’s challenge is based around statistics, specifically permutations and combinations around shuffling a deck of cards. It’s inspired by this article: https://www.mcgill.ca/oss/article/did-you-know-infographics/there-are-more-ways-arrange-deck-cards-there-are-atoms-earth   Your challenge, should you choose to accept it, is to perform the following in Mathcad Prime: (Basic) Calculate the number of ways to shuffle a deck of cards. (Standard 52 card deck, no Jokers). (Basic) Calculate the number of ways to shuffle a deck of cards if the suit (heart, diamond, spade, club) doesn’t matter. Calculate the number of ways to shuffle a deck of cards consisting of just the face cards (jacks, queens, and kings). If you could shuffle the deck one time a second, how long would it take to shuffle each possible way? (Express the result in hours, days, or years, whichever is easiest for people to grasp.) How long would it take to shuffle the face cards until

Hello,        

@Werner_E wrote: 3) Use a small program to create vectors of your choice - you can chose to use the same argument order as in the definition of a range. Similar routines also were posted here from time to time and a command like this should be part of Mathcad/Prime out of the box. Unfortunately it isn't. I see that the topic is from 2016 and it is now 2024 but i had basically the same issue. Have i to conclude that it is still not fixed to create easy a vector in some range?   ----- Initially posted in this topic

Is there any way to change the line weights of a sketch made in a .prt or .asm when you print out the .drw it's used in? The pen tables don't do anything, the the line style can change the color, but doesn't seem to do anything about weight, changing the options in the 3D cad app doesn't seem to propogate the change to the PDF.  Any ideas? Thanks! I'm on creo 9

Dear ladies and gentlemen,   We have 2 Mathcad licenses, but I can't find the product code for them right now. If you need any more information from me in this regard, please let me know.   We currently have the situation that we have 2 licenses and had to change the MAC addresses for them and reinstall them at the same time. Now we are faced with the issue that Mathcad 15 can no longer be licensed with the current licenses because Mathcad is too old.   So my question to you is, do you still see a possibility of getting Mathcad licensed despite a new installation, or are the licenses no longer usable for us in combination with Mathcad?   Thank you very much for your effort.   R. Bürger   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- Sehr geherte Damen und Herren, wir haben 2 Mathcad Lizenzen, den Product-Code dazu finde ich aber gerade nicht.

Dear all,  Currently I do make BOM by using a templated table in 2D environment. The quantity parameter is working just fine because this method counts how many parts of each do exist in the assembly.  However I also need the quantity in my individual part drawings and my struggle comes from this need. To tackle this issue I tryed to use the EMX BOM but is not suitable since I need to change a lot of parameters manually and everytime I update the BOM, most of them change automatically to the original ones. However the filling of the individual quantity parameter works just fine. My question is: Is there a possiblity to create a button to fill and update the individual part quantity parameter, only, in order to appear in the individual part 2D drawing? Thanks in advance.

Hi everyone,   Please help me adding the full file path name in drawing print out. Is it a printer setting or creo config's setting? Let me know please.

Hello,I am using Creo 7.0.9.0 and have a question about adding notes to a drawing. I am creating GD&T feature control frames by manually typing it into a note so I can put it on an angle, as seen below. (This was a drawing I made a while back).  Now, I am trying to re-create this same thing on a new drawing, but the feature control frame is hovering above the leader line, as seen below I have tried to copy and paste from the old drawing to the new drawing and it still causes the 'hovering' look. I've gone through drawing properties to see if any config settings would be applicable but nothing is standing out. It appears as if something in our drawing template has changed but I'm not sure what. Would anyone be able to help me out so that there is no gap between the leader line and feature control frame?

Creo 7.0 I've been working in an assembly for a week. Just today when I add anymore cad geometry to it I get a "frozen" symbol. If I fully mate the part down it appears correct until I hit ok. Then it jumps to another location and in my model tree I get the pause or "frozen" symbol. I can delete/re-add mates, or try reinserting the parts, but I get the same result. Not sure what's going on. Maybe I accidentally triggered an option somewhere? Any help is very much appreciated. Thank you!

I wanted to create an animation of my robotic hand. The first step is to save the mechanism playback file so I can import into the animation menu. My problem is to I don't know how to create a reciprocating motion, where the robotic finger begins in a straight position, bends, and then returns to its original straight position. I need to know how to reverse the motion for my robotic hand in mechanism playback. I can only make the motion from the straight position and bend without returning to the initial straight position (reciprocating). My idea is to make a separate servo motor and analysis for bending motion and make another one for back straight motion so I can import this 2 mechanisms playback to my animation so it will looks like "reciprocating motion".. However, I am not sure if this will work and believe it to be  complicated. Is there a more efficient way to produce reverse/reciprocating results?

Anyone can tell how do we change the font size of the creo UI. I mean the overall size in ribbons, model tree and all?

Hi guys,   I have a released assembly drawing with 8 child level items(refer attachment). I want to revise this assembly to remove item 6 and add a new part item 9. Now when revising an assembly we usually make the required changes directly in assembly model and then go to drawing at a later stage. By then the BOM auto updates and newly added item takes number item 6 even after fixing index.   I have below questions regarding it 1. Is it possible to skip item no. 6 in BOM table during the above process and how? 2. Is it possible to make changes in BOM table before releasing a drawing so when we change anything in assembly later on it should not affect our released drawing bom and its sequence?  3. Is it possible to strikeout item 6 in BOM when it is removed from the assembly or something similar so that when a user reads the next revision drawing he is able to understand the changes done?  4.  Any advice on BOM revision best practices for Creo 4.0  &n