CAD

I am using Mathcad Prime Release 9.0 and Datecode9.0.0.0When searching for text or math in a document using the Find box and Find Next button in the status bar, collapsed areas are expanded but do not re-collapse if nothing is found. For documents with many collapsed areas this is difficult to manually re-collapse each one.1) Is there a simple way to collapse all expanded areas in a mathcad document?2) Can the find algorithm be updated to re-collapse any collapsed areas where nothing is found?My current workaround is to lock all collapsed areas, but this is not ideal either.Note: Mathcad Prime 8.0 did not have this issue, since find did not search any collapsed areas.

Helloi am having issues with units when i use the solve function. I have never had this problem before but it seems like whenever i use the solve function, some of the standard SI units are deleted in the process (the unit isnt bold blue anymore, which is what indicates that it is a unit). This is very frustrating because i need to copy the whole solved equation down and solve it again with a standard = then it comes out in the right unit, but i have never had to do this before, and in most cases i also need to define the units again in the copied solution... i attached a png of one of the times this has happened - and now it is happening in all my new files    

Hi, I am using Creo 9 and I have a geometrically complicated part I would like to copy hole positions from. Basically I'd like to create a rectangular piece that contains the holes from the original file. In the image below you can see the original part in the middle, and the new part shown as a rectangle. I basically want to fill the area between the original part and the rectangle with material. Any ideas how to do this without major headache?  

I'm currently working on an assembly project in Creo and have run into some issues that I hope you all could help me resolve.How to Fix a Component in an Assembly?I've been trying to fix a particular component within an assembly. Could someone guide me through the steps to do this properly?What Does the Square Symbol in Front of a Component Name Indicate?I've noticed that some of my component names in the assembly feature a square symbol in front of them. What does this indicate, and how does it affect my assembly?Steps for Creating a Section View?I need to create a section view of my assembly for analysis. Can anyone provide me with a step-by-step guide on how to accomplish this in Creo?How to Make a Component Free-Moving in an Assembly?I want to allow a component to move freely within an assembly, separate from the fixed components. How can I set this up?Your guidance would be immensely helpful for my project. Thank you in advance!

I just created another pagination, but this time I want the 2nd portion to be on sheet two. Can someone walk me through this. Most of the search on this were over 10 years old.  

I am unable to start my MathCad 15. Getting the message "The application failed because its side-by-side configuration is incorrect. Please see the application event log or use the command link sxstrace.exe tool for more detail." I am not a computer expert, and I believe to best fix would be to re-install my MathCad 15 app. What is your advice? How can I re-install my MathCad 15 app.

Hi All.In Creo 4.0 Toolkit how to Get Surface or edge or Curve from the view.if anyone knows please Help.Thanks. 

"Creo Direct / Elements Modelling Express" Hi,when turn on my sotware, a label shows me a countdown about the connection. Why? I have some limitations in "Express" version?Thank in advance   

I'm in a situation where I have to modify a SOLIDWORKS part from Mcmaster using Creo Parametric. I successfully imported the SOLIDWORKS file into Creo, but it appears as a 'dumb solid' and I don't see any original planes that were used in SOLIDWORKS.Has anyone else faced this issue? If so, what's the best way to go about creating planes for modification purposes? 

Initially posted in this topic   Hi all, i can understand this for single dimension vx and vy, but what about 2 dimensions Mxy and Mz? Could anyone explain what cspline() returns and how interp() works? Thx in advance!LertNote: i use mathcad 15.

Could someone explain "scaling" in the display options when viewing simulate results? If it's kept at zero is what's displayed a realistic deformation?      

In our MFG file we have ~400-600 sequences per operation and doing the reordering of the of the sequence takes time.To apply these sequences, we used UDFs and in 2-3 clicks the sequences are applied.Using Process Manager, XML templates with priority options is not a good idea for us, the reason being we have a bunch of custom macros and will take longer to apply in Process Manager.Are you facing this problem on your MFG file?Do you have any solution or workaround to improve time during reordering of the sequences?I understood for other CAD Application reordering is very fast this is why CAM department is looking now for a different CAM software. 

I bought and installed Mathcad 9 student version, on the day of installation everything worked fine, however today I wanted to open the program and now it opens Mathcad express, I tried to activate the license for the file again, however I get a message that says "(-9) Invalid host."Looking at some forums I tried to solve the problem by following what was indicated, however the problem was not solved.Then, checking the host, the one on my network does not match the one in the license file.How can i fix this?Thanks in advance for your response

remote user contacted me about two computers they use for simulation that are running Creo 5.0.1.0.  All the workstations I knew about have been upgraded to Creo 9.0.4.0 and we'd like to upgrade these two computers to 9.0.4.0. How can I see which extensions, options, etc were installed with 5.0.1.0 so I can make sure to enable the same extensions with 9.0.4.0?  

I have Creo 9 and 10 installed but Creo 7 is our production version. When Creo 9 or 10 gets installed the browser in Creo 7 stops working. Browser is set to Chrome.   Any idea how to prevent 9 or 10 from changing the browser in 7?   Install is a local install.

Hello, allI use volume rough with a large tool and then use local milling ( previous sequence ) to remove rest of material with samll tool. while I want to keep some area not to be machined by local milling step,  can anyone help me on this?  thanks    

Hi 1. I have a issue with displaying assemblies (using Creo Parametric 8.0.7.0). Sometimes I have different family table instance component displayed on assembly view than is defined in family table and displayed in assembly tree. What might be the reason? 2. I have also an issue with drawings. Sometimes on drawing view (with assembly) I have missing component but when I opening assembly that is presented on the drawing it is complete. What might be the reason? 

I am computing phasor values of voltage & current waveforms at each sample point along the waveforms.  I want to plot all of the resulting phasors, aligned to a-phase voltage.  To do this I simple need to multiply each phasor by unity at an angle that is the conjugate of the a-phase voltage angle at that point.   Is there a way to create a polar shift operator 1@-arg(Va)?    See attached Prime 8 file for how I'm doing it now (multiplying by the conjugate of Va and dividing by its magnitude). thanks,russ

I am using Solidworks now ( I know Booo) but I have some files from my previous job I would like to look at and they are not opening. The parts do but the drawing does not. can you help?   

HI, I have successfully installed the MathCAD Prime 30-day trial. However, I am unable to open a pre-existing *.mni file (Mathcad Native Interface file).Does Mathcad Express support them? Is there any way to convert them to a file format recognizable by MathCAD Prime?Thanks! Eddy

Hello! I've been a MathCAD user for 5-6 years now, but this last subscription cycle I told myself would be the last. Instead, I wrote a prototype application that just barely meet my needs, but shows an example for what cloud CAE could be. I would love to see PTC adopt something like this into their offerings, implementing storage, global variables, syntax highlighting, autocomplete, and hooks into Onshape. The graphical nature of MathCAD is neat no doubt, but I think the future is plain text with a super simple syntax. It's free, so please check it out if you're interested!https://fa.rad.cm

Purchased licence and tryed to activate it on mathcad 5.0 several times, no luck.Installed mathcad 9.0 -> seems to be working, but now error message "You have reached the maximum amount of licence requests avalible for your product type"

https://community.ptc.com/t5/Mathcad/Transformer-Energization/td-p/450548 I want to access the worksheets, but they're in pdf format. Can you provide the worksheets in Mathcad format?

I just paginated a BOM/Table and am wondering how to get the footer (in my case) to be added to the 2nd segment of the table.    

Hello, When I try to install the licence for creo student using setup I have an error message.What can I do ?Thank you