CAD

I am using Creo Parametric Release 4.0 and DatecodeM140When a user tries to create an assembly and he gets a pop up box that says " xxxxx.asm could not be created". This worked 2 weeks ago but now suddenly fails today.Here are the errors that I facedxxx.asm could not be created

Hello, I'm learning Mathcad and have been working on a problem using the software and had an idea of autogenerating a drawing using whatever variables I am given. To do so, I am using the XY plot graph function. I have created the plot and created some lines using my variable to get a general shape, but each line is infinite. I can't seem to figure out how to make each line a line segment that has an actual start and end. I have attached my Mathcad file which has all of the different variables and the plot, as well as some CAD drawings in there that show what my auto-generated drawing is attempting to look like. End goal is to have different loads being shown as arrows as well applying force to the wall structure.The plot is at the very bottom after all my calculations because I have still been messing with it. I have tried to use boolean equation stuff and matrixes to no real success. I am using Mathcad 15. The problem is a basic statics problem where I solve for loads on a

Hello Community, I am using ProParameterWithUnitsCreate, on Creo 9.0.2.0,to add a parameter to a model. However, everything I have tried to make it work has failed.  The code I am using is below:{...ProParamvalueSet(&testVal, p_value, new_value_type); err= ProParameterWithUnitsCreate(&target_item, test, &testVal, NULL, &testInit);...}target_item is a valid ProModelItem, test is a valid wchar_t*, testval is a valid ProParamValue, and testInit is an unitialized ProParameter. I have followed TestParams.c file to check if I did anything wrong, but it appears I have not.  I have also looked at this article, Article - CS383949 - Creo Parametric Toolkit API ProParameterWithUnitsCreate() fails with error PRO_TK_BAD_INPUTS on specific machine (ptc.com), but it is unclear to me what registry file I am supposed to change the unicode_encoding to True on. Does anyone have any idea as to why, with valid inputs, I am receiving the PRO_

I have created washers and given contact between washer and abutmant with friction 0.1. Still the washer is flying at 0Hz in modal analysis

Hello.I am trying to simulate dynamic effects due to the braking of a rotation movement, considering the rigidity of my structure using static position and Force Balance Analysis.Using the prototype, or a similar machine, we measured the deceleration at point 2.I'd like to apply forces to the center of mass of each body and correct the magnitude of deceleration according to the radius, in a parametric procedure, so I can easily simulate several positions.We know this is not 100% accurate but is good enough for our application. Force 1 = Acceleration point 2 * R1/R3 * Mass body 1Force 2 = Acceleration point 2 * R2/R3 * Mass body 2Force 3 = Acceleration point 2 * R3/R3 * Mass body 3 Strategies to parametrically change the magnitude of Forces:Option 1: R1 = using a Measure of Position inside Mechanism of point 0 to the rotation pointProblem: The analysis does not run. I don't even receive a error message. Nothing happens.I believe this is happening because first Creo n

Arbortext IsoDraw allowed for a visual angle definition via the creation of oriented grids (see included image).  Trying to match these IsoDraw angles via x, y and z orientations in Creo Illustrate but can't come up with the "math" to do it.  

Hi experts,Does anyone know how to solve this issue?the system show that it couldn't find the answer.any useful method that can help me to solve this?  

Just looking for a little guidance with a drawing. I need to show pattern dimensions on a drawing - component pattern - but I want to show the pattern dimensions between the 4th and 5th pattern members (or 5th and 6th). Using "Show Model Annotations", if I select the pattern, it shows the pattern dims between the 1st and 2nd pattern members. If I select the 4th pattern member, it only shows dims from the component (not assembly dims). I'm a long time Pro/E user recently coming to Creo 9. This was easy to do before, but it appears that PTC has disassociated the assembly position dims from the components, so you have to jump through hoops to show assembly dims - which is horribly annoying - but in this case, I can't find the hoops to jump through. Query select allows selection of the component (or any feature of the component), but if you query to the assembly, it only shows dims for the 1st to 2nd pattern members. Is there a way to show pattern dims in a place other than

Hi,I created a Mapkey just to test, to open a .prt and save as .stp and close    mapkey f13 @MAPKEY_NAMEdemo;@MAPKEY_LABELdemo;~ Command `ProCmdModelOpen` ;\ mapkey(continued) ~ Trail `UI Desktop` `UI Desktop` `DLG_PREVIEW_POST` `file_open`;\ mapkey(continued) ~ Trail `UI Desktop` `UI Desktop` `PREVIEW_POPUP_TIMER` \ mapkey(continued) `file_open:Ph_list.Filelist:curvedriven_pattern.prt`;\ mapkey(continued) ~ Trail `UI Desktop` `UI Desktop` `PREVIEW_POPUP_TIMER` \ mapkey(continued) `file_open:Ph_list.Filelist:<NULL>`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist` 1 `base_gear_1.prt`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist` 1 `base_gear_1.prt`;\ mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `EmbedBrowserTimer`;\ mapkey(continued) ~ Close `main_dlg_cur` `appl_casc`;~ Command `ProCmdModelSaveAs` ;\ mapkey(continued) ~ Open `file_saveas` `type_option`;~ Close `file_saveas` `type_option`;\ mapkey(continued) ~ Select `file_save

Hi. I need help for  calculation in Mathcad Prime , (with numeric values and units)  using formulas from the annexed  file. Can someone help me please?     

I am using Creo Parametric Release 4.0 and DatecodeM150I am facing some problem regarding dimensions witness lines in Creo drawing. Every time I regenerate, or check-in check-out part, dimension witness line gets disturbed (elongated in/out of view). Problem seen specifically for Parametric dimensions which are converted to ordinate dimension.

Hihis might sound trivial but can someone help input a partial differential equation(PDE) like the one in the image?   Regards Raghu  

Hi all is there any option to display other parameters (e.g. PTC_WM_PART_NAME, PTC_WM_PART_NUMBER etc.) in the list of windows in the QAT drop down menu?rigth now, it is only showing the PTC_WM_NUMBER  

Prime is not allowing to change the units with the range variable getting error messageFor example in the evaluation I am getting unit as m but i want to change to in or cm it does not allow  

Hi,Is there any config.pro or .dtl settings to change the format of the fractions?see below for example the default is 4-3/8 I want to change to  4 3/8. or 4  3/8(double space depending on the fonts I am using)  

Hello, So I have those 5 curves, and I want to make a surface (with surface menu or boundary blend, either way is fine). Problem is surface is not responding to select those 5 curves together, and rightly so due to their positions and they "estimated-by-my-eye" result that it would come out. The closest thing to a solution is to take 2 of those 5 curves, and then use the rest as guides. Which works up to a point BUT... 5 curves are not full ones. 3 of the 5, are partial ones, I want to select them from up to a point. Also it is worth noting that those curves are all boundaries of the desired surface.  1. I connect 2 surfaces. One is partial, one is full curve. All fine so far.2. I add one partial one at the left boundary. Still fine, surface closes in to the desired shape.3. I have to add 2 curves, as right boundary for the right side. One of which is also partial. Either way, partial or no partial, CREO does not accept 2 curves to be recognised as one and adde

Hi,Is there any way to change the default family naming instances?like I need 001,002,003,004 etc for new instances.I tried with open with excel replace all.  But the moment I save this tmp excel file the family table disappears. Also tried with Mapkeys to carefully delete INST1 and write 001 that also not working. I have 100+ parts require family table instances. Any common idea to rename the instances?   

Hey everyone,i'm a newbie in creo and i'd like to add some axes on my drawing by using ''Show Model Annotations''.It works but i want to display the names of the axes, like A_1 and A_2I haven't that problem before when i changed my config file into mmks_config.      

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0When I select a quilt in the model and hide it, the Model Tree does not update accordingly anymore*. As a consequence, it is not possible to show the quilt again by acting on the Model Tree.* In Creo 7 it all worked fine.

hello there, I just downloaded Creo 9 and while working on my project suddenly the application shuts down . I opened Creo again but it is not responding at all, it has been three days now and it is still not opening or responding. Has anyone got a similar issue?          

Hi dear!You can take my credit card and do unlimited shopping.PS The pin code see below. Mathcad will not help!

Hi Folks, I have added an image (decal) to a part surface.  My assembly includes two of these parts.  However, only one of the parts in the assembly is displaying the decal.  The second part does not show the decal.  Any ideas as to why this is?  Thank you.

Hello, we download the CreoView-API 19.1  and find samples how to get files INTO CreoView.But our case would be reading CreoView files and extract the geometrie data. So getting access to the mesh elements and the document structure. Is this possible at all? Maybe somebody can guide us to the right documentation regards  Markus 

My interest very huge in this topic i want to ask you can you please tell me , What are the key parameters and inputs required for dynamic analysis of the Rocker Bogie Suspension system? , and also thank you for explanations video is very helpful for me.Original Topic Link

Hello all, Trying to figure out why certain pages come out blank when I print to pdf or try to save as pdf for the file linked below.   Shows up on the screen fine.   Same issue if I try saving as an xps file too. Thanks in advanceEduardo