CAD

The computer I have installed matlab 14 on doesn't have access to the internet

I am using Creo Parametric Release 3.0 and DatecodeM050I am trying to show fractional dimensions in inches, not feet-inches. For example, 1' 5-3/4" = 17-3/4".I have tried changing config-pro and I can't seem to find the right option.In the Dimension Properties window, the Nominal Value shows just inches. Why doesn't it show up that way on the drawing?Is there a way I can get it to?Here are the errors that I facedNone

Hello. Is there a way of obtaining the Fourier Series of a function f(x) symbolically (file attached)? Best regards,Sergey

I am using Creo Parametric Release 4.0 and DatecodeM150After changing the dimension of a feature (for example change length from 25 to 1000), all the font size and position of 3D annotations (include dimensions, 3D symbols, 3D finish, Datum Target, Note etc.) are changed. How to config Creo to avoid those changes?

Hello,We have large harness with about 250 wires. We designed it with using logical data from Creo Schematics.And we have problem with four wires. They are don't shown in model tree and simultaniously don't shown as unrouted. Some segments of them appear in graphics window, I try to remove them but it doesn't work.I attached screenshot from Compare List - these wires have mismathcing but I don't know why.

I am using Creo Parametric Release 7.0 and Datecode7.0.9.0Korean language is not shown on 2D.Here are the errors that I facedKorean language shows like square box.

It can be used on the server side. On the customer service side, 7788@server will prompt to display an error " (-15): Cannot connect to license No solution was found in the knowledge base queryI am using Mathcad Prime Release 8.0 and Datecode8.0.0.0 -------------------------------------------------------Translated from Simplified Chinese to English at 8:41am IST on 15-11-2022 by vnamboodheri(Google translate)在服务端可以使用 在客服端7788@服务器 会提示显示错误“ (-15): Cannot connect to license在知识库查询也没有找到解决办法

The file type is not supported. Log file is located at C:/Programdata/PTC/Mathcadprime/Logs/MathcadPrime_Exception_20221114_092717.logI worked on this file last week without any problems. Can you recover this file, so I can open it again. It´s for my finals in shcool.

Want to use Matchad Prime 7 but it was written with Mathcad Prime 8How can I convert it or download Mathcad Prime 7?

I need a license

Hello!   Im from germany, so please don't mind my bad english 🙂 I've got a problem with Creo Parametric 3.0 on Windows 10 (64bit) The last weeks Creo works fine, but today I grabed accidentally my "Platzierung/Placement" button and now all the parameters disappeared. I can't do any new placements now. I already restart the system 2 times and completly reinstalled my Creo Software. The other buttons (Bewegung/move) working fine! The only thing I can do is "Alt +Tab" to make the Placement window visible, but I can't change anythink because when I click on it, it disappears again.   Thanks a lot for your help, and have a nice day!

Is there a work around for fixing the bom index of flexed components within CREO 6? I am unable to fix the index of anything flexed within a large assembly.

Program Id already expired

I'm trying to set a default text linespace in Annotation (19.0) but it doesn't work the way I try to configure the value. I use the following textstyle configuration. I can change Font and Color but the Linespace does not change.   (oli:sd-set-setting-values :application "Annotation" :style-path "Annotation/General/TextStyle" :style :STANDARD :title "Standard" :values '("Font" "arial" "Color" 16776960 "Linespace" 1.3 ) )  Should this be working this way or should linespacing be set somewhere else?

How to configure and use ModelCHECK

I have some advanced simulation entities in my model from when I had the license for advanced simulation, which I do not have anymore. But with the advanced simulation entities, creo parametric would not open simulate app at all. Can someone please let me know how to delete the advanced simulation entities from my .prt file so that I can access the simulate app? Thanks.

Whenever I create an animation in PTC Creo Parametric it is always the same size. It does not matter if I do it with rendered shots or not. For example, for my 10 seconds animation it is round about 1.5 Gigabytes.That is a lot. In my opinion Creo must store a lot of unecassary information. Does somebody know how to reduce this size? Why is it always the same size? I am exporting with 25 fps on Creo 8.0.4.0

When I convert a metric part to inch I get 12 decimal places on the drawing. how to I limit the decimal places to 4?     

I am tring to set the starting value of the summation as below. Prime 8 file attached. Want to be able to set k=r or k=0.  

Hello, Why solve block is unable to give the maximum value?

Hello,   On my part, I use the volume milling function to create a slot diameter 4.2mm at the bottom of a side pocket in my part. For that I use an end mill diameter 4 and it works well.     But when I try to use the cutter compensation (G41), nothing changes in the Gcode file.   I have other sequences such as profile milling and the G41 is correctly converted into the GCode. It never works with volume milling?   Does someone have an idea?   Thanks in advance

I have some files from the mid 1990s that were produced with MathCAD 6. The Express version will not convert them. Will the full version convert the to 8.0 Prime?

Hi Team,   I'm new to CREO. Working with HP. I wanted to run a command from windows command line to convert .mi files into .pdf file.  Could you please share the steps or documentation with examples.   Thanks, Som.

Hello all, Is there some way to set the filter in the lower right of the status bar programmatically to narrow the selection type?