Community

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.2Is there a report/qml/sql script to get the list of the licenses consumed both named& daily basis.

Hello ptc When trying to activate Modeling Express 6.0, to get my 72 hour key I am getting the following error in my browser "Internal server Error code 500".  As a side note, I have been having to do the 72 hour key for a couple of years now as I get a Proxy Configuration-Connection Failed error for automatic activation. This has not been a big deal as the 72 hour key is a bit of an annoyance but not that big of a deal.  Please see attached screenshots.

Hi,    I am migrating the Time-Series data from PostgreSQL to InfluxDB. In InfluxDB, there will be a separate measurement for each Thing in Thingworx, whereas in Postgres, all time-series data is stored in the public schema.value_stream table.    Now I do have around 1400 Things, each thing represents a device, actually, as per the use case.   My Quick question is: is there a limit on the number of Measurements in a single InfluxDB?   Thingworx Version: 9.1   Thanks,

Hello,I am a senior year student in university, aiming to implement my previous work experience using Creo Parametric/Schematics to generate electrical wire harnesses for our Formula SAE team. This way we will better know items and wire lengths needed to make our yearly wire harness for competition, both IC and EV. I personally love Creo and hope to help future members learn this program since it's seemingly necessary to work in some high level industries.With only a university free account, trying to prove that Creo is more than useful for our efforts my previous experience is somewhat mitigated for reference. I am hoping to maybe learn of some alternative means to generate the parametric intelligent wire generation. Also is colored cabling disabled for a free account? I've attached an image of my default parameterized spool below, adjusting the name to lowercase as per some support ticket entries I read prior but to no avail.  For one person on our team hoping to join a spe

I have two problems defining the spectrum:1. Acceleration spectrum2. Displacement spectrumI tried to replicate it in Mathcad 11 without success. I followed an example created in Mathcad 13, which includes the Boolean function formulations, but the program detected errors because some variables are not defined, preventing me from graphing them.Please clarify what I'm doing wrong.  

Is there a function to convert from decimals to fractions?

Requested Improvement: There should be some visual indication in the model that the dimensions have been altered using the Analysis -> Dimension Boundaries tool (referenced as Dim Bounds in help).  An analysis feature in the model tree would be helpful,  (This would also be helpful for turning on and off the analysis, or having different analysis scenarios)Also highlighting of the alerted surfaces would also be helpful. One color for more material another for less material. Or, one color for upper boundary, and another for lower boundary.Environment: Tested in Creo 10.0.8.0. Problem: When the Dimension Boundaries feature is used and active, there is currently no indication in the model tree. The risk is that an analysis could easily be left active in a production model.  Manufacturing could manufacture to the model expecting the model to match shown dimension values.   The end result is that bad parts could be made due

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.2We are operating in WINDCHILL as as SIMO multi-organization structure and would like to understand whether Windchill imposes any limitations on the number of containers(Create Container- fixed limit)—such as Products, Projects, or Libraries—that can be created and managed within a single instance. Are there any performance issues in future.?

Version: Windchill 13.0 Use Case: We have 2 subtypes of epmdocument called TypeA_generic & TypeB_instance under EPMDocument(Parent). Scenario - User creates a Family table objects , 1. If it is a generic then set the sub type of epmdocument as TypeA_generic & create corresponding wtpart subtype2. If it is a instance then set the sub type of epmdocument as TypeB_instance & create corresponding wtpart subtypeReason we have 2 subtypes is each has a different set of attributes /business logic & also have huge set of existing data in this format from a different plm software.Description: Approach 1: Using UPLOAD_SOFT_TYPE. But the problem is I need to enter these details every time when I add a instance (row). (there are possibilities that user might miss adding this param or provide wrong value by mistake) Approach 2: Using EPMDefaultSoftType.xml - using that I can set the subtype. but it allows only to identify epmdoc based on auth app (CREO)& then using

Currently we have the following relation in our startpartMATERIAL = MATERIAL_PARAM("CONDITION")This arranges that the parameter MATERIAL is filled with value of the material parameter CONDITION. This parameter MATERIAL is shown in the BOM.As with Creo 7 there is the multi-body added. In this situation it is possible to use multiple materials in one part. When this is the case there is a parameter PTC_REPORTED_MATERIAL created which contains the name (I think it's also the condition name) of the used materials separated by a ",", see below.  I thought I update the relation in our startpart (template) but it is not possible to use the relationMATERIAL = PTC_REPORTED_MATERIAL It then shows the error "Invalid symbol ' PTC_REPORTED_MATERIAL ' found.". Somebody a solution?   

I attempted to upgrade from CREO Parametric 11.0.4.0 to 11.0.6.0 this morning. When I go to start 11.0.6.0, it fails to start because it cannot find a .psf file. The only "reconfigure.exe" file I can find is in the C:\Program Files\PTC\FLEXnet Admin License Server\bin folder, which merely shows me the available license server. I cannot uninstall under Windows either. Is there a way to salvage this installation or manually uninstall and start over? Any help will be greatly appreciated.

I have a service which parses the CSV data which I am uploading and creates Thingworx entity (Thing) from it. Currently the issue I am facing I have to enter all the data in a single cell before uploading using ";"(semicolon) separater Is there any way I can upload a CSV which will have data in different columns  If I enter data in different columns (,) comma is getting appended automatically I did some research got below information :ThingWorx currently uses CSVParserFunctions.ReadCSVFile(), which only supports .csv, not .xlsx.Excel’s “CSV” exports vary by locale (using , or ;), so data works only with ;.Users must fill all values in one cell, separated by ;, before uploading.This process is confusing and not user-friendly. as mentioned above it is not user friendly to enter all data in a single cell with ; semicolon separated 

Hello All,I’m not sure why the textbox result in P10 doesn’t have a red box around it, while the one in P11 does.In P10In P11Regards,Sam 

This is handy.  I modified it today to use with G-Post (I have been using FORTRAN posts for 25+ years, and just made the switch this year).  This will build a setup sheet from your apt source file.  It should be easy enough to understand and tweak for your own needs.  I find it very handy for creating run books. I compiled using FreeBasic but it's easy to convert to your language of choice. You can create a .bat file and attach it to one of your Cimpro buttons:echo offcd %2@C:\anc\camsys\SetupSheetHelper.exe %1 Main Program:'*********************************************************************'SetupSheetHelper Main Program'Bryan Felsher                        01-03-10'Modified 10-17-2025 BCF for AUSTIN NC G-POST'*********************************************************************Dim Shared As Integer i=0,n=0,iTLNUM,SEQNUM=0,iPRNUMDim Shared As Integer FILTYP = 0, FREAD = 0Dim Shared As Strin

We would like to update our MultiCAD environment to a newer Creo version 11/12CS134024 shows that Creo 9 has compatibility to SolidWorks 2025 in Version 9.0.12.0.When does this support comes in Creo 10/11/12 ?We have a multiCAD environment and this holds us back to upgrade from 10 to 11/12.Regards,Marc

How can I check from JavaScript whether the content of an image property has a value or the default value 'image not available'?BRDimitri

Hi there ,To be honest I don't even know I need to multiple selective values in a matrix with selective values in another matrix . I used ( submatrix function ) however it didn't work :where m is a row number Here I want mathcad to multiple the first three values from both d and z Can you help me doing this ? the sheet is attached Thanks Yusra  

Version: Windchill 12.1 Use Case: How many company using ProjectLink to manage projects? Can you give some cases ?Description: How many company using ProjectLink to manage projects?Can you give some cases ?I am going to use ProjectLink but concerns issues happen after.So any cases like big company to use this ProjectLink ?Thank you !

I have a failed upgrade of CREO Parametric, 11.0.4.0 to 11.0.6.0, that I am struggling with. The error message is ERROR: Unable To Launch Application Because No Valid Configuration File (*.psf) Files Were Found. Articles from the Knowledgebase state to run "reconfigure.exe" from the C:\Program Files\PTC\Creo 11.0.6.0\Parametric\bin folder, but the only "reconfigure.exe" that exists is in the C:\Program Files\PTC\FLEXnet Admin License Server\bin folder and does nothing but see the available license server when run. Any help would be greatly appreciated. 

 

Version: Windchill 13.0   Use Case: We're looking into using Options and Variants in Windchill for managing our product configurations. All of the documentation I've read points to configurable products in Creo as the modeling mechanism. NX has similar functionality with PTS. Has anyone here gone the route of setting up Options with NX? Description: We're using NX for CAD and are looking at Options as a means of managing configurations for products. I don't see documentation on how Options would work from a modeling standpoint with NX (in Creo, configurable parts are used). Has anyone gone down this path? 

Version: Windchill 13.0 Use Case: In our design environment using NX + Windchill, we have components such as motors, bearings, and linear guides that are modeled as assemblies in CAD (CAD-BOM). However, in the EBOM, these are treated as purchased single parts that are procured as complete units from suppliers. For example, a linear guide assembly might consist of a rail, carriage, and screws in CAD, but in EBOM, it should appear as a single purchased item with one WTPart number.Description: We would like to know how other companies manage or represent this kind of data —assemblies in CAD that can reasonably be treated as single parts in EBOM (such as purchased assemblies or supplier-provided modules).How do other organizations express or manage these cases in their EBOM structure?Does PTC have any recommended or standard method for handling such data?Are there best practices for linking a CAD assembly to a single WTPart (purchased part),or configuration options to collapse the CAD

Hi,  I am in a same situation as this topic: https://community.ptc.com/t5/Windchill/How-to-Deal-with-Password-Protected-Excel-Documents-During/m-p/966639#M81742  where Windchill is not detecting password protected  and macro enabled office files where Windchill takes load and delay the process and then Publisher Failed the files. I saw you posted the Solution. Can you please give some more detail and how you implemented this solution. Did you configure some setting in Visualization Configuration Administration or WVS scheduler administration? Did you run some customer script to do this job. My aim is Windchill detect those file and through some kind of error so User know that the file is not appropriate etc. Regards Khalid Shamim Windchill 13.0.2 User.

I frequently find one or more of these processes consuming 100% of a core each. While I do have a plurality of cores, I do not particularly fancy using them for power-consuming bugs. It seems they are Chrome related, and that IE is no longer supported. So what can I do about it, except killing the processes when I find them surging? Windows 10 22H2, Creo 11.0.5.0, Threadripper Pro. Airgapped, no PDM.

Hello Community,  Please find the mathcad file in the attached it was developed in PTC91.In the following after the symbolic evaluation the units are not simplifying, for instance Ohms*Faradsshould be seconds, and Farad * Voltage should be Columbs, but 2.After Q2 as assigned as the result after the integration, when I try to call on Q2 it cannot be found, can someone please explain? Thanks